
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
L-Shaped Plastic Shelf Supports from Hughes Supply provide a defined 1/2 inch long and 1/2 inch wide shelf rest area that creates a flat bearing surface, so cabinet and closet shelves sit securely on a consistent ledge instead of a small point. The supports use a 5/16 inch fluted pin, which grips the bore wall and resists pullout, helping shelves stay in place during loading and unloading. These parts are available in almond colored plastic, giving a neutral look that blends into light cabinet interiors and closet systems. The supports are classified as heavy duty, aligning them with applications where shelves handle regular use. They are designed for 5mm and 1/4 inch bores, so a single style can be applied across different drilling patterns on the job.
The L-shaped design works with 5mm and 1/4 inch bores, so these supports can be used in cabinets or closets drilled to either common standard without changing hardware type. The 5/16 inch fluted pin engages the side walls of the bore, helping create a snug fit that resists wobble as shelves are loaded. With a 1/2 inch long and 1/2 inch wide shelf rest area, the support forms a stable ledge under the shelf edge, helping maintain consistent alignment across multiple supports. The almond colored plastic construction visually coordinates with many light-toned interiors, helping finished installations look clean and intentional.
These L-shaped plastic shelf supports from Hughes Supply are suited to shelf, closet, and garage organization applications, since they fall under the shelf supports product class. The combination of a 1/2 inch long and 1/2 inch wide rest area with a heavy duty designation positions them for shelves that carry everyday storage loads in cabinets and closets. Their compatibility with both 5mm and 1/4 inch bores means they can be installed in European-style cabinet lines as well as systems drilled with fractional bits. The almond colored plastic body helps them sit discreetly under shelves in light cabinet boxes, so the hardware supports function without drawing attention in finished residential or commercial casework.
The defined 1/2 inch long and 1/2 inch wide shelf rest area gives installers a predictable ledge depth for the shelf edge, which supports repeatable spacing and alignment when setting multiple adjustable shelves in a run. The 5/16 inch fluted pin design grips the bore as it is pressed into place, creating friction that helps each support stay oriented correctly while shelves are positioned. Because the product is described as heavy duty, it is aligned to uses where shelves are adjusted or reconfigured over time, such as closet systems or storage cabinets. Being designed for both 5mm and 1/4 inch bores, the supports simplify layout across different casework lines, since a single part number can serve various drilling patterns. The almond colored plastic finish complements many laminate and melamine interiors, contributing to a consistent appearance while the hardware carries the working load under the shelf.
The H-0627-2250/M is an L-shaped plastic shelf support classified as heavy duty, so it is suited to supporting shelves in cabinet, closet, and similar storage installations.
The 1/2 inch long and 1/2 inch wide shelf rest area creates a broad ledge under the shelf edge, helping distribute load and keep shelves seated consistently across multiple supports.
The 5/16 inch fluted pin bites into the bore wall, helping the support resist loosening when shelves are loaded or adjusted, which contributes to stable, rattle-free shelving.
These L-shaped supports are designed for 5mm and 1/4 inch bores, so they can be used across cabinet lines that rely on either metric or fractional drilling standards.
These shelf supports are made from almond colored plastic, which blends well with light-colored cabinet and closet interiors for a clean, unobtrusive look.
These supports fall under shelf, closet, and garage organization shelf supports, making them suitable wherever adjustable shelves are needed in cabinets or storage systems.
The Hughes Supply H-0627-2250/M L-shaped plastic shelf support brings together a 1/2 inch by 1/2 inch shelf rest area, a 5/16 inch fluted pin, and design for 5mm and 1/4 inch bores, so it suits many cabinet and closet drilling layouts. The almond colored plastic body fits light interiors, and its heavy duty classification aligns with everyday storage use. For projects needing consistent shelf ledges and dependable pin engagement, this shelf support offers a straightforward way to outfit adjustable shelving runs.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each | PGH627WAL Mfr# H-0627-8265/M | L-Shaped Plastic Shelf Supports 5mm & 1/4" Bores, Heavy Duty - Hughes Supply H-0627-8265/M |