Patwin Plastics 601 white tee molding is a non-toxic polyethylene "Flexene" molding that protects and finishes exposed edges in woodworking and surfacing projects, so edges stay cleaner and more consistent in appearance across your work. The 1-1/4 inch width gives coverage for typical panel and edge build-ups where a wider cap is needed, tying the face and edge together visually. A 7/64 inch kerf design lets the stem seat into a properly sized saw or router groove, creating a firm mechanical hold in the substrate. The offset white color described as T-MOULDING, OFFSET WHITE provides a neutral, clean edge tone that matches installations calling for this specific white. The product class as tee moldings means it locks into a groove rather than relying on surface-only treatments, which matters where edges take regular contact.
This tee molding uses a 7/64 inch kerf, so groove cuts target that dimension when setting up saw blades or router bits for the stem. Because the material is described as consistently precise in dimensions and workability, installers can keep a standard setup across multiple panels on the same project, which streamlines cutting and reduces trial adjustments. The firm, edge-hugging design works with the groove to hold the molding in place, so correct kerf and depth create a reliable mechanical lock along the edge length. The 1-1/4 inch width gives a clear reference for how far the molding covers from the groove center, helping plan layout on thicker or layered edges where coverage and reveal need to align with adjacent surfaces.
This Patwin Plastics, Inc. tee molding is categorized under Edgebanding & Surfacing as a tee molding, so it fits projects where an embedded stem is preferred over surface edgebanding for retention. The SAP description T-MOULDING, OFFSET WHITE defines its role as an offset white edge solution, useful where a specific white tone is part of the design scheme. Because the design fits any contour whether outside or inside curves and radii, it supports work on curved counters, cabinet ends, or other shaped panels where straight-only edgebanding would fall short. The 250 foot roll format supports production or multi-unit jobs, giving the installer enough continuous length to run around several panels or long perimeters while maintaining color and profile consistency from piece to piece.
The non-toxic polyethylene "Flexene" material is manufactured to be consistently precise in dimensions, workability and color, which supports clean groove engagement and uniform bend behavior from one length of molding to the next. That consistency pairs with the 7/64 inch kerf requirement, so once tooling is dialed in for the stem, further cuts follow the same pattern without repeated adjustments. The design insures the installation will fit firmly and hug edges permanently, so the stem and barb interaction with the groove work as a system to hold the edge over time under normal use conditions. Because the molding flexes to fit any contour whether outside or inside curves and radii, installers can edge both straight carcass components and matching curved pieces using the same product, keeping workflow simple while maintaining a continuous, offset white edge line throughout the project.
The Patwin 601 white tee molding uses non-toxic polyethylene in the Flexene formulation, which provides a workable plastic edge that handles normal cutting, bending, and insertion into grooves.
The Patwin P520-1-1/4-601 tee molding is 1-1/4 inches wide, giving coverage across typical panel edges where a broader cap is required for both protection and a finished appearance.
This tee molding is designed for a 7/64 inch kerf, so the groove width matches the stem size, allowing the barbs to grip and hold the molding firmly along the edge.
The Patwin Flexene tee molding fits any contour whether outside or inside curves and radii, so it follows curved edges where the groove matches the required kerf.
The tee molding design insures the installation will fit firmly and hug edges permanently, so once seated in the properly sized groove it resists loosening during normal use.
The T-MOULDING, OFFSET WHITE suits edgebanding and surfacing projects needing an offset white edge, particularly where 1-1/4 inch width and a groove-anchored tee profile are part of the design.
The Patwin Plastics 601 white tee molding with 1-1/4 inch width, 7/64 inch kerf design, and non-toxic polyethylene Flexene construction is built for groove-based edge treatment where a firm, edge-hugging installation is required. Its ability to fit any contour whether outside or inside curves and radii means one molding can carry a consistent offset white edge across straight runs and shaped pieces. For projects within edgebanding and surfacing work that match this profile, selecting this P520-1-1/4-601 tee molding aligns the groove, width, and color requirements into a single, repeatable solution.
Sold In: 250 Lineal Ft