Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quickscrews #6 x 1-1/4" Face Frame and Pocket-Hole Screw is a fine-thread fastener built for hardwood face frame joinery and pocket-hole assembly in 3/4-inch stock. The modified pan head, double auger point, and #2 square drive combine to pull joints tight cleanly and hold position under production driving loads.
Face frame assembly in 3/4-inch stock has a narrow window for screw length. Too short and the thread engagement is shallow; too long and the point risks breaking through the back of the stile or rail. At 1-1/4", this screw lands squarely in the standard range for pocket-hole joinery in that stock thickness, giving full thread bite while staying well clear of the opposite face. Cabinet shops running hardwood frames in maple, oak, or cherry will find this length paired with a fine thread does the work without over-penetrating or splitting the joint.
Fine thread is the correct choice for hardwood face frames. Coarse thread in dense species like maple tends to strip rather than grip, especially at production driving speeds. The fine thread on this screw bites steadily and holds without the head pulling through. The modified pan head has a flat bearing surface that clamps the joint evenly rather than wedging down into the wood, which is important in narrow face frame stock where a countersinking head can crack the stile. The double auger point carries two chip-clearing flutes at the tip, which helps reduce the radial pressure that causes splitting at the start of the hole, a real advantage when driving close to the end of a rail or near the edge of a stile.
This is a production-volume screw for cabinet shops building face frames in hardwood. The fine thread and modified pan head suit rail-to-stile pocket-hole joinery as well as attaching finished face frames to the cabinet box. The square drive and 8,000-count box make it practical for shops running steady output, where stopping to reload or switch bits costs time. It also suits smaller operations and finish carpenters who work primarily in hardwood and want a screw that handles oak or maple frames without the splitting risk that comes with a coarser thread or a more aggressive point.
Fine thread is designed for hardwood face frames. In dense species like maple or oak, a coarse thread creates less surface contact and can strip under torque. The fine thread on this screw engages more material per inch of shank and holds the joint firmly without the head pulling through.
The double auger point has two opposing chip-clearing flutes at the tip, compared to the single flute on a standard Type 17 point. The second flute increases chip removal and reduces radial pressure as the screw enters the wood, which lowers the chance of splitting near the end of a rail or at the edge of a narrow stile.
Yes. The modified pan head, fine thread, and 1-1/4" length suit both pocket-hole rail-to-stile joinery and face frame attachment to the cabinet box in 3/4-inch hardwood stock.
The square recess is designed to hold the screw on a correctly sized bit for one-handed placement, which helps when reaching into cabinet openings at awkward angles. The fit depends on using a properly sized #2 square bit.
Fine thread is optimized for hardwood. For softwood, MDF, melamine, or plywood face frames, a coarse-thread pocket-hole screw will typically provide better pull-out resistance in those lower-density materials.
When the job is building or hanging hardwood face frames in 3/4-inch stock, this 1-1/4" fine-thread pocket-hole screw gives you the right length, the right thread, and a square drive that keeps pace with production output without splitting the frame.
Sold In: 8000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WL3D61250P Mfr# 5706 | Quickscrews #6 x 1-1/4" Modified Pan Head Face Frame and Pocket-Hole Screw Square Drive - Double Auger Point Fine Thread Plain, 5706 - 1000/Box | ||||
Sold in: 7000 Each |  WL3D61500B Mfr# 5215 | Quickscrews #6 x 1-1/2" Modified Pan Head Face Frame and Pocket-Hole Screw Square Drive - Double Auger Point Hi-Lo Plain, 5215 - 7000/Box | ||||
Sold in: 1000 Each |  WL3D61500P Mfr# 5707 | Quickscrews #6 x 1-1/2" Modified Pan Head Face Frame and Pocket-Hole Screw Square Drive - Double Auger Point Hi-Lo Plain, 5707 - 1000/Box |