SLUN Vertical Swing Lift-Up Mechanism For Cabinet Doors

SLUN vertical swing lift-up mechanism from Sugatsune America uses a unique swing mechanism to lift cabinet doors up vertically and hold them in place, which keeps the door out of the work area while you access the cabinet. This gray unit is designed as a lift assist mechanism within the lid supports and stays product class, so it supports smooth, controlled motion instead of a loose, free-swinging door. The sleek and compact design maximizes storage access by keeping hardware bulk to a minimum, which is useful in tight upper cabinets or workstations. Recommended door dimensions of 24 to 35-1/2 inches wide and 15 to 18 inches tall focus the mechanism on common cabinet sizes, helping installers match projects to a known working range. Three different versions are designed to accommodate different door weights, so the correct version can be selected for a predictable lift and hold feel.

Key Swing-Up Mechanism Details For Cabinet Projects

• The unique swing mechanism lifts cabinet doors up vertically and holds them in place, keeping the door above the opening for clear access to tools, contents, or equipment during use.
• Recommended door sizing of 24 to 35-1/2 inches wide and 15 to 18 inches tall directs this mechanism to a defined cabinet range, supporting repeatable layouts on upper cabinets and similar installations.
• Three different versions are designed to accommodate different door weights, allowing projects to match door construction and hardware for consistent motion across a run of cabinets.
• Testing to perform over 30,000 cycles indicates the mechanism is built for repeated daily operation, which matters in busy shops, kitchens, or workstations where doors are opened many times.
• The unit housing color is gray, so the mechanism blends with many modern cabinet interiors and does not visually dominate the opening when doors are raised.

Swing Lift-Up Installation Dimensions And Fit Focus

This swing-up mechanism is recommended for cabinet doors 24 to 35-1/2 inches wide and 15 to 18 inches tall, so planning the cabinet face within this window helps the mechanism operate as intended across its motion range. The design is meant to be used in pairs, which means one mechanism on each side of the door to balance forces and support the vertical swing. The product is part of the lift systems, lid supports, and stays category, so it functions as a supporting component in the overall cabinet hardware layout rather than as a hinge by itself. The mechanism is tested to perform over 30,000 cycles, giving installers a defined performance reference when choosing hardware for higher-use environments such as commercial casework or frequently used residential cabinets.

Using The SLUN-3N Swing-Up Mechanism In Real Jobs

Where The SLUN Vertical Swing Lift-Up Mechanism Works Best

The SLUN vertical swing lift-up mechanism is positioned for cabinet doors that need to lift up vertically and stay in position, such as overhead storage, upper cabinet runs, or work surface cabinets that benefit from an unobstructed opening. As part of the work surface and tables lift assist mechanisms category, it supports doors that act like lids or upward-swinging fronts rather than side-hinged faces. Recommended door dimensions of 24 to 35-1/2 inches wide and 15 to 18 inches tall align with many standard cabinet modules, which is useful in modular layouts or series work. The design is intended for use in pairs, so each door benefits from symmetric support that helps manage door width and weight within the stated range. Unit housing color in gray allows the mechanism to sit inside a variety of casework styles without drawing attention when the door is raised.

Why SLUN-3N Design Details Support Consistent Results

The Sugatsune America SLUN-3N swing-up mechanism uses a unique swing mechanism that both lifts and holds the door, so once the door is raised it stays in position without drifting into the user space, which supports repeatable access to cabinet contents. Testing to perform over 30,000 cycles provides a quantified performance benchmark, which matters on projects where door hardware must tolerate repeated openings across years of service. Three different versions are designed to accommodate different door weights, giving project planners a way to align door construction - such as heavier fronts or lighter frames - with an appropriate mechanism version. The product sits within the lid supports and stays class, so it contributes controlled motion and holding function as part of a cabinet hardware system. Recommended sizing of 24 to 35-1/2 inches wide and 15 to 18 inches tall helps reduce trial-and-error on door proportions, because the mechanism parameters are already defined for that envelope.

Common Questions About The SLUN-3N Swing Lift Mechanism

Select The SLUN-3N For Vertical Swing Cabinet Doors

The Sugatsune America SLUN vertical swing lift-up mechanism gives cabinet doors a vertical lift motion that holds them in place, which suits upper cabinets and work surface storage where a clear opening helps productivity. Recommended door dimensions of 24 to 35-1/2 inches wide and 15 to 18 inches tall keep this hardware focused on common casework sizes. Being designed for use in pairs and tested to perform over 30,000 cycles, it aligns with projects that demand both controlled motion and repeated daily operation. For door weights matched to one of the three available versions, the SLUN-3N swing-up mechanism offers a defined hardware option within the lift assist mechanisms category.