Colonial Bronze 751 3" (76 mm) Center to Center Satin Chrome Pull, 750-3-26

Colonial Bronze 751 Series 3 Inch Satin Pull

Colonial Bronze 751 Series 3 inch pull provides a 3 inch center to center grip point, giving cabinets and drawers a consistent hand placement that suits both new installs and replacements in standard drill patterns. The center to center dimension matches common 76 mm layouts, which keeps layout work straightforward on face frames and slab fronts. The pull is made from solid brass, so the body has a substantial feel that suits everyday cabinet use in busy spaces. A satin chrome finish on the solid brass creates a subdued metallic look that helps mark fingerprints less than bright mirror finishes in typical handling. The projection is 1-3/16 inch from the mounting surface, leaving usable finger clearance for a confident pull without needing deep edge profiles. A 5/16 inch length or diameter build provides a comfortable grip profile without feeling bulky on smaller cabinet fronts.

Key Satin Chrome Pull Details For Daily Use

• The pull uses a 3 inch center to center spacing, which aligns with many cabinet boring jigs and speeds repeat drilling on runs of doors and drawers.
• Solid brass material forms the core of the pull, so the handle maintains a sturdy feel under repeated opening and closing of doors and drawer fronts.
• The satin chrome finish on the solid brass creates a softened metallic surface that visually pairs with other satin chrome hardware in the same room.
• A 1-3/16 inch projection from the mounting surface offers enough stand-off for fingers to hook behind the pull, which supports comfortable use on thicker door profiles.
• The 5/16 inch length or diameter dimension shapes a slim pull profile that suits smaller cabinet faces while still giving adequate contact area for the hand.
• Threaded holes accept 8-32 x 1 inch screws, so the pull ties readily into standard cabinet fastening practices on many common door and drawer thicknesses.

Mounting And Fit Details For This 3 Inch Pull

This Colonial Bronze Company pull is defined by its 3 inch center to center spacing, which fits many existing cabinet layouts that already use 3 inch boring. The mounting relies on 8-32 x 1 inch screws, matching a common machine screw size used in cabinet hardware installs. That thread specification lets the pull seat securely against door or drawer faces when tightened, even in frequent-use locations. The 1-3/16 inch projection plays directly into fit decisions for overlay doors, because it creates space between the hand and the cabinet face. With a 5/16 inch length or diameter, the handle profile stays narrow enough for tight drawer groupings, reducing the chance of handles visually crowding each other on small fronts.

Using This Satin Chrome Pull In Real Projects

Where This 3 Inch Satin Chrome Pull Works

This Colonial Bronze cabinet pull, cataloged as Manufacturer Part 750-3-26, fits into decorative hardware and moldings projects where a defined 3 inch center to center spacing is already planned. That spacing suits retrofit jobs that swap older pulls on doors or drawers drilled at 3 inches, so installers can reuse existing holes. The satin chrome finish sits comfortably within projects calling for coordinated satin chrome decorative hardware, keeping handles visually consistent across a run of cabinets. Because the pull body is solid brass, it serves well in cabinet banks that see steady use, such as kitchen bases and upper cabinets. The 5/16 inch length or diameter form keeps the handle from dominating narrow drawer fronts, which is useful in smaller vanity or utility cabinets.

Why The Dimensions Support Consistent Cabinet Results

The 3 inch center to center layout on this pull simplifies jig setup, allowing a single boring pattern to carry through doors and drawers without layout changes between pieces. Using the 8-32 x 1 inch screw interface gives a predictable thread engagement into the pull body, which supports uniform tightening torque across an installation. The 1-3/16 inch projection controls how far the pull stands away from the face, helping maintain even reveal lines when viewed along a bank of fronts. With a 5/16 inch length or diameter, the handle keeps a balanced proportion against common stile widths, so the hardware does not overpower trim details. The satin chrome finish on solid brass contributes to a consistent surface character, which supports a unified appearance when multiple pulls are lined up across cabinetry.

Common Questions About This Colonial Bronze Pull

Select This 3 Inch Pull For Matching Installs

The Colonial Bronze 751 Series 3 inch center to center satin chrome pull brings solid brass construction, a 1-3/16 inch projection, and a 5/16 inch profile together for practical cabinet work. The 8-32 x 1 inch screw interface and 3 inch spacing align with many existing cabinet layouts, easing layout and installation on doors and drawers. Choose this 750-3-26 pull when a satin chrome finish and consistent 3 inch center to center runs are central to the hardware plan.