Colonial Bronze Wire Pull 4" (102 mm) Center to Center, Oil Rubbed Bronze, 750-4-10B

Colonial Bronze 753 Wire Pull For Cabinets

Colonial Bronze 753-10B solid brass wire pull gives you a 4 inch center to center handle that lines up with standard cabinet drilling, so existing 4 inch layouts stay usable on replacements and new cabinet runs.

The solid brass material creates a rigid pull bar, which supports consistent feel when doors and drawers are opened many times during daily use in kitchens, baths, or shop cabinets.

The oil rubbed bronze finish on this pull establishes a dark, traditional look, which helps hardware blend with warm-toned cabinet finishes while still reading clearly to the hand during use.

The 5/16 inch length or diameter of the wire section provides a comfortable grip surface, which keeps fingers from feeling sharp edges while pulling heavier drawers or wider doors.

The 1-3/16 inch projection moves the hand away from the cabinet face, which allows space for fingers behind the pull when operating thicker doors or drawer fronts.

The handle fits within the Decorative Hardware & Moldings, Handles and Pulls category, which keeps it consistent with other cabinet pulls specified for coordinated projects.

Key Pull Details That Support Daily Use

• The 4 inch center to center measurement aligns the mounting holes, which simplifies layout on new cabinet faces and helps match many existing 4 inch handle locations on refacing jobs.
• The oil rubbed bronze finish defines the surface color, which matters when coordinating pulls with hinges, knobs, and other bronze-finished hardware across a room.
• The 5/16 inch diameter wire form sets the thickness of the pull, which influences how the hand seats on the bar and how substantial the pull feels during operation.
• The 1-3/16 inch projection establishes stand-off from the door or drawer, which helps prevent knuckles from contacting the cabinet surface as fronts are opened.
• The solid brass material construction supplies a single-metal body, which supports a consistent feel across multiple cabinets in the same installation where uniformity is important.

Cabinet Pull Fit, Size, And Mounting Details

This Colonial Bronze cabinet pull uses a 4 inch center to center hole spacing, which lets installers mark and drill straight-line holes across multiple doors or drawer fronts using common cabinet layout tools.

The 5/16 inch diameter of the pull bar defines the size of the hand contact point, which provides a predictable grip when specifying handles across base cabinets, wall cabinets, and tall pantry units.

A projection of 1-3/16 inch sets the working clearance between the pull and the cabinet face, which is useful when planning around door edge profiles or applied moldings that sit proud of the main panel.

The 8-32 x 1 inch screw size associated with this pull establishes the thread and nominal length used for fastening, which helps match to standard cabinet door and drawer front thicknesses during installation.

Using This 4 Inch Oil Rubbed Bronze Pull

Where This Solid Brass Wire Pull Fits

This 753 Series solid brass cabinet pull sits in the Handles and Pulls class, which makes it suitable anywhere a graspable handle is specified on cabinet doors or drawers within woodworking projects.

The oil rubbed bronze finish on the 750-4-10B pull creates a deep, traditional tone, which pairs well with stained woods and other bronze-finished hardware in kitchens, vanities, and built-in casework.

The 4 inch center to center dimension keeps the pull in a common size range, which helps align this model with many cabinet layouts that were originally drilled for 4 inch handles.

The 5/16 inch diameter wire style forms a clean, rounded profile, which works visually with both simple flat-panel doors and more detailed raised-panel fronts on residential or commercial cabinetry.

The 1-3/16 inch projection maintains consistent clearance off the face of the door or drawer, which is useful when pulls are installed near adjacent walls or appliances where space can be tight.

Why These Pull Details Reduce Rework

The defined 4 inch center to center spacing on this Colonial Bronze cabinet handle 750-4-10B limits layout variation, which reduces measuring errors when multiple installers are drilling doors and drawers on larger jobs.

The combination of solid brass construction and 5/16 inch diameter wire section stabilizes the pull body, which helps handles stay aligned on the cabinet face after repeated opening and closing cycles.

The 1-3/16 inch projection is set to a known dimension, which aids in planning overlay door reveals so the pull stands off enough for fingers without conflicting with adjacent cabinet components.

The oil rubbed bronze finish on this solid brass wire pull 4 inch center to center keeps color uniform from piece to piece, which supports consistent appearance when dozens of pulls are specified on a project.

The 8-32 x 1 inch screw size gives a standard thread reference, which simplifies matching drill bit pilots and threads when coordinating with other hardware that uses the same screw standard.

The placement of this pull within Decorative Hardware & Moldings, Handles and Pulls means it follows typical cabinet handle dimensions, which assists designers and installers who are standardizing hardware across multiple cabinet lines.

Common Questions About This 753 Series Pull

Select This Pull For 4 Inch Bronze Runs

The Colonial Bronze 753-10B solid brass wire pull 4 inch center to center offers a known drilling size, a 5/16 inch diameter grip, and a 1-3/16 inch projection in an oil rubbed bronze finish, which supports consistent cabinet hardware layouts.

For projects that specify Handles and Pulls in similar dimensions, this 750-4-10B model from Wurth Baer Supply aligns hole spacing, finish, and material in a single cabinet pull choice.