2-3/8" Diameter x 27-3/4" High Zoom Table Leg, Chrome

Zoom Table Leg Chrome For Heavy Work Surfaces

Zoom table leg chrome gives you a steel table support with a rated load bearing capacity of 660 lb per leg, so each leg can handle substantial static loads in work surface or table applications. The leg diameter is 2-3/8 inches, which provides a broad steel footprint that helps distribute weight and stabilize the top. The leg height is 27-3/4 inches, which puts the work surface at standard table height when paired with typical tops, helping align this leg with other table-height components on the job. The leg is part of Peter Meier's Zoom Series, so it belongs to a coordinated line of steel table legs, which simplifies matching across a workspace. The finish is chrome, giving you a bright, reflective surface that pairs with other chrome components in commercial, shop, or residential projects.

Key Zoom Table Leg Details For Projects

• The steel construction with a 660 lb per leg load bearing capacity supports demanding work surfaces, allowing installers to use this leg for heavy tables where strength is critical.
• The 2-3/8 inch diameter creates a sturdy column profile, which helps limit flex and movement under load across common table and workbench spans.
• The 27-3/4 inch length is designed for table height applications, so builders can standardize on this leg when they need sitting-height work surfaces.
• The leg has built in 4 inch adjustable feet, which provide vertical adjustment to fine-tune height and compensate for floors that are not perfectly level.
• The chrome finish matches other chrome hardware and fittings, supporting a consistent visual specification across projects using metal components.

Installation Details For This Steel Table Leg

This Zoom Series table leg uses a separate bracket to attach the leg to the table, giving installers a defined interface between leg and top. The bracket connection helps position the 2-3/8 inch diameter leg accurately at corners or support points, which supports repeatable layouts across multiple tables. All necessary screws are identified for securing the bracket and leg together, so the mounting method is clearly defined during layout and fastening. The built in 4 inch adjustable feet provide vertical travel at the floor contact point, allowing the 27-3/4 inch nominal leg height to be adjusted within a usable range. This adjustment supports on-site alignment of multiple tables when floors vary from level.

Using Chrome Zoom Legs In Table Builds

Where This 27-3/4 Inch Zoom Leg Fits

This 27-3/4 inch Zoom Series steel leg is intended for table height installations, placing tops at a seated work level when combined with typical surface thicknesses. The 2-3/8 inch diameter works well at corners or intermediate positions under work surfaces, giving a substantial support at each location. With a 660 lb per leg load bearing capacity, the leg suits heavy-duty tables, workstations, or shop surfaces that must carry equipment or dense materials. The chrome finish coordinates with other chrome table components, so it suits environments where exposed metal legs are part of the design. As a member of Peter Meier's Zoom Series, this leg aligns with other Zoom legs of different heights, which simplifies building mixed-height zones in the same project while keeping a consistent style and interface.

Why Zoom Series Details Support Repeatable Results

The separate mounting bracket supplies a fixed interface location for the leg, helping installers repeat hole patterns and leg placement from table to table. That consistent bracket interface works together with the 2-3/8 inch diameter leg to create predictable edge clearances and overhangs in shop drawings. The load bearing capacity of 660 lb per leg lets designers calculate total table capacity by multiplying the rating across the number of legs, which simplifies structural planning. Built in 4 inch adjustable feet allow installers to dial in final height and plumb, so rows of tables can align even when floors vary. The table height length of 27-3/4 inches helps standardize seating ergonomics across multiple work areas using this same Camar 666-7S-C1 leg.

Common Questions About This Zoom Table Leg

Selecting This Chrome Zoom Leg For Your Build

This 2-3/8 inch diameter, 27-3/4 inch high Zoom Series steel table leg with chrome finish, 660 lb per leg load bearing capacity, separate mounting bracket, and built in 4 inch adjustable feet offers a defined, repeatable solution for table height work surfaces.