2-3/8" Diameter x 34-1/4" High Zoom Table Leg, Glossy Black

Zoom Series Steel Table Leg For Heavy Worktops

Zoom Series steel table leg from Peter Meier gives a 34-1/4 inch counter height solution for work surfaces that need strong support. The 2-3/8 inch diameter steel construction provides a solid base, so counters and tables feel stable under load during everyday use. A rated load bearing capacity of 660 lb per leg supports heavy tops or equipment, which matters when building workstations, shop tables, or counter-height benches that see real weight. The glossy black finish presents a clean, uniform look that suits modern commercial and residential projects. As part of the Zoom Series premium line, this leg is designed as a purpose-built work surface component rather than light furniture trim, which helps it perform in demanding shop or kitchen environments where rigidity and appearance both matter.

Key Zoom Series Features That Support Your Build

• The 2-3/8 inch diameter leg gives a broad, steel support column, helping resist wobble under side loads on counters and tables.
• The 34-1/4 inch height targets counter height installations, so work surfaces align with typical counter runs and adjacent cabinetry.
• A 660 lb per leg load rating allows use under heavy tops or equipment, supporting commercial workstations and dense materials.
• The glossy black finish matches the Gloss Black option in the Zoom Series, helping keep color consistent across multiple legs.
• Four available finishes in the series allow this glossy black leg to coordinate with Flat Black, Chrome, or Brushed Steel legs on the same project.
• Membership in Peter Meier's Zoom Series indicates a premium steel leg line, which suits applications where appearance and structural performance both matter.

Mounting Height And Adjustable Foot Details

This Zoom Series steel table leg uses a 34-1/4 inch length to establish counter height work surfaces, which helps align tops with standard counter runs. Legs have built in 4 inch adjustable feet, so the installed height can be fine-tuned on uneven floors or where tops need precise alignment with adjacent cabinets or fixtures. The legs have separate brackets to attach the leg to the table, creating a defined mounting interface between the round steel leg and the underside of the work surface. That bracketed connection supports straightforward positioning during layout and installation, especially when setting multiple legs on long counters or larger work tables.

How This Gloss Black Table Leg Works In Practice

Where This Counter Height Leg Is Typically Used

This 34-1/4 inch counter height table leg is suited to work surfaces and tables where a steel support is preferred over casework, such as free-standing counters, utility tables, or shop benches. With a 2-3/8 inch diameter, the leg presents a substantial profile that visually supports thicker tops and long spans, which matters in open-plan layouts where legs remain visible. The glossy black finish supports use in modern kitchens, commercial counters, or office environments that use dark hardware and fixtures. As part of the Zoom Series, this leg can pair with other legs in the line at different heights, allowing consistent appearance across table-height and counter-height surfaces in the same project.

Details That Help Alignment, Leveling, And Workflow

The leg's 660 lb load bearing capacity per leg supports layouts that carry heavy counters, tools, or equipment without overloading the support, which helps avoid rework around deflection or sag. Built in 4 inch adjustable feet allow on-site leveling of each leg, which is valuable when installing over uneven slabs or older floors where precise height must be tuned after the top is in place. The separate bracket used to attach the leg to the table defines clear mounting points on the underside, simplifying repeatable spacing when laying out multiple legs along a run. An optional caster with built in brake, at 2-1/2 inches tall, is available to make furniture and tables mobile, so the same leg interface can support both fixed and movable workstations. Products in the Zoom Series are sold in single-leg and four-leg configurations, which supports both small one-off tables and multi-leg counter builds that repeat the same hardware across a larger installation.

Common Questions About This Zoom Series Leg

Selecting This Gloss Black Leg For Your Project

Choose this Zoom Series steel table leg when a 34-1/4 inch counter height support, 2-3/8 inch diameter steel column, and 660 lb per leg capacity match your work surface design. The glossy black finish, built in 4 inch adjustable feet, and separate mounting bracket help align counters and tables to surrounding casework while supporting significant loads. For projects that benefit from mobility, the optional 2-1/2 inch tall caster with built in brake extends the same leg platform into rolling workstations, creating a consistent solution across fixed and mobile surfaces.