Bosch Jigsaw Blades HSS For Metal Cutting

Bosch jigsaw blades HSS are high speed steel T-shank blades designed for smooth, straight-line cutting in metals, so metalworkers can make controlled cuts in thin materials. Each blade has 24 teeth per inch, which supports fine, clean cutting in sheet metal and thin metals where a coarse tooth would grab. The blades are described as Basic for Metal, indicating they are aimed at everyday cutting of metal stock rather than specialty tasks, helping shops cover routine metal work. Their longer 5-1/4 inch length is specified for cutting thin metals, giving extra reach for profiles and small tube while still maintaining stability in the cut. The set is sold as a jigsaw blade 100 pack, which suits repeat use in production or frequent repair work where the same blade type is used often.

Key Bosch T318A100 Blade Details In Use

• The manufacturer part number T318A100 identifies this specific Basic for Metal blade, helping match replacements to existing setups when the same cut quality is required.
• The T-shank design is stated to provide maximum grip and stability, which supports steady blade tracking in the saw and reduces wandering during straight-line metal cuts.
• The blades are stated to fit 90% of all current jigsaw makes and models, so installers using common professional saws can apply the same blade across multiple tools on the job.
• The description notes that T-shank blades are suitable for jig saws from Bosch, Dewalt, Hitachi, Makita, and Milwaukee, which lets multi-brand shops keep a single blade type in inventory for many saws.
• These blades are described as the economical choice for cutting sheet metal and thin metals, helping keep per-cut blade costs down on repetitive cutting tasks and shop production runs.

Installation And Cutting Performance Details

The T-shank jigsaw blades Bosch design is made to lock into modern jigsaws with a positive grip, so tradespeople can seat the blade quickly before cutting metal stock. Their 5-1/4 inch length supports working on pipes, profiles, and sheet metal within the stated thickness range without needing extremely short strokes, which can speed straight cuts. With 24 TPI and a wavy set and milled tooth design, the blade supports controlled cutting in thin metals, helping reduce snagging in 10-16 gauge sheet metal and thin metals from 1/16 inch to 1/8 inch. The blades are intended for smooth, straight-line cuts, so they suit layout-driven work like trimming tube stock and angle iron to dimension. Because the blades are high speed steel, they are built for metal cutting tasks on ferrous and non-ferrous thin materials described in the application.

Using These Metal Jigsaw Blades On The Job

Where These Jigsaw Blades Work Best

These basic for metal jigsaw blades are listed for sheet metal and thin metals that are ferrous and non-ferrous, so they support a range of common shop metals. The application notes use on sheet metal between 10 and 16 gauge, which aligns these blades with HVAC panels, light enclosures, and similar thin sheet work. Thin metals from 1/16 inch to 1/8 inch are also specified, giving a clear window where the 24 TPI tooth pattern is suited to maintain clean edges. The blades are noted for pipes with less than 2-1/2 inch diameter, so they can cut small conduit, tube, and similar round stock that falls within that size. Tube stock and angle iron are specifically mentioned, tying this blade to common fabrication and repair cuts where controlled straight cuts matter. The jigsaw blades are also described as longer blades for cutting thin metals, so they favor work where additional stroke length helps complete the cut in one pass.

Details That Support Repeatable Straight Cuts

Each blade uses a T-shank design for maximum grip and stability, which helps maintain a consistent line through the cut and supports repeatable results in production-type work. The 24 teeth per inch tooth count and wavy set and milled design support smoother engagement in thin materials, limiting grab in 10-16 gauge sheet and reducing roughness on the cut edge. Their Basic for Metal designation and economical positioning aid shops that need reliable, everyday blades for routine metal work without rotating through multiple specialized profiles. The blades are specified to fit 90% of current jigsaw makes and models, which means similar cutting feel can be maintained across many saws in one facility. Stated suitability for jigsaws from Bosch, Dewalt, Hitachi, Makita, and Milwaukee further supports consistent performance where crews run mixed fleets. Their longer length for cutting thin metals gives room to work across profiles, tube stock, and small diameter pipes, which supports repeat set-ups and standard cut layouts with one blade type.

Common Questions About Bosch Metal Jigsaw Blades

Select The Right Bosch Blades For Metal Work

The jigsaw blade 100 pack Bosch T318A100 offers high speed steel T-shank blades built for thin ferrous and non-ferrous metals within the stated ranges, so one blade style can handle much of a shop's routine metal cutting. With a 5-1/4 inch longer blade length and 24 TPI wavy set and milled teeth, these Basic for Metal blades support smooth, straight-line cuts in sheet metal, tube stock, pipes below 2-1/2 inch diameter, and angle iron. For teams running multiple jigsaw brands, the wide stated fit across 90% of makes and suitability for Bosch, Dewalt, Hitachi, Makita, and Milwaukee helps standardize on a single metal-cutting blade profile across tools.