Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Cup Pulls Series 3 in cup pull is a zinc die-cast handle from the Cup Pulls collection that provides a traditional cup profile for cabinet and furniture fronts, giving a familiar hand-feel where a recessed grip is preferred. The 3 in (76 mm) center-to-center drilling concentrates the load at a common cabinet hole spacing, helping align this pull with layouts designed around that measurement. Its 3-7/16 in overall length covers the span just beyond the mounting points, which helps visually balance standard drawer front proportions. The 1-5/8 in width defines the vertical footprint on the face, guiding layout when stacking multiple pulls across a bank of drawers. A 1 in projection sets how far the pull stands off the surface, shaping the clearance space behind the cup for fingers and affecting how far the hardware extends into a tight walkway or narrow corridor run.
This Amerock BP53010BN cup pull uses a 3 in (76 mm) center-to-center layout, so the mounting screw holes are spaced around that common cabinet standard, supporting layouts that rely on consistent horizontal alignment. Its 3-7/16 in overall length extends slightly beyond the drilled centers, which helps visually anchor the pull on medium-width drawers without overwhelming smaller fronts. The 1-5/8 in width sets the vertical coverage on the face, guiding how high above and below the screw line the hardware will sit on rail-and-stile or slab fronts. With a 1 in projection off the surface, the pull creates a defined gripping pocket under the cup, affecting how easily fingers can reach in from above or below when opening heavier fronts.
The Cup Pulls collection description identifies this piece as combining traditional style with versatility, so its cup profile and finish are suited to cabinets or furniture needing a classic handle shape that can align with different decorative lines from the same family. Its place in Decorative Hardware & Moldings under Handles and Pulls, Amerock positions it as a primary operating pull on cabinet doors and drawers rather than a decorative-only trim, supporting use on working kitchen, bath, or storage fronts. The 3 in center-to-center drilling ties directly into a widely used hole spacing, which matters when matching existing layouts in remodel work set up for that dimension. The black nickel finish provides a dark metallic look that can coordinate with other black nickel or nearby darker finishes, helping tie together hinge, knob, and pull selections within the same room.
The specified 3 in (76 mm) center-to-center dimension allows installers to rely on a fixed drilling pattern, which streamlines jig setup and speeds boring multiple fronts with the same spacing. The 3-7/16 in length and 1-5/8 in width give clear edge-to-edge measurements, which support precise layout from drawer edges or stile borders when maintaining consistent reveals. A 1 in projection defines the working depth of the cup, shaping the space where fingers catch the pull and influencing how comfortably users can open larger, loaded drawers. The zinc die-cast construction provides a uniform metal casting, which supports repeatable sizing across multiples and helps groups of pulls line up cleanly on long cabinet banks. The Amerock Corporation branding and BP53010BN part number identify the exact model, which matters when repeating a hardware schedule or matching earlier installations that specified this same pull.
This Amerock BP53010BN cup pull has a 3 in (76 mm) center-to-center measurement, which suits layouts and drilling jigs set up around that common cabinet hole spacing.
The pull length is 3-7/16 in, so it extends slightly beyond the 3 in mounting centers, helping visually anchor the hardware on standard drawer and cabinet fronts.
This black nickel cabinet cup pull projects 1 in from the cabinet face, creating a defined gripping pocket under the cup for everyday opening and closing.
The Amerock BP53010BN cup pull is zinc die-cast, giving it a solid metal body with consistent dimensions across multiples on the same project.
This Amerock zinc die cast cup pull has a black nickel finish, providing a dark metallic look that can coordinate with other black nickel hardware in a space.
The pull width is 1-5/8 in, which defines the vertical footprint on the cabinet face and helps plan spacing between hardware and adjacent design elements.
This Amerock 3 in center to center cup pull combines a zinc die-cast body, black nickel finish, and 3-7/16 in by 1-5/8 in footprint to support consistent cabinet layouts. Pair its fixed 3 in drilling and 1 in projection with your planned cabinet fronts to keep hole spacing, reveals, and grip depth aligned across every drawer and door run.
Sold In: 1 Each
