
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Extensity 160mm center to center pull is a zinc die-cast cabinet handle in an antique silver finish, so it offers a defined grip point with a classic metallic look for doors and drawers. The 6-5/16 in center-to-center drilling aligns to a common hole spacing, which simplifies layout when planning new fronts or lining up with existing boring patterns. The pull measures 7-1/2 in overall length, giving extra hand clearance across wider drawer faces while keeping proportions balanced on standard cabinet doors. A 1-1/2 in projection sets the handle off the surface enough for a full finger wrap, which helps when opening heavier drawers. The 11/16 in width provides a comfortable touch surface without crowding tight face-frame margins. The Amerock BP29394AS part number ties this handle directly to the Extensity collection, which helps match pieces across a job when coordinating multiple openings.
The Extensity pull is drilled at 6-5/16 in center-to-center, so the mounting holes line up on a 160 mm spread for cabinet doors and drawers. With a 7-1/2 in overall length, the bar extends past the hole centers, which helps installers center the pull visually on wider faces while still landing screws at the standard spacing. The 1-1/2 in projection offsets the grip from the surface, allowing doors to open cleanly even when fronts overhang frames. At 11/16 in wide, the pull sits comfortably on rails without encroaching on panel reveals. The 8-32 x 1 in screw size matches the threaded inserts in the zinc die-cast body, which connects the handle to typical cabinet hole bores using a familiar fastener thread.
This Amerock Extensity 160mm center to center pull is sized for cabinet doors and drawers that follow a 6-5/16 in drilling pattern, so it suits kitchen, bath, or built-in casework using metric or imperial layout jigs. The 7-1/2 in overall length pairs well with wider drawer fronts, giving enough bar length so hands land near the center rather than at the edges. On standard cabinet doors, the 11/16 in width fits comfortably along stiles without clipping into panel profiles, which supports installations where the hardware must sit close to interior edges. The antique silver finish ties visually into designs that use softer, aged metal tones, matching projects that call for a decorative hardware and moldings solution within the Handles and Pulls class listed for Amerock.
The defined 6-5/16 in center-to-center measurement reduces layout variability, because installers can repeat the same 160 mm drilling jig across multiple fronts and know the Amerock BP29394AS pull will land correctly. The 1-1/2 in projection provides steady clearance between the hand and cabinet face, which cuts down on knuckles contacting doors during repeated opening and closing. With a 7-1/2 in length and 11/16 in width, the pull offers a balanced footprint, spreading the pulling force across more surface area on the zinc die-cast body. That construction gives a consistent feel under hand every time the pull is used on a cabinet or drawer. The antique silver finish, identified specifically for this Extensity model, supports visual continuity when multiple pulls from the same collection are installed across a room or joined workstations.
The Amerock BP29394AS pull has a 6-5/16 in center-to-center spacing, so its screw holes align on a 160 mm spread for cabinet doors and drawers.
The Extensity pull measures 7-1/2 in in overall length, so it extends past the mounting holes to give a longer gripping surface on doors and drawers.
The pull projects 1-1/2 in from the cabinet surface, giving finger clearance that helps when opening heavier drawers or doors with thicker fronts.
The pull is 11/16 in wide, which provides a comfortable touch surface while leaving space on narrow rails or stiles around the mounting area.
The Amerock Extensity BP29394AS pull is zinc die-cast, giving it a solid metal construction that provides a consistent feel in cabinet and drawer use.
This Extensity cabinet pull has an antique silver finish, giving a muted metallic tone suited to traditional or transitional cabinet hardware layouts.
The Amerock Extensity antique silver pull combines a 6-5/16 in center-to-center layout with 7-1/2 in overall length, 1-1/2 in projection, and 11/16 in width, giving defined mounting and a comfortable grip. The zinc die-cast construction and identified Amerock BP29394AS part number connect this handle directly to the Extensity collection for coordinated cabinet work. For projects calling for a decorative Handles and Pulls solution in an antique silver finish, this Extensity pull from Wurth Baer Supply aligns drilled layouts and visual details across doors and drawers.
Sold In: 1 Each