
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Belwith Keeler Touch of Spring pull identifies this handle as part of the Touch of Spring Series, which gives installers a consistent style reference when matching existing hardware across a project. The 3 inch center to center drilling places this pull in a common cabinet and drawer layout range, so it fits many standard boring patterns used in shop jigs. The Windsor Antique finish ties directly to the listed Windsor Antique description, bringing a warm, traditional metal look that supports classic kitchen, bath, or furniture styling. Zinc die cast construction defines the base material, providing a solid metal pull body that handles repeated use on frequently accessed doors and drawers. The stated 5-3/8 inch overall length sets the visual span across the front of a face frame or panel, helping plan proportion against rail heights. The 1 inch projection controls how far the pull stands off the surface, affecting finger clearance and keeping profiles tight in high-traffic runs.
The specified 3 inch center to center spacing gives a fixed drilling dimension, so bores can be laid out once and repeated across door and drawer runs without re-measuring each piece. The listed 8-32 x 1 inch screw size defines the thread and length, aligning the pull with standard cabinet screw tap sizes and typical 3/4 inch material thicknesses. The 1 inch projection and 7/8 inch width together describe the pull envelope off and across the surface, which helps plan around adjacent doors, drawer reveals, and nearby walls. The 5-3/8 inch overall length also assists when replacing existing handles, because it signals how much of any old finish shadow the new pull will cover on the face.
The Belwith Keeler Touch of Spring Series identification ties this pull to a named collection, which helps when matching it to other Belwith Keeler hardware on a kitchen, bath, or furniture run. Its 3 inch center to center drilling falls into a common cabinet hardware standard, so it suits many face-frame and frameless cabinet layouts that already target this spacing. The Windsor Antique finish described in the data supports traditional and transitional styles, making the pull a practical choice for stained wood cabinetry or painted finishes that benefit from a warm metal tone. The defined 5-3/8 inch length lets installers select it confidently for medium-width drawers and doors where a small yet noticeable pull footprint is desired. With a 1 inch projection, the pull sits close enough to panels for a neat appearance while still providing usable finger clearance in typical kitchen and bath traffic paths.
The 3 inch center to center dimension drives jig setup, so once a drilling template is indexed to that spacing, holes can be repeated quickly across a bank of doors and drawers. The stated 8-32 x 1 inch screw size defines both thread engagement and reach through common 3/4 inch fronts, which supports predictable tightening without overextending past the back of the panel. Zinc die cast material gives the pull a uniform casting profile, so each handle in a batch presents the same grip shape and feel during installation and daily use. The 7/8 inch width and 1 inch projection combination keeps the pull compact, which helps maintain even reveals when doors swing near walls, appliances, or adjacent cabinetry. The Windsor Antique finish, matched by the Windsor Antique description, supports consistent color tone from piece to piece, simplifying visual alignment when rows of pulls are viewed together along upper and lower cabinets.
The Belwith Keeler Touch of Spring pull has a 3 inch center to center measurement, which sets the hole spacing for drilling and matching to existing cabinet bores.
The P7303-WA pull is made from zinc die cast, giving a solid metal construction that supports a consistent feel on cabinet doors and drawers.
This Touch of Spring Series pull has a Windsor Antique finish, providing a warm, aged metal look suited to traditional or transitional cabinet styles.
The Belwith Keeler cabinet pull has a 5-3/8 inch overall length, which defines the footprint across door or drawer fronts during layout and replacement work.
This cabinet pull projects 1 inch from the surface and is 7/8 inch wide, which shapes finger clearance and the visual profile on the cabinet front.
The Belwith Keeler pull uses an 8-32 x 1 inch screw size, matching common cabinet hardware threads and typical front thicknesses in many installations.
The defined Belwith Keeler brand and Touch of Spring Series designation position this pull as a coordinated choice when a Windsor Antique finish is already part of the job. The 3 inch center to center drilling, 5-3/8 inch overall length, and 1 inch projection give clear layout and fit information before holes are bored or fronts are ordered. By matching these verified dimensions and the zinc die cast construction to project requirements, installers can align style, scale, and hardware interface efficiently.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BWP7304-VP Mfr# P7304-VP | Hickory Hardware Touch Of Spring 3" (76 mm) Center to Center Blonde Antique Pull, P7304-VP | ||||
Sold in: 1 Each | BWP7303-VP Mfr# P7303-VP | Hickory Hardware Touch Of Spring 3" (76 mm) Center to Center Vibra Pewter Pull, P7303-VP | ||||
Sold in: 1 Each | BWP7302-VP Mfr# P7302-VP | Hickory Hardware Touch Of Spring 3-3/4" (95 mm) Center to Center Blonde Antique Pull, P7302-VP | ||||
Sold in: 1 Each | BWP7301-VP Mfr# P7301-VP | Hickory Hardware Touch of Spring Vibra Pewter 1-1/4" (32 mm) Diameter Knob, P7301-VP |