SurfPrep ProFoam 6 x 10mm Medium sanding disc describes a SurfPrep abrasive disc built on ProFoam with a 6 inch diameter and 10mm thickness, so installers and finishers get a defined, repeatable sanding footprint on their work. The disc uses aluminum oxide abrasive in a 120-150 grit range, which provides a medium cut that removes material while still preparing surfaces for further finishing steps. The disc is described as medium, so it targets situations where an aggressive first pass is not required but a clearly visible sanding action still matters. The product is categorized as an abrasive disc, aligning it with common sanding workflows on woodworking and similar shop tasks. The designation Bulk 100/Each indicates the product is supplied in a bulk quantity, which supports shops or trades that run sanding operations on a regular basis and want consistent discs across a job.
The product description notes a PF DISC 10MM H&L MED 120-150 configuration, which indicates a ProFoam disc with 10mm foam thickness, hook and loop attachment, and a medium 120-150 grit range, so the disc connects into common hook and loop sanding setups. The No Hole note in the product name identifies this disc as a non-hole pattern disc, which affects how it is paired with backing pads and dust removal approaches in the sanding process. The 6 inch diameter and ProFoam construction support a defined sanding area and foam-backed contact during setup, so users can select this disc where a 6 inch ProFoam pad or interface is already part of their sanding station.
The SurfPrep ProFoam 6 inch x 10mm medium 120-150 grit aluminum oxide sanding disc is positioned as an abrasive disc for workflows where a medium step is needed. The medium designation combines with the 120-150 grit range to place this disc in the middle of a typical sanding sequence, so it can be used after coarse shaping steps and before finer surface preparation. The ProFoam reference links the disc to a foam-backed structure at 10mm thickness, giving the abrasive a defined layer between the backing and the work surface, which affects how the abrasive follows contours or transitions in a project. The No Hole configuration in the name establishes that the sanding face is continuous, so shops can treat this as a solid-face disc when choosing backing pads. As a Bulk 100/Each product, this disc suits operations where a single abrasive type is used repeatedly across multiple pieces in a run.
The SP6DPF10MB-100 manufacturer part number gives an exact SurfPrep identifier for this disc, helping buyers reorder the same abrasive when they want to repeat results on future work. The SAP description PROFOAM, 6INX10MM, MEDIUM, BULK echoes the foam type, size, and medium grade, so purchasing teams can match internal records with the physical disc used on the floor. The 6 inch diameter and 10mm ProFoam thickness define the working footprint and foam depth, which affects how an operator experiences contact pressure and surface feel during sanding. The aluminum oxide abrasive noted in the name defines the mineral in contact with the work surface within the 120-150 grit band, which shapes how the disc cuts and how the surface looks when moving to the next abrasive step. The placement of this product under Abrasives and specifically Abrasive Discs ties it clearly to sanding stations in woodworking and related shop environments.
The SurfPrep ProFoam disc is described as 6 inch x 10mm, so it provides a 6 inch sanding diameter with a 10mm foam-backed structure for defined surface contact.
The disc is identified as medium 120-150 grit, placing it in a mid-range sanding step that fits between coarse shaping passes and finer surface preparation.
The product name specifies aluminum oxide, so the cutting surface uses aluminum oxide abrasive for the sanding action in the 120-150 grit range.
The 10mm ProFoam description indicates a foam-backed disc thickness that influences how the abrasive contacts surfaces and responds under hand or machine pressure.
The web description notes H&L, indicating a hook and loop backing that connects the disc to hook and loop sanding pads in typical abrasive setups.
The designation Bulk 100/Each shows this disc is supplied in a bulk quantity of 100 units, which supports shops running repeated sanding operations.
The SurfPrep ProFoam 6 inch x 10mm medium 120-150 grit aluminum oxide sanding disc, identified by part number SP6DPF10MB-100, brings together a defined 6 inch footprint, a 10mm ProFoam structure, and hook and loop backing. This combination fits abrasive setups that rely on foam-backed, medium-cut discs in regular production or installation work. For operations that standardize on SurfPrep abrasive discs, choosing this Bulk 100/Each ProFoam medium option aligns stock on the shelf with the sanding performance expected at the bench or on site.
Sold In: 100 Each