Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep ProFoam sanding disc is a 6 inch aluminum oxide abrasive disc built on a 10mm ProFoam backing in a fine 180-220 grit range, so it targets refined sanding where controlled material removal and surface consistency are important on demanding jobs.
The premium, pre-stressed minerals are engineered to stay sharp as they are worked, which supports predictable cutting across a full job rather than fading quickly in performance during extended sanding passes.
A flexible, catalyzed multi-layered adhesive bonds the abrasive to the foam, so the disc maintains bond strength while conforming to irregular shapes, allowing the abrasive layer to stay put as the disc follows profiles and changing contours.
The precision controlled modified open-coat construction spaces abrasive grains with intent, so the disc sheds dust efficiently instead of clogging, which keeps the abrasive surface active and supports extended sanding without frequent stoppages to address loading.
Self-sharpening grains mean the cutting edges renew as the surface wears, allowing faster cutting with less pressure and sustaining cutting action, which matters when working across wide surfaces or repeated components where uniform results are required.
The 10mm foam structure is tear-resistant on all surfaces and is designed for extreme sanding on both profiles and flat areas, giving the disc the resilience to stay intact while transitioning between detailed edges and broad faces during the same workflow.
This version is supplied in bulk 100/each under manufacturer part number SP6DPF10FB-100, aligning with shop environments that run higher sanding volumes and want consistent disc characteristics from piece to piece.
The 6 inch diameter layout gives a broad contact area, so each pass covers more surface and helps level panels and larger components efficiently while still allowing manageable control around edges.
The 10mm foam backing compresses as it rides over profiles and flat areas, so the abrasive can contact inside curves and subtle transitions, which helps maintain even scratch patterns instead of concentrating pressure on high spots.
The fine 180-220 grit aluminum oxide surface works in polishing-oriented sanding stages, so it prepares substrates for downstream finishing steps by smoothing the surface while leaving a consistent micro-scratch field.
The precision controlled modified open-coat configuration limits dust build-up on the working face, so the disc can stay in contact longer before resistance increases, supporting steady motion across workpieces without frequent change-outs.
The tear-resistant ProFoam structure stands up to edge contact and irregular profiles, so the disc remains intact when moving between detailed sections and flatter regions during the same installation or fabrication workflow.
This SurfPrep ProFoam 6 inch x 10mm fine disc uses a foam construction that supports extreme sanding on both profiles and flat surfaces, so a single abrasive type can bridge between contour shaping and broader leveling work throughout a project.
The flexible, catalyzed multi-layered adhesive allows the abrasive layer to flex with the foam body, so the disc conforms around edges, curves, and routed details without the abrasive lifting, supporting steady contact on shaped components.
Premium, pre-stressed minerals paired with self-sharpening grains deliver faster cutting with less pressure, so operators can maintain consistent motion over complex surfaces while the disc continues to cut efficiently through raised areas and subtle irregularities.
The tear-resistant performance on all surfaces supports aggressive passes along sharp transitions and inside contours, so the foam structure remains stable as it navigates changes in geometry, promoting continuity in the scratch pattern.
Because the fine 180-220 grit range sits in a smoothing stage, the disc is suited to dialing in surfaces after heavier grits, bringing profiles and flats to a more uniform finish ahead of coating or further refinement steps.
The precision controlled modified open-coat pattern leaves space between grains, so sanding debris has room to escape, which helps maintain active cutting edges and reduces the risk of random scratches that can occur when loaded abrasive drags across the surface.
The aluminum oxide abrasive composition balances cutting strength with predictable wear, so the grains break down in a controlled way, allowing the surface to keep removing material while gradually refining the scratch profile during extended passes.
Self-sharpening grains reset their edges as the disc wears, so the abrasive does not abruptly dull, supporting a more even cut from the start of the disc life through later passes and reducing variability between early and late-stage sanding.
The 10mm foam thickness disperses pressure across the interface, so the contact area adapts slightly to surface irregularities, helping avoid gouging while still allowing the disc to reach into lower spots that a rigid backing might skip over.
Premium, pre-stressed minerals are conditioned before use, so they respond consistently under load, which gives installers and fabricators a more repeatable sanding feel when working across multiple parts that all need to match.
The combination of extreme sanding capability for profiles and flat surfaces, tear-resistant foam, and fine 180-220 grit control means this disc can support both shaping cleanup and pre-finish smoothing, reducing changes between different abrasive formats.
The SurfPrep ProFoam sanding disc is 6 inches in diameter with a 10mm foam backing, which provides a broad sanding area while allowing the foam to conform to profiles and flat surfaces.
The disc is rated fine 180-220 grit, so it targets smoothing and refining stages where the surface needs controlled material removal while preparing for subsequent finishing processes.
The precision controlled modified open-coat layout spaces abrasive grains so dust can clear away, reducing loading and helping the disc maintain consistent cutting during longer sanding passes.
The 10mm ProFoam backing offers tear-resistant flexibility, allowing the abrasive to conform to profiles and flat areas while dispersing pressure for more even contact across the surface.
The self-sharpening grains renew their cutting edges as they wear, supporting faster cutting with less pressure and more consistent sanding quality throughout the disc life.
The manufacturer part number SP6DPF10FB-100 identifies this SurfPrep ProFoam 6 inch x 10mm fine 180-220 grit aluminum oxide sanding disc supplied in bulk 100/each for higher volume sanding environments.
The SurfPrep ProFoam 6 inch x 10mm fine 180-220 grit aluminum oxide sanding disc combines premium, pre-stressed minerals, self-sharpening grains, and a precision controlled modified open-coat design to support faster cutting with less pressure while resisting loading.
The tear-resistant ProFoam backing, flexible multi-layered adhesive, and extreme sanding capability on profiles and flat surfaces work together to deliver consistent sanding quality across varied shapes and stages, aligning well with trade shops and serious DIY users handling repeatable finishing tasks.
For workflows that rely on predictable fine sanding performance using SurfPrep abrasive discs, this SP6DPF10FB-100 bulk configuration provides a focused option for maintaining uniform results over multiple parts and ongoing projects.
Sold In: 100 Each