Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep ProFoam 6" x 1/2" Medium+ sanding disc is a foam-backed abrasive disc designed for sanding tasks where a 6 inch diameter pad is used. The 6 inch size covers a broad area with each pass, which helps move sanding along on larger faces and panels. The 1/2 inch foam layer sits between the abrasive and the backup pad, so the disc can conform better than a flat paper disc when working over subtle contours or small transitions. The Medium+ 150-180 grit range places this disc in the fine-sanding zone, which suits smoothing surfaces after heavier grits and preparing material for subsequent finishing steps. Aluminum oxide abrasive on the disc provides a cutting surface that is engineered specifically for sanding, so material removal is controlled while leaving a finer scratch pattern appropriate to this grit range.
The SurfPrep ProFoam 6" x 1/2" Medium+ sanding disc is sized for tools that accept 6 inch diameter abrasive discs, so it works wherever that common disc footprint is used. The 1/2 inch foam thickness positions the abrasive slightly off the pad surface, which helps the disc adapt to minor irregularities while still sanding across a defined area. The Medium+ 150-180 grit aluminum oxide surface operates in a fine-sanding role, stepping in after coarser grits have shaped or leveled the work. That grit placement lets this disc contribute to producing a smoother surface ready for subsequent finishing stages. The aluminum oxide abrasive remains the working face of the disc, interacting directly with the workpiece so the backing and foam support the cut rather than altering the grit behavior.
The SurfPrep ProFoam 6" x 1/2" Medium+ sanding disc fits sanding setups that rely on a 6 inch disc footprint, so it can step directly into workflows built around that pad size. In operations that move from aggressive leveling to finer refinement, the Medium+ 150-180 grit range gives this disc a defined role as a follow-up step after coarser abrasives have established flatness. The 1/2 inch foam layer allows the disc to contact slightly uneven areas across its face, which is useful when parts have gentle profiles that still need broad-area sanding rather than narrow-spot work. Because the abrasive is aluminum oxide, the cutting action stays tied to a known abrasive type used widely in sanding, which helps keep scratch expectations consistent across different stages that may also use aluminum oxide products.
Within a shop or install workflow, the ProFoam construction means this disc can serve when a more forgiving interface is preferred over a stiff backing. The foam helps moderate how pressure transfers from the sander to the surface, so the Medium+ 150-180 grit can clean up prior scratches without digging as sharply at high spots compared to a rigid disc. That behavior supports sequences where a technician wants to refine surfaces while keeping edges and soft transitions from over-cutting. The 6 inch diameter combined with the foam-backed structure lets crews stay with a familiar disc size while gaining the conformity of foam, which can streamline switching between shaping and refining passes on the same tool platform.
The SurfPrep ProFoam 6" x 1/2" Medium+ sanding disc is designed for use on sanding tools that accept 6 inch diameter abrasive discs, so it matches setups built around a 6 inch pad.
The Medium+ 150-180 grit on this SurfPrep ProFoam 6" disc suits fine sanding after coarser grits, refining the surface as part of a multi-step preparation sequence.
The 1/2 inch foam on the SurfPrep ProFoam 6" x 1/2" Medium+ sanding disc cushions the abrasive, helping it follow slight contours and moderating pressure on edges during sanding.
The SurfPrep ProFoam 6" x 1/2" Medium+ sanding disc uses aluminum oxide abrasive, which provides the cutting surface responsible for material removal at the 150-180 grit level.
The 6 inch diameter of the SurfPrep ProFoam 6" x 1/2" Medium+ sanding disc spans a broad area, so each pass covers more surface, supporting efficient sanding on larger parts.
The SP6DPFHDMP-10 designation identifies this exact SurfPrep ProFoam 6" x 1/2" Medium+ 150-180 grit aluminum oxide sanding disc, helping match the disc to ordering and job specifications.
The SurfPrep ProFoam 6" x 1/2" Medium+ sanding disc combines a 6 inch diameter, a 1/2 inch foam backing, and Medium+ 150-180 grit aluminum oxide into one abrasive option tailored for fine sanding stages. That configuration positions the disc to refine surfaces after more aggressive passes while still using the same 6 inch disc footprint common in many sanding tools. For operations that value a cushioned contact from foam along with the defined cutting behavior of aluminum oxide in this grit range, this specific SurfPrep ProFoam disc aligns the dimensions and abrasive characteristics to that role.
Sold In: 10 Each