SurfPrep Profoam sanding disc 6 inch x 1/2 inch fine 180-220 grit hook and loop multi-hole aluminum oxide sanding disc gives you a controlled, fine cut in a standard 6 inch round size, so it fits typical 6 inch sanding workflows on wood or similar materials. The fine 180-220 grit rating means the disc is suited to smoothing surfaces rather than heavy stock removal, which helps dial in a finish-ready surface after coarser grits. The 6 inch diameter provides a broad sanding path, so each pass covers more area and keeps panels or parts moving efficiently through the shop. The 1/2 inch profile described in the SurfPrep Profoam name indicates a foam-backed construction that supports the abrasive during sanding, which helps the disc conform to minor surface variations while maintaining contact. The hook and loop backing allows quick disc changes between grits, which reduces downtime when stepping through your sanding sequence.
This SurfPrep Profoam 6 inch x 1/2 inch fine 180-220 grit hook and loop multi-hole aluminum oxide sanding disc uses a hook and loop interface, so the disc presses onto a compatible hook and loop backing pad for installation. The hook and loop backing keeps the disc secured under normal sanding pressure while still allowing removal by peeling it away from the pad, which supports quick abrasive changes. The 6 inch diameter means the edge of the disc aligns with a 6 inch pad, which helps maintain even pressure and a predictable scratch pattern during passes. The multi-hole designation indicates that when used on a matching multi-hole pad, the holes line up for dust extraction, which supports cleaner operation. The SurfPrep Profoam identifier and part number SP6DPFHDFVC-10 tie this disc to a consistent specification, which helps repeat setups across reorders.
The SurfPrep Profoam 6 inch x 1/2 inch fine 180-220 grit hook and loop multi-hole aluminum oxide sanding disc fits into abrasive workflows where a 6 inch disc format is already in use, so operators can use it on tools that accept standard 6 inch hook and loop discs. The fine 180-220 grit rating positions this disc in the later stages of sanding sequences where surfaces are already flattened by coarser grits, which supports tasks like pre-finish sanding on cabinet doors, drawer fronts, or casework panels. The foam-backed Profoam construction implied by the 1/2 inch reference supports sanding over light profiles or edges while still backing the aluminum oxide abrasive, which helps reduce the risk of harsh edge lines during passes. The aluminum oxide abrasive noted in the description provides the cutting surface on the disc, which supports consistent sanding on wood or comparable substrates where aluminum oxide abrasives are commonly applied.
The SurfPrep Profoam 6 inch x 1/2 inch fine 180-220 grit hook and loop multi-hole aluminum oxide sanding disc uses a defined grit range, so the fine 180-220 designation sets expectations for how aggressively the disc will cut in a sanding progression. This helps crews assign the disc to specific sanding stages, such as final machine passes before hand sanding or finishing, to maintain repeatable surface preparation across batches. The 6 inch size anchors the disc to a standard pad dimension, which helps keep edge-to-edge pressure balanced and makes it easier to match sanding results between multiple sanders using the same disc type. The hook and loop backing allows the disc to be removed and repositioned on the pad if needed, which supports adjusting disc placement relative to multi-hole patterns to maintain dust pick-up. The multi-hole configuration works with a matching pad to move dust into the vacuum stream, which helps limit loading on the aluminum oxide abrasive and keeps the scratch pattern more consistent during longer runs.
The SurfPrep Profoam 6 inch x 1/2 inch fine 180-220 grit sanding disc uses aluminum oxide abrasive, which provides the cutting action needed for controlled sanding on suitable surfaces.
The SurfPrep Profoam sanding disc is 6 inches in diameter, which matches typical 6 inch hook and loop sanding pads used in many woodworking and finishing setups.
The hook and loop backing on the SurfPrep Profoam 6 inch x 1/2 inch disc lets it attach to matching pads by pressing into place, which supports quick disc changes between sanding stages.
The fine 180-220 grit rating on this SurfPrep Profoam disc places it in a finishing range, so it is suited to refining surfaces after coarser sanding steps.
The multi-hole detail on this SurfPrep Profoam sanding disc aligns with compatible multi-hole pads, which supports dust extraction during sanding and helps maintain a clearer work area.
The SurfPrep part number SP6DPFHDFVC-10 identifies this specific Profoam 6 inch x 1/2 inch fine 180-220 grit hook and loop multi-hole aluminum oxide sanding disc for consistent reordering.
The SurfPrep Profoam 6 inch x 1/2 inch fine 180-220 grit hook and loop multi-hole aluminum oxide sanding disc offers a defined fine grit range, a standard 6 inch diameter, and a hook and loop backing, so it fits naturally into 6 inch sanding processes that need repeatable finishing passes. The SurfPrep branding and SP6DPFHDFVC-10 identifier tie this disc to a specific specification, which supports consistent performance when you standardize on this model for fine sanding stages.
Sold In: 10 Each