SurfPrep Profoam sanding disc uses premium, pre-stressed minerals bonded to a flexible foam-backed disc, so it sands profiles and flat surfaces while maintaining even contact on the workpiece. The disc is classified as Fine 180-220 grit aluminum oxide, so it is suited to refined stock removal and surface preparation where a smoother scratch pattern is needed before subsequent finishing steps. A precision controlled modified open-coat structure spaces the abrasive, so dust has room to escape and the disc cuts consistently instead of glazing. The disc is 6 inches in diameter and 5mm thick, so it balances flexibility for contours with enough body to track cleanly on flatter areas. A multi-hole pattern across the disc face supports dust extraction performance when used on compatible backing pads, which helps keep the abrasive cutting efficiently. The SP6DPF5FVCB-100 designation identifies this specific 6 inch, 5mm, Fine grit, multi-hole bulk configuration for repeat ordering.
The SurfPrep Profoam 6 inch disc is described as suitable for extreme sanding on profiles and flat surface, so the combination of foam backing and abrasive construction is tailored to follow shaped moldings while still performing on broad faces. The 5mm thickness gives the foam room to conform, so it can reach into light contours and transitions without cutting through edges too aggressively. The multi-hole layout across the disc works with dust extraction on suitable machines, so fine debris is pulled away from the work zone and the abrasive surface, supporting a cleaner working area. Because the disc uses aluminum oxide abrasive in a Fine 180-220 grit range, it serves well where you want a finer finish after coarser shaping, preparing the surface for later finishing steps that benefit from reduced scratch visibility.
The SurfPrep Profoam 6 inch x 5mm Fine 180-220 grit disc is described for extreme sanding on profiles and flat surface, so it fits tasks that move between detailed edge work and broader panel sanding without changing abrasive types. Premium, pre-stressed minerals combined with self-sharpening grains mean the cutting points stay effective as they wear, so the disc supports longer sanding runs before abrasive performance tapers off. The precision controlled modified open-coat pattern helps the disc shed dust, so it maintains efficient cutting even when working on materials that tend to clog tighter-coated abrasives. Tear-resistant behavior on all surfaces is specified, so the foam-backed disc withstands directional changes and edge contact, supporting more aggressive maneuvering around moldings. The Fine 180-220 grit rating suits surface refinement, so it prepares workpieces for later finishing stages where uniform scratch patterns are important for visual consistency.
The flexible, catalyzed multi-layered adhesive system holds the aluminum oxide grains to the foam, so the abrasive layer stays stable as the disc flexes around contours, helping avoid random scratches from dislodged grit. A multi-hole pattern across the disc face works with extraction on compatible setups, so dust is drawn away from the contact zone and the surface stays more visible as you sand. The foam-backed Profoam structure provides controlled cushioning, so the disc can bridge small low spots and soften transitions rather than cutting grooves, which supports consistent sanding quality across a run of parts. Because the product description calls out consistent sanding quality as a benefit, the combined effect of self-sharpening grains, open-coat spacing, and tear-resistant construction is aimed at repeatable surface results from disc to disc and job to job.
The SurfPrep Profoam disc uses aluminum oxide abrasive, so it delivers a balanced cut suitable for general sanding and finishing where controlled stock removal and a consistent scratch pattern are needed.
The Fine 180-220 grit designation means the disc targets finer sanding stages, so it is suited to surface refinement after coarser grits and before final finishing steps requiring smoother surfaces.
The 5mm Profoam backing provides cushioning and flexibility, so the disc can follow profiles and transitions while maintaining even pressure instead of digging sharply into edges.
The multi-hole pattern distributes dust extraction across the face, so debris is removed from the sanding area and the abrasive keeps cutting rather than loading with material.
Self-sharpening grains fracture during sanding, so new cutting edges appear as the disc wears, supporting a more consistent cutting rate over the usable life of the disc.
The tear-resistant construction is designed to hold together on all surfaces, so the disc tolerates edge contact and direction changes during contour work without ripping as easily.
The SurfPrep Profoam 6 inch x 5mm Fine 180-220 grit multi-hole aluminum oxide sanding disc is configured for profiles and flat surface sanding where consistent sanding quality matters. Its premium, pre-stressed minerals, self-sharpening grains, and precision controlled modified open-coat layout support efficient cutting with less pressure. Tear-resistant behavior on all surfaces and the flexible, catalyzed multi-layered adhesive help the disc stay intact while working complex shapes. For bulk 100 piece needs identified by part number SP6DPF5FVCB-100, this disc provides a defined Fine grit option for surface preparation workflows.
Sold In: 100 Each