SurfPrep Profoam 6 inch sanding disc describes a SurfPrep abrasive disc sized for 6 inch tools, so it matches common random-orbit and disc sanders for cabinet, millwork, and furniture work. The product name lists Profoam and 5mm, which indicates a foam-backed design that helps the abrasive follow light contours and profiles without cutting flat spots on delicate edges. The web description states PF DISC 5MM H&L, confirming a hook and loop backing that allows fast disc changes and repeatable disc centering on hook and loop backup pads. The product name specifies very fine 280-320 grit aluminum oxide, so it targets fine sanding stages where a uniform scratch pattern prepares surfaces for coatings. The description notes multi-hole, meaning the disc face is perforated for dust extraction, which supports better visibility and cleaner sanding on woodworking substrates.
The product name clearly states 6 inch, so the disc is sized for sanders and backup pads built around a 6 inch diameter, which is common in cabinet and woodworking shops. The SAP description and web description identify H&L, describing hook and loop backing that mates with hook and loop pads, helping discs locate consistently under the pad face. The same web description lists PF and 5MM, linking this disc to Profoam 5mm foam thickness that adds cushioning between the pad and work surface, which helps control cut on edges and molded profiles. The multi-hole detail in both product name and SAP description shows the face is perforated, allowing dust to move through compatible vacuum pads for improved surface cleanliness during fine sanding.
The product name specifies very fine 280-320 grit, placing this disc at the finer end of sanding sequences for woodworking and finishing tasks. At this grit range the aluminum oxide abrasive indicated in the name refines earlier sanding marks into a smoother, more uniform scratch pattern suited to pre-finish or between-step work. The category listing as Abrasives and Abrasive Discs confirms its role as a sanding consumable in cabinet and woodworking environments. The 6 inch diameter described in the product name fits the footprint of many shop sanders, so operators can move from leveling to detail sanding on broad panels, doors, and components without changing tool size. The Profoam 5mm construction referenced in the SAP description connects the foam layer to added forgiveness on edges, which reduces the tendency to dig in when following light contours or easing sharp transitions.
The web description notes PF DISC 5MM H&L MH VFINE 280-320, tying together Profoam, 5mm thickness, hook and loop backing, multi-hole pattern, and very fine 280-320 grit in a single SurfPrep abrasive disc. The hook and loop detail supports repeatable disc placement on a compatible pad, which maintains balance from change to change and helps keep the sanding pattern consistent across parts. The multi-hole aspect indicated in both the product name and SAP description allows dust to pass through the disc into matched vacuum pads, which supports a clearer surface for spotting defects before moving to coating. The aluminum oxide callout in the name identifies a common shop abrasive that provides an effective balance of cut and wear, helping production lines and serious DIY setups run predictable sanding cycles. The manufacturer part number SP6DPF5VFVCB-100 links specifically to this 6 inch, 5mm Profoam, very fine, multi-hole configuration, giving purchasers a precise reference when standardizing abrasives across crews and locations.
The SurfPrep Profoam 6 inch sanding disc uses aluminum oxide, as stated in the product name, which provides an effective cutting action for woodworking and similar shop materials.
The product name lists very fine 280-320 grit, placing this SurfPrep disc in a fine sanding range suited to smoothing surfaces before subsequent finishing steps.
The web description specifies H&L, meaning hook and loop, so the SurfPrep disc attaches to hook and loop backup pads for quick disc changes during sanding.
The product name and SAP description note multi-hole, indicating perforations that allow dust to move through compatible pads, supporting cleaner sanding conditions.
The SAP description lists PROFOAM 5MM, indicating a 5mm foam layer that cushions the abrasive, helping it follow light contours and edges during sanding.
The category Abrasives and Abrasive Discs, plus the very fine 280-320 grit rating, position this SurfPrep disc for fine woodworking and finishing-related sanding tasks.
The SurfPrep Profoam 6 inch sanding disc pairs a 6 inch diameter with hook and loop backing, aligning with many shop sanders for straightforward use. Its very fine 280-320 grit aluminum oxide face supports fine-stage sanding where surface quality matters. The Profoam 5mm and multi-hole details described in the product data show a cushioned, dust-managing disc design for controlled work on edges, profiles, and broad surfaces. For operations that rely on consistent abrasive performance, the specific SurfPrep identifier SP6DPF5VFVCB-100 provides a clear standard when specifying this disc for repeat projects.
Sold In: 100 Each