SurfPrep Riptide 220 grit sanding sheet is a 3 inch by 4 inch abrasive sheet designed for controlled sanding where a compact pad size matters. The 3 x 4 inch format focuses the cutting area, which helps reach small panels, edges, and profiles without overworking adjacent surfaces. The sheet uses aluminum oxide abrasive, so each pass delivers a consistent cut suitable for fine sanding steps where a smoother surface is needed before moving forward in the process. The abrasive is bonded to C-weight paper, giving the sheet a firm backing that supports even pressure during sanding. That firmer backing helps maintain a flatter scratch pattern, which is important when preparing surfaces in woodworking or similar shop environments. The design is part of SurfPrep Riptide, so installers and shop users can match this sheet to other SurfPrep abrasive steps by grit and size.
This C-weight paper sanding sheet uses a hook and loop backing, so it mounts to compatible hook and loop sanding pads without tools. That mounting style holds the 3 x 4 aluminum oxide sheet flat against the pad, which supports better contact across the working area. The sheet has six holes in the abrasive face, and when these 6 holes are lined over matching pad holes, air can move through the pattern as the sander runs. That airflow helps carry dust away from the cutting surface during sanding, which keeps the 220 grit working more consistently from the first pass to the last. The firm C-weight paper backing supports this contact, so the pad and sheet work together as a stable unit over the workpiece.
The SurfPrep Riptide 220 grit sanding sheet is built in a 3 inch by 4 inch format, so it naturally fits sanding workflows that rely on smaller rectangular pads. That size helps installers and shop users work cabinet parts, trim sections, or similar narrow components where larger pads would overlap edges. The aluminum oxide abrasive on this sheet allows controlled material removal suited to a fine grit, which supports steps such as final smoothing before coatings or between lighter sanding passes. The 6-hole design in the face of the sheet aligns with a matching pad pattern, so vacuum or airflow can pull dust through the abrasive surface. As dust is drawn away from the sanding zone, the abrasive stays exposed longer, helping it continue to cut rather than loading prematurely. The hook and loop backing locks onto a compatible pad surface, so repeated movements or directional changes during sanding do not shift the sheet, which matters when precise scratch direction or alignment is important on visible parts.
This SurfPrep abrasive sheet 3 x 4 uses C-weight paper, a backing weight that gives the abrasive a firm feel in the hand or on a powered pad, which helps distribute pressure evenly across the face of the sheet. That consistent pressure helps produce a more uniform scratch pattern from the 220 grit aluminum oxide sanding sheet, which is particularly important where surfaces will be inspected closely after finishing. The hook and loop interface on the back allows the sheet to be removed and reapplied on the pad without damaging the abrasive face, so users can move between different SurfPrep Riptide grits while keeping the same pad. The 6-hole hook and loop sanding sheet layout is centered in the abrasive area, so when aligned to a 6-hole pad, dust moves through the middle of the working zone instead of only at the edges. This airflow pathway supports better visibility of the work surface, and because the abrasive face stays clearer, the sheet maintains its cutting action more predictably from start to finish on each part.
The SurfPrep Riptide 220 grit sanding sheet measures 3 inches by 4 inches, which focuses sanding on smaller areas where a compact pad is useful for detail and edge work.
This SurfPrep sheet uses aluminum oxide abrasive, which provides a consistent cutting action suitable for fine sanding steps where a smoother surface is needed.
The sanding sheet uses C-weight paper backing, giving it a firmer feel that supports even pressure across the face for a more uniform scratch pattern during sanding.
The 6-hole pattern allows dust to move through the sheet when aligned with a matching pad, helping keep the abrasive face clearer so the 220 grit continues to cut consistently.
The hook and loop backing lets the sheet attach to and release from compatible pads quickly, which reduces downtime when changing grits or replacing worn abrasive.
This 220 grit sheet serves as a fine sanding step, helping smooth surfaces and refine the scratch pattern in preparation for subsequent finishing or coating processes.
The SurfPrep Riptide 220 grit sanding sheet combines a 3 inch by 4 inch size, 6-hole pattern, and hook and loop backing to support focused sanding in tighter areas. The aluminum oxide abrasive bonded to C-weight paper provides a firm, consistent cutting surface that helps maintain an even scratch pattern at a fine grit level. For woodworking and related shop tasks where controlled material removal and surface preparation are important, this SurfPrep 3 x 4 hook and loop sheet aligns well with workflows that depend on small rectangular pads and efficient sheet changes.
Sold In: 1 Box