800LCA Schlage drawer lock body is a zinc die cast deadbolt lock body designed for drawers that use Schlage compatible key-in-knob cylinders. Its oil rubbed bronze finish establishes a specific visual match wherever this color is used on cabinetry. The lock body accepts Schlage compatible cylinders with a 1-1/8 inch cylinder length, so the body aligns with installations built around this standard size. The design is classified under Deadbolt Locks in the Locks and Latches category, which means the locking action uses a projecting bolt rather than a latch tongue. The product is identified as Olympus Lock, Inc. manufacturer part number 800LCA-10B, giving installers a precise reference when matching existing hardware. The lock body is further described as a Schlage Less Deadbolt Drawers Lock Body, which positions it as the locking core in a drawer-focused setup.
The 800LCA Schlage Less Deadbolt Drawers Lock Body is specified for a 1-1/8 inch cylinder length, so it matches Schlage compatible key-in-knob cylinders built to that dimension. The body uses a set screw cylinder release mechanism that allows the cylinder to be released for rekeying, which matters when adjusting key control on drawer installations. Because the body will accept other manufacturer's Schlage compatible key-in-knob cylinders, installers can use Schlage compatible cylinders from various sources as long as they match the length requirement. This combination of a defined cylinder length and Schlage compatibility gives a clear path when selecting cylinders to pair with the body.
The Olympus Lock, Inc. 800LCA-10B is positioned for drawer applications where a Schlage compatible cylinder is preferred, because it is described as a Schlage Less Deadbolt Drawers Lock Body. Its classification under Deadbolt Locks focuses it on situations where a projecting deadbolt action is needed rather than a spring latch. The lock body is listed in the Locks and Latches category, aligning it with cabinet and furniture hardware workflows. Since it will accept other manufacturer's Schlage compatible key-in-knob cylinders, it integrates into environments already standardized around Schlage compatible keyways. The specified 1-1/8 inch cylinder length anchors it to installations designed for that cylinder projection, which ties the body into drawer fronts drilled to suit this dimension.
The 800LCA Schlage drawer lock body uses a set screw cylinder release mechanism that allows the cylinder to be removed for rekeying, so key systems can be changed while keeping the same lock body in place. This rekeyable approach matters when managing multiple drawers, because the same body can stay installed while key control evolves. The product is described as easily rekeyable via this set screw mechanism, indicating that the release method is built into the body for field cylinder removal. The lock body passed ANSI/BHMA A156.11 Grade 1 performance requirements, which signals a tested performance level for this deadbolt lock category. Together with the zinc die cast construction, these traits align with repeatable action during cylinder changes and ongoing drawer use. The ability to accept other manufacturer's Schlage compatible key-in-knob cylinders supports future cylinder swaps while retaining the original body in the drawer.
The 800LCA Schlage drawer lock body will accept Schlage compatible key-in-knob cylinders with a 1-1/8 inch cylinder length, so it aligns with Schlage style cylinder setups using that dimension.
The 800LCA lock body is easily rekeyable via a set screw cylinder release mechanism, which allows the Schlage compatible cylinder to be released and changed without replacing the lock body.
The Olympus Lock, Inc. 800LCA-10B lock body passed ANSI/BHMA A156.11 Grade 1 performance requirements, indicating it is tested to that deadbolt lock category standard.
The 800LCA-10B lock body is zinc die cast, providing a rigid housing that supports the Schlage compatible cylinder and deadbolt components during drawer operation.
The Schlage Less Deadbolt Drawers Lock Body 800LCA-10B has an oil rubbed bronze finish, allowing it to visually coordinate with oil rubbed bronze cabinet and drawer hardware.
The manufacturer part number for this Olympus Schlage Less Deadbolt Drawers Lock Body is 800LCA-10B, which provides a precise identifier during selection and ordering.
The Olympus Lock, Inc. 800LCA Schlage Less Deadbolt Drawers Lock Body pairs zinc die cast construction with a set screw cylinder release, so drawers using Schlage compatible 1-1/8 inch cylinders can be keyed and rekeyed around a stable body. Its oil rubbed bronze finish and ANSI/BHMA A156.11 Grade 1 performance classification define both appearance and performance expectations for drawer installations using Schlage compatible key-in-knob cylinders. Using the 800LCA-10B part reference simplifies matching this lock body to Schlage oriented drawer layouts.
Sold In: 1 Each