Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
800LCM Schlage drawer lock body from Olympus Lock, Inc. is a deadbolt drawer lock body in oil rubbed bronze for use with a 1-3/8 inch cylinder, giving you a defined lock format for drawer security work. As part of the deadbolt locks product class, it provides solid bolt engagement for drawer applications where a firm locked position matters. The zinc die cast construction forms a rigid lock body, supporting long-term alignment of the bolt and cylinder in typical cabinet environments. The oil rubbed bronze finish provides a dark architectural appearance that coordinates with similar finishes on other visible cabinet hardware. This lock body is designed for Schlage cylinders, so it matches projects already standardized on Schlage key-in-knob style systems. Olympus model 800LCM-10B identifies the exact configuration, helping you match replacements and maintain consistent hardware across multiple drawers.
This Olympus 800LCM Schlage drawer lock body is specified for a 1-3/8 inch cylinder length, so the housing depth is built around that projection for correct seating and engagement. The design will accept other manufacturer's Schlage compatible key-in-knob cylinders, which keeps cylinder sourcing flexible while maintaining the same lock body footprint. Because the lock body is evaluated to ANSI/BHMA A156.11 Grade 1 deadbolt performance requirements, it supports use where a higher level of drawer security and durability is required. The zinc die cast material helps maintain the relationship between the cylinder, driver, and deadbolt, supporting repeatable key action after installation.
The 800LCM Schlage drawer lock body from Olympus Lock, Inc. is intended for drawer applications requiring a deadbolt-style lock body. Its classification under Locks and Latches and Deadbolt Locks points to use in cabinetry where a projecting deadbolt is desired for securing the drawer front to a strike. The specified 1-3/8 inch cylinder length focus means it fits layouts built around that standard cylinder depth, which is common in many commercial casework and millwork projects. Because the lock body will accept other manufacturer's Schlage compatible key-in-knob cylinders, it can be used on jobs where Schlage key systems are already established, allowing a consistent keyway across doors and drawers. The oil rubbed bronze finish helps this drawer lock body visually coordinate with oil rubbed bronze pulls, knobs, and other trim in finished cabinetry.
The easily rekeyable set screw cylinder release mechanism is central to how this 800LCM Schlage drawer lock body supports long-term projects. By allowing the cylinder to be released via a set screw, keying can be changed by swapping compatible cylinders while leaving the lock body installed in the drawer, which reduces disruption to finished casework. The fact that the lock body passed ANSI/BHMA A156.11 Grade 1 performance requirements means its deadbolt function has been evaluated against a defined standard, supporting use in drawers that see frequent locking and unlocking. The zinc die cast construction keeps the internal geometry stable, which supports a clean interface between the key-in-knob cylinder, the universal driver, and the deadbolt movement. Because the body is designed around a 1-3/8 inch cylinder length and Schlage compatible key-in-knob cylinders, installers can plan cylinder depth, key system compatibility, and lock body selection as a matched set across a bank of drawers.
The Olympus 800LCM-10B is a deadbolt drawer lock body, so it uses a projecting deadbolt to secure a drawer front to a corresponding strike point.
The 800LCM Schlage drawer lock body is designed for a 1-3/8 inch cylinder length, so planning drawer construction around that depth supports proper cylinder engagement.
This lock body is for Schlage cylinders and will accept Schlage compatible key-in-knob cylinders, which supports integration into existing Schlage key systems.
The 800LCM lock body uses an easily rekeyable set screw cylinder release mechanism, allowing cylinder changes while keeping the installed lock body in place.
Passing ANSI/BHMA A156.11 Grade 1 performance requirements indicates this deadbolt drawer lock body meets a high standard for tested deadbolt performance.
The 800LCM Schlage drawer lock body is zinc die cast, providing a rigid housing that supports the cylinder, driver, and deadbolt components.
The Olympus 800LCM Schlage drawer lock body in oil rubbed bronze provides a deadbolt drawer solution built around a 1-3/8 inch Schlage compatible cylinder. With an easily rekeyable set screw cylinder release mechanism, it supports future key changes without disturbing installed casework. Passing ANSI/BHMA A156.11 Grade 1 performance requirements, it aligns with demanding deadbolt performance needs. Use this lock body when you want zinc die cast construction, oil rubbed bronze appearance, and Schlage compatible key-in-knob cylinder support in the same drawer lock format.
Sold In: 1 Each
