
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
800LCA Schlage drawers lock body from Olympus Lock, Inc. is a deadbolt lock body designed for drawer applications where a Schlage compatible key-in-knob cylinder with 1-1/8 inch length is used, so it targets common commercial cylinder setups. The lock body is part of the deadbolt locks class, so it provides a positive bolt throw that helps hold drawers closed in demanding environments. Its satin chrome 26D finish presents a neutral, trade-standard look that blends with typical architectural hardware on cabinets. The product is described as lock body only for Schlage cylinder, 1-1/8 inch, so it is focused on working with that cylinder size and interface. The lock will accept other manufacturer's Schlage compatible key-in-knob cylinders, so it supports flexibility when matching cylinders across a job.
The 800LCA-26D lock body is designed for a Schlage compatible key-in-knob cylinder with 1-1/8 inch length, so the cylinder length and interface guide the bore depth and layout in the drawer front. The easily rekeyable set screw cylinder release mechanism holds the cylinder in place and then allows removal through the release action, so installers can fit the cylinder, tighten it, and later extract it during key system changes without replacing the lock body. The deadbolt style body from the deadbolt locks category provides a firm bolt movement, so alignment of the bolt with the chosen strike location becomes the main installation focus.
This Olympus Lock, Inc. 800LCA Schlage drawers lock body is intended for drawer applications that use Schlage compatible key-in-knob cylinders with a 1-1/8 inch cylinder length, so it aligns with many standard key systems in commercial woodworking and casework. Being in the deadbolt locks product class, it provides a bolt action that engages with a strike on the case or cabinet frame, so it suits drawers that need a defined locked and unlocked state rather than simple latching. The satin chrome 26D appearance coordinates with satin chrome hardware commonly specified on cabinetry, so designers and builders can keep a consistent finish across visible lock fronts and pulls.
The easily rekeyable design, using a set screw cylinder release mechanism, allows the cylinder to be released for rekeying, so locksmiths and facility teams can update keying by working only with the cylinder while leaving the 800LCA-26D lock body in the drawer. This reduces disruption to installed cabinetry when key systems change. The fact that the product passed ANSI/BHMA A156.11 Grade 1 performance requirements means it has been tested to that performance level, so specifiers can align the lock body with projects calling for Grade 1 deadbolt locks in drawers. The zinc die cast construction provides a rigid body that supports the tailpiece, driver bars, and bolt motion, so the internal parts operate within a stable housing over repeated locking and unlocking cycles during normal drawer use.
The Olympus 800LCA-26D is a deadbolt lock body for drawers, so it provides a bolt-style locking action suited to securing drawer fronts against a matching strike.
The 800LCA Schlage drawers lock body is for Schlage compatible key-in-knob cylinders with a 1-1/8 inch cylinder length, so that dimension drives the drawer bore depth.
The 800LCA-26D lock body is easily rekeyable via a set screw cylinder release mechanism, so the cylinder can be released and changed while the body stays installed.
The drawers lock body passed ANSI/BHMA A156.11 Grade 1 performance requirements, so it can be used where a Grade 1 deadbolt lock body is required.
The Olympus 800LCA lock body will accept other manufacturer's Schlage compatible key-in-knob cylinders, so it supports matching various Schlage compatible cylinders on a project.
The 800LCA-26D drawers lock body is zinc die cast with a satin chrome 26D finish, so it offers a solid metal housing with a common architectural appearance.
The Olympus Lock, Inc. 800LCA Schlage drawers lock body combines an easily rekeyable set screw cylinder release mechanism with a design made for 1-1/8 inch Schlage compatible key-in-knob cylinders, so it fits key-control workflows. Its ANSI/BHMA A156.11 Grade 1 performance and zinc die cast construction support demanding drawer applications that use a deadbolt lock body. Selecting this satin chrome 26D lock body aligns drawers with Schlage compatible cylinder systems while maintaining a consistent deadbolt locks standard across cabinetry.
Sold In: 1 Each