800LCM Schlage Less Deadbolt Drawers Lock Body, Satin Chrome, Cylinder Length 1-3/8"

800LCM Schlage Drawer Lock Body For Secure Drawers

800LCM Schlage drawer lock body from Olympus Lock, Inc. is a deadbolt drawer lock body designed for use with Schlage compatible key-in-knob cylinders and 1-3/8 inch cylinders, so installers can match existing Schlage key systems on drawer applications. This lock body is part of the 800LCM Schlage less deadbolt drawers lock family and fits into deadbolt lock workflows where only the body is needed, allowing reuse of cylinders that match site keys. The cylinder length of 1-3/8 inch gives a defined interface for projects already laid out around that cylinder size, which simplifies hardware selection when standardizing across casework. As a deadbolt lock in the Locks and Latches category, it provides a positive bolt action that suits drawer security layouts where latch-style hardware is not desired.

Key Lock Body Details That Support Daily Use

• The easily rekeyable design via a set screw cylinder release mechanism allows cylinders to be removed and serviced through the release feature, which helps locksmiths and millworkers handle keying changes without replacing the entire lock body.
• Passing ANSI/BHMA A156.11 Grade 1 performance requirements indicates the lock body has been tested to a recognized Grade 1 standard, giving specifiers a performance benchmark when selecting hardware for demanding drawer environments.
• The zinc die cast construction defines the base material of the lock body, which gives fabricators a known substrate when mortising, routing, or aligning the body within metal or wood drawer fronts.
• Acceptance of other manufacturers Schlage compatible key-in-knob cylinders means the lock body can work with Schlage compatible cylinders from different makers, which helps shops standardize keyways while choosing cylinder lines that match their existing master key systems.
• The satin chrome 26D finish on the 800LCM-26D provides a defined appearance for the visible lock edge, which helps casework designers coordinate finish with adjacent pulls and hinges on commercial drawer runs.

Lock Body Setup And Cylinder Interface Details

The 1-3/8 inch cylinder length specified for this lock body sets the engagement depth for Schlage compatible key-in-knob cylinders, which helps installers cut drawer fronts and prep boring depths to a known dimension. The set screw cylinder release mechanism provides the rekeyable function by mechanically holding and releasing the cylinder, so rekey work revolves around loosening the set screw rather than disturbing the drawer construction. Because the body is built to accept Schlage compatible cylinders, hardware planners can align this lock body with Schlage key systems already used on doors, simplifying key management across a project.

Using This 800LCM-26D Lock Body In Drawer Projects

Where This Deadbolt Drawer Lock Body Fits Best

This lock body is categorized as a deadbolt lock for drawers, so it fits applications where a straight-throw bolt is preferred over spring latches in cabinetry or casework. The 800LCM Schlage less deadbolt drawers lock body format suits projects that already specify Schlage compatible cylinders, allowing fabricators to build locking drawers that tie into existing key-in-knob keyways. With its satin chrome 26D finish, the visible portions of the lock body align with satin chrome schemes on commercial fixtures, helping maintain a consistent appearance around drawer fronts and cabinet faces. Since the body accepts other manufacturers Schlage compatible key-in-knob cylinders, it can be used in facilities that rely on Schlage compatible key platforms from brands such as Medeco or Assa, while still using this Olympus Lock body in the drawer itself.

Why Rekeyable Design And Components Matter On Site

The easily rekeyable set screw cylinder release mechanism gives locksmiths and casework shops a defined procedure for cylinder changes, so key rotations can be handled using the existing 1-3/8 inch cylinders rather than replacing drawer hardware. The fact that the lock body has passed ANSI/BHMA A156.11 Grade 1 performance requirements provides a documented performance level, which helps specifiers align drawer locks with broader building standards that call for Grade 1 deadbolt hardware. Its zinc die cast construction creates a stable, machined body for the deadbolt components, supporting consistent bolt alignment with the strike in repeated cabinet runs. The manufacturer part number 800LCM-26D identifies this exact satin chrome version within Olympus Lock, Inc. offerings, giving distributors and millwork shops a precise reference when matching submittals, drawings, or reorders on multi-phase projects.

Common Questions About This Schlage Cylinder Lock Body

Select This 800LCM-26D Lock Body For Schlage Systems

The 800LCM Schlage drawer lock body from Olympus Lock, Inc. brings a deadbolt drawer lock body, a 1-3/8 inch Schlage compatible cylinder interface, and ANSI/BHMA A156.11 Grade 1 performance to drawer security. For projects built around Schlage compatible key-in-knob cylinders and satin chrome hardware, this 800LCM-26D body provides a defined, rekeyable lock platform ready to match existing key systems.