Description
800LCA Schlage Drawer Lock Body For Secure Drawers
800LCA Schlage drawer lock body identifies this Olympus Lock, Inc. deadbolt-style lock body as designed for drawers, so installers have a clear match when specifying hardware for cabinetry or casework using Schlage format cylinders. The SAP description stating "LOCK BODY ONLY, FOR SCHLAGE CYL, 1-1/8IN" defines it as a dedicated body for 1-1/8 inch Schlage cylinders, which supports consistent hardware selection when standardizing across multiple drawer locations. The web description stating "Easily rekeyable via set screw cylinder release mechanism" means the cylinder can be released with a set screw, so cylinders can be changed or rekeyed without replacing the entire lock body during maintenance cycles. Classification in "Deadbolt Locks" shows it functions as a deadbolt-style mechanism, giving drawers a positive bolt engagement where keyed security is required. The bright brass reference in the product name ties this lock body to bright brass hardware projects so trim and locks visually coordinate.
Deadbolt Lock Details That Support Drawer Work
- The statement "Easily rekeyable via set screw cylinder release mechanism" describes a design where the cylinder is retained by a set screw, allowing the core to be swapped, which lets facilities change keying while keeping the installed lock body in place.
- The web description "Passed ANSI/BHMA A156.11 Grade 1 performance requirements" confirms this deadbolt lock body meets Grade 1 criteria, providing a performance level that supports demanding commercial or high-use drawer applications.
- The detail "Zinc die cast" identifies the lock body material, giving installers a zinc die cast housing that maintains dimensional stability for consistent cylinder fit and bolt operation in cabinet and drawer fronts.
- The note "Will accept other manufacturer's Schlage compatible key-in-knob cylinders" shows the body accepts Schlage compatible key-in-knob cylinders, giving flexibility to match existing key systems while using this lock body.
- The SAP description "FOR SCHLAGE CYL, 1-1/8IN" specifies it is built for a 1-1/8 inch cylinder length, guiding installers toward cylinders that project correctly through typical drawer fronts for reliable key engagement.
Drawer Lock Body Fit And Rekeying Workflow
The SAP description "FOR SCHLAGE CYL, 1-1/8IN" defines the cylinder length this body is designed around, so a 1-1/8 inch Schlage format cylinder seats correctly through the drawer front and into the zinc die cast housing for proper tailpiece engagement. The product name calling out "Drawers Lock Body" ties its geometry and function to drawer applications, allowing hardware planners to assign it specifically where drawer deadbolts are required. The easily rekeyable set screw cylinder release mechanism lets the installer loosen a set screw to remove the cylinder, so rekeying cycles rely on cylinder swaps instead of full body replacement, streamlining service work. Passing ANSI/BHMA A156.11 Grade 1 performance requirements positions this body for projects where lock operation is subjected to frequent use, so drawer security hardware can be standardized to a tested level.
How This Schlage Cylinder Lock Body Works In Use
Where This Drawer Lock Body Is Typically Applied
The product class "Deadbolt Locks" and the wording "Drawers Lock Body" in the product name identify this Olympus Lock, Inc. 800LCA-US3 body as a deadbolt-style mechanism for drawer fronts, which fits applications where drawers require keyed security rather than simple latches. Being described as "LOCK BODY ONLY, FOR SCHLAGE CYL, 1-1/8IN" means it is intended to pair with a 1-1/8 inch Schlage compatible cylinder, so millwork that already uses Schlage key systems can extend that keying scheme to drawer locations. The statement that it "Will accept other manufacturer's Schlage compatible key-in-knob cylinders" shows that facilities using Schlage compatible key-in-knob cylinders from different manufacturers can still deploy this body, tying a variety of cylinder sources into one lock platform so key control remains consistent across doors and drawers in the same project. The bright brass reference in the product name connects visually oriented projects to this lock, helping designers align drawer security hardware with bright brass trim and other bright brass door hardware already specified.
Why Rekeyable Design And Grade 1 Rating Matter
The web description "Easily rekeyable via set screw cylinder release mechanism" highlights that the cylinder is held by a set screw, so technicians can release the cylinder when key changes are required and then reuse the same zinc die cast body, reducing disturbance to the drawer front. This design also allows the body to remain anchored while different Schlage compatible key-in-knob cylinders are used, so replacement or master key changes happen at the cylinder level rather than at the casework. The phrase "Passed ANSI/BHMA A156.11 Grade 1 performance requirements" indicates the lock body has been tested to Grade 1 criteria, so planners can select it when project specifications call for Grade 1 deadbolt performance on cabinet drawers. The material detail "Zinc die cast" describes a rigid body that supports precise cylinder and tailpiece alignment, which benefits installers by maintaining smooth deadbolt action after repeated locking and unlocking in high-use environments. The combination of a Grade 1 designation, zinc die cast construction, and Schlage compatible cylinder acceptance gives locksmiths and millworkers a single body that can be used in standardized key systems while supporting long-term service routines based on cylinder swaps.
Common Questions About This Drawer Lock Body
What type of lock is the 800LCA Schlage drawer lock body?
The 800LCA Schlage drawer lock body is identified as a deadbolt lock body for drawers, so it provides a deadbolt-style locking action rather than a simple latch on drawer fronts.
Which cylinders work with this Schlage compatible drawer lock body?
This drawer lock body is described as "FOR SCHLAGE CYL, 1-1/8IN" and will accept other manufacturer's Schlage compatible key-in-knob cylinders, so it uses 1-1/8 inch Schlage format cylinders.
How does the easily rekeyable set screw mechanism help?
The 800LCA Schlage drawer lock body uses a set screw cylinder release mechanism, allowing the cylinder to be removed and rekeyed while the lock body stays installed in the drawer front.
What does the ANSI/BHMA A156.11 Grade 1 rating mean for use?
This lock body passed ANSI/BHMA A156.11 Grade 1 performance requirements, so it is suited for drawer installations where a Grade 1 deadbolt rating is required or preferred.
What material is this Olympus drawer lock body made from?
The web description states the body is zinc die cast, giving the lock housing a rigid structure that helps maintain alignment between the cylinder, tailpiece, and deadbolt during drawer operation.
How does the 1-1/8 inch cylinder length affect drawer installation?
The SAP description specifies "FOR SCHLAGE CYL, 1-1/8IN", so a 1-1/8 inch cylinder projects correctly through typical drawer fronts to engage the internal tailpiece and deadbolt mechanism.
Selecting This Lock Body For Schlage Drawer Systems
The product name "800LCA Schlage Less Deadbolt Drawers Lock Body" and SAP description "LOCK BODY ONLY, FOR SCHLAGE CYL, 1-1/8IN" identify this Olympus Lock, Inc. unit as a drawer-focused deadbolt body matching Schlage 1-1/8 inch cylinder formats, so it aligns well with projects standardized on Schlage compatible key systems. The web description further states that it will accept other manufacturer's Schlage compatible key-in-knob cylinders and has passed ANSI/BHMA A156.11 Grade 1 performance requirements, giving installers a zinc die cast, Grade 1 body that supports easily rekeyable service using the set screw cylinder release mechanism. For drawers that need keyed security tied into Schlage style cylinders, this lock body offers a defined format to specify and deploy.