Schlage C Keyway Deadbolt Drawer Lock For Cabinets

Schlage C keyway deadbolt drawer lock gives you a pin tumbler drawer security solution that matches existing Schlage C key systems while using a 1-1/8 inch cylinder length. The Olympus Lock 800 series design uses a solid brass cylinder in a zinc die cast body, so the cylinder handles the key work while the body supports the lock in the drawer front. The satin chrome 26D finish presents a neutral, trade-standard appearance that suits commercial and shop cabinetry where finishes need to blend with other hardware. Keyed alike #102 lets multiple locks operate on the same key code, which simplifies key management when you want a group of drawers controlled together. The Schlage C keyway format allows integration with other Schlage C keyway locks, so one key pattern can operate several lock points across a project.

Deadbolt Drawer Lock Details That Support Job Needs

• The pin tumbler mechanism provides a familiar keying format, which streamlines keying work when matching to other Schlage C systems on a project.
• The easily rekeyable set screw cylinder release mechanism lets the cylinder be changed on-site, which reduces downtime when rekeying is required for security changes.
• The lock can be keyed together with other Schlage C keyway locks, which supports master key strategies and coordinated access across cabinets or furniture using the same keyway.
• Passing ANSI/BHMA A156.11 Grade 1 performance requirements shows the lock has been tested to a high performance standard, which matters where drawers see frequent locking and unlocking cycles.
• Key removable in locked or unlocked position lets users remove the key after securing or accessing the drawer, which supports simple operation in both storage and active-use environments.
• Standard function locks are non-handed, which allows installation on either side orientation of a drawer without stocking separate left- and right-hand versions.

Installation And Cylinder Fit For Drawer Projects

The 1-1/8 inch barrel length identifies this lock for drawer fronts and materials that suit that cylinder projection, helping installers match cylinder depth to typical cabinet construction. The body constructed from zinc die cast works with the mounting preparation in the drawer, while the solid brass cylinder handles the keyed function, so the installer aligns the cylinder through the face and seats the body behind it. The set screw cylinder release mechanism supports straightforward cylinder removal, so rekeying work follows a repeatable process during lock changes without altering the drawer prep. Using a Schlage C keyway format also helps align bore and hardware choices with other Schlage key-in-knob cylinders used in the same facility.

How This Olympus Drawer Lock Fits Real Work

Where The Olympus 800 Schlage C Drawer Lock Is Used

The Olympus Lock, Inc. 800 Schlage C keyway pin tumbler deadbolt drawer lock fits drawer applications where a deadbolt-style locking point is needed on furniture or cabinetry using Schlage C key systems. The manufacturer part number 800S-26D-102 identifies a satin chrome finish with keyed alike #102, so runs of drawers in offices, shops, or storage areas can share a common key. Because the lock can be keyed together with other Schlage C keyway locks, it suits projects where drawer security must integrate with door or cabinet locks already using that keyway. The non-handed standard function means the same lock model fits drawers on various cabinet layouts, so the same part number can serve multiple positions across a millwork package.

Why These Schlage C Keyway Details Matter On Site

The Schlage C keyway lets this drawer lock work within an existing Schlage C ecosystem, so facilities using that keyway can extend their key plan to drawers without introducing a different key pattern. The easily rekeyable design using a set screw cylinder release mechanism means cylinders can be swapped or rekeyed using a defined process, which keeps future key changes tied to the cylinder rather than the cabinet. The Grade 1 performance requirements rating under ANSI/BHMA A156.11 indicates the lock is built for demanding service, which supports use on drawers that experience regular access in commercial or institutional environments. The combination of a zinc die cast body and solid brass cylinder provides a two-part construction, where the body manages mounting stresses and the brass cylinder manages key engagement, supporting consistent operation over repeated uses. The ability to accept other manufacturer Schlage compatible key-in-knob cylinders gives locksmiths flexibility, because they can match cylinders from their preferred Schlage compatible sources while still using the Olympus 800 series housing.

Common Questions About This Schlage C Drawer Lock

Choose This Lock For Schlage C Drawer Systems

The Olympus Lock 800 Schlage C keyway pin tumbler deadbolt drawer lock aligns with Schlage C key systems, so drawers can be keyed alike #102 alongside other C keyway openings. With a 1-1/8 inch solid brass cylinder, zinc die cast body, Grade 1 performance requirements rating, satin chrome 26D finish, and easily rekeyable set screw cylinder release mechanism, it offers a focused solution for drawers that must coordinate with broader Schlage C key plans.