800 Schlage C Keyway Pin Tumbler Deadbolt Drawer Lock, Satin Chrome, Keyed to Alike #102, Cylinder Length 1-3/8"

Schlage C Keyway Deadbolt Drawer Lock For Secure Use

Schlage C keyway deadbolt drawer lock from Olympus Lock, Inc. is a pin tumbler deadbolt drawer lock in satin chrome designed for keyed control on drawers and similar applications. The 1-3/8 inch cylinder length provides extended reach through thicker drawer fronts, supporting secure deadbolt engagement in deeper cabinetry. The Schlage C keyway allows it to be keyed together with other Schlage C keyway locks, so multiple lock points can operate on the same key for streamlined access control on a project. The solid brass cylinder works with the zinc die cast body to create a robust lock body and operating core, supporting long-term keying performance while the body carries the structural load in the drawer. This standard function lock is non-handed, so it can be used on left or right side layouts without changing the lock body.

Deadbolt Drawer Lock Details That Support The Job

• The pin tumbler deadbolt design delivers positive bolt engagement in the drawer, giving a secure locking point that resists casual opening in typical cabinet use.
• The Schlage C keyway can be keyed together with other Schlage C keyway locks, allowing a keyed alike system across multiple drawers to simplify key control on site.
• The cylinder is easily rekeyable via a set screw cylinder release mechanism, so the locking system can be rekeyed in the field without replacing the entire lock body.
• This lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, indicating it is tested to a recognized performance standard for deadbolt locks in normal use conditions.
• The key is removable in the locked or unlocked position, which lets users remove the key after locking or during authorized open access without changing the lock state.
• The body is zinc die cast and the cylinder is solid brass, combining a strong housing with a durable cylinder construction for everyday drawer lock operation.

Drawer Deadbolt Lock Fit And Cylinder Setup

The 1-3/8 inch cylinder length on this Olympus 800 Schlage C keyway pin tumbler deadbolt drawer lock is sized for installations where a longer cylinder is needed to reach through the drawer front and into the cabinet framing. This drawer lock uses a set screw cylinder release mechanism, so the cylinder can be released for rekeying while the main lock body remains installed in the drawer construction. The non-handed standard function means the same lock body can be oriented either way within the drawer design, simplifying layout decisions during cabinet construction or retrofit work.

Using This Olympus Schlage C Drawer Lock In Work

Where This Schlage C Keyway Deadbolt Drawer Lock Fits

This 800 Schlage C keyway pin tumbler deadbolt drawer lock is positioned for drawer and similar cabinet applications that need keyed control using the Schlage C keyway. The 1-3/8 inch cylinder length supports use in drawers with thicker fronts where shorter cylinders may not reach the strike area, helping the deadbolt engage properly in the cabinet or strike component. Its satin chrome finish provides a neutral, professional look that pairs with other satin chrome hardware in commercial or residential millwork, aligning visually with Schlage C keyway systems already in place. The standard function, non-handed design allows the same lock to be used across a run of drawers, avoiding separate left and right hand part numbers.

The Schlage C keyway configuration is built to work in systems where Schlage C keyway locks are already specified, so drawers can share keying with other Schlage C keyway hardware on the project. This lock will accept other manufacturer Schlage compatible key-in-knob cylinders, giving the option to use a compatible cylinder when a keyed system calls for a specific Schlage compatible key-in-knob cylinder. The keyed to alike #102 setup means locks ordered with this configuration operate on the same #102 key numbers, which is useful when many drawers need controlled access under a single key code.

Details That Support Repeatable Rekeying And Setup

The easily rekeyable design using the set screw cylinder release mechanism allows the cylinder to be serviced or changed while the main deadbolt drawer lock body stays in place, saving effort when updating keying across a bank of cabinets. Passing ANSI/BHMA A156.11 Grade 1 performance requirements indicates the lock has been tested against a recognized Grade 1 performance threshold for deadbolt locks, giving confidence that the deadbolt drawer function is suited to demanding service in typical environments that call for that grade. The key removable in the locked or unlocked position detail means users can keep the key with them whether the drawer is secured or open, which can support controlled access routines.

The body constructed from zinc die cast provides a rigid base for mounting in the drawer, while the solid brass cylinder focuses strength on the keying components, combining structural and keying durability traits in the overall unit. Because this 800 Schlage C keyway drawer lock is keyed to alike #102, installers can deploy multiple locks under the same keying pattern whenever that #102 keying is specified, maintaining consistent access rules without custom rework on each drawer. The ability to accept other manufacturer Schlage compatible key-in-knob cylinders supports integration with broader Schlage compatible systems, so key control programs that rely on specific compatible cylinders can extend into deadbolt drawer locks.

Common Questions About This Schlage C Drawer Lock

Select This Lock For Schlage C Drawer Projects

This 800 Schlage C keyway pin tumbler deadbolt drawer lock from Olympus Lock, Inc. combines a 1-3/8 inch cylinder length, satin chrome finish, and keyed to alike #102 configuration to support Schlage C keyway drawer installations. Its easily rekeyable cylinder, non-handed function, and ANSI/BHMA A156.11 Grade 1 performance alignment make it suited to projects built around Schlage C keyway systems. Use this lock where drawer deadbolt security, consistent keying with other Schlage C keyway hardware, and future rekey flexibility are all part of the specification.