
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
DH Casters swivel caster is a plate mount caster designed for platform trucks, flatbed carts, containers, automotive equipment, distribution carts and warehouse equipment, so it supports common material-handling builds in shops and facilities. The 6 inch diameter gray TPR wheel provides a stable rolling surface that handles typical floor transitions while keeping the wheel profile compact for equipment design. A 2 inch tread width spreads the load over more floor area, which helps manage weight and track straighter under heavier loads. The 425 lb load capacity lets one caster carry substantial weight, so multi-caster layouts can support sizeable carts or equipment. A swivel design allows the caster to rotate freely, which helps maneuver trucks and carts precisely in tight aisles or around workstations. The plate mount setup ties directly into flat mounting plates on carts or equipment, giving installers a broad, sturdy mounting interface for repeated use.
This caster uses a plate mount with a plate size of 3-15/16 inch by 4-1/2 inch, so it pairs with flat mounting areas sized for that footprint on trucks, carts and equipment. The rectangular plate layout offers a stable mounting base, which helps spread loads into the cart frame and reduces stress at any single point. Since the caster is a plate mount type, it is suited to welding or bolting onto fabricated frames that already allow for that plate size, simplifying fabrication planning. The swivel configuration means the caster rotates around a kingpin, which lets installers position units at corners of carts to balance maneuverability and directional control. The wheel tread width of 2 inches and 6 inch diameter work together to support the rated 425 lb capacity, so mounting locations can be chosen knowing each caster handles significant load.
This caster is specified for platform trucks, so it suits projects moving sheet goods, bins or components across shop or warehouse floors. Its use on flatbed carts supports longer loads or bulkier items where stable rolling is important. Container applications benefit from the 425 lb capacity per caster, helping support dense stored materials or tooling when multiple casters share the load. Automotive equipment builds use this caster where vehicles, parts racks or service fixtures need controlled movement in bays. Distribution carts gain from the swivel design when routing through aisles and staging areas, since the caster rotation supports quick angle changes. Warehouse equipment such as picking carts or stock dollies align well with the 6 inch wheel diameter, which handles typical expansion joints and transitions between floor areas. Across these applications, the plate mount construction integrates into welded or fabricated frames that match the 3-15/16 inch by 4-1/2 inch plate size, so installers can standardize on a known footprint.
The swivel caster type allows carts and equipment to pivot around the caster center, which makes it easier to position loads beside machines, racks or docks. The gray TPR non-marking wheel keeps floors free from dark streaks during repeated moves, which supports maintenance of finished surfaces in production or front-of-house zones. A 6 inch diameter wheel combines low rolling resistance with a compact overall height, helping designers manage ergonomics while preserving under-deck clearances. The 2 inch tread width offers a balance between footprint and maneuverability, supporting the 425 lb rated capacity by spreading weight without creating excessive turning resistance. The plate size of 3-15/16 inch by 4-1/2 inch gives fabricators defined dimensions when laying out mounting pads on trucks, carts, containers or automotive fixtures, which helps maintain consistency across multiple builds. With a load capacity of 425 lb per caster, equipment designers can calculate total supported weight across caster sets, aligning the caster selection with real-world material loads and handling patterns.
The C-MHD6TPS caster uses a 6 inch diameter wheel with a 2 inch tread width, which balances load support and maneuverability for platform trucks, carts and similar equipment.
This swivel caster has a 425 lb load capacity, allowing equipment builders to support substantial weights when multiple casters are installed under a truck, cart or container frame.
This DH Casters swivel caster uses a plate mount design with a plate size of 3-15/16 inch by 4-1/2 inch, fitting flat mounting areas on trucks, carts and equipment frames.
The wheel is gray TPR and is described as non-marking, so it is suited to applications where floor appearance matters on platform trucks, carts and warehouse equipment.
This plate mounted caster is specified for platform trucks, flatbed carts, containers, automotive equipment, distribution carts and warehouse equipment, covering many material-handling builds.
This caster is a swivel type, so it rotates around a vertical axis, allowing carts, trucks and equipment to turn and maneuver in tighter spaces.
The C-MHD6TPS plate mount swivel caster from DH Casters combines a 6 inch diameter gray TPR non-marking wheel, 2 inch tread width and 425 lb load capacity to support demanding material-handling builds. Its specified applications - platform trucks, flatbed carts, containers, automotive equipment, distribution carts and warehouse equipment - give clear guidance on typical uses. The 3-15/16 inch by 4-1/2 inch plate size and swivel design align with standard cart and equipment layouts, helping installers match mounting points to real loads. Add this caster to projects that need controlled maneuvering, floor-friendly wheels and a defined plate footprint.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CCMHD6HDPR Mfr# C-MHD6HDPR | DH Casters Rigid Caster With 6" Wheel No Brake, Plate Mount 750lb Capacity - C-MHD6HDPR | ||||
Sold in: 1 Each | CCMHD6HDPS Mfr# C-MHD6HDPS | DH Casters Swivel Caster With 6" Wheel No Brake, Plate Mount 750lb Capacity - C-MHD6HDPS | ||||
Sold in: 1 Each | CCMHD6MRR Mfr# C-MHD6MRR | DH Casters Rigid Caster With 6" Moldon Rubber Wheel No Brake, Plate Mount 450lb Capacity - C-MHD6MRR | ||||
Sold in: 1 Each | CCMHD6MRS Mfr# C-MHD6MRS | DH Casters Swivel Caster With 6" Moldon Rubber Wheel No Brake, Plate Mount 450lb Capacity - C-MHD6MRS | ||||
Sold in: 1 Each | CCMHD6MRSB Mfr# C-MHD6MRSB | DH Casters Swivel Caster With 6" Moldon Rubber Wheel With Brake, Plate Mount 450lb Capacity - C-MHD6MRSB | ||||
Sold in: 1 Each | CCMHD6PNSB Mfr# C-MHD6PNSB | DH Casters Swivel Caster With 6" Wheel With Brake, Plate Mount 1000lb Capacity - C-MHD6PNSB | ||||
Sold in: 1 Each | CCMHD6TPR Mfr# C-MHD6TPR | DH Casters Rigid Caster With 6" Thermoplastic Wheel No Brake, Plate Mount 425lb Capacity - C-MHD6TPR |