15/16X1MM Hardrock Maple edgebanding is a Doellken Woodtape PVC edge banding designed to finish exposed panel edges in a Hardrock Maple look, so cabinet and furniture projects present a unified surface from face to edge. The 15/16 inch width gives coverage for typical 3/4 inch panels with a trim margin, so installers can flush-trim back to a clean line. The 1mm thickness provides a defined edge profile that stands up to everyday contact along cabinet doors, shelves, and casework fronts. The Hardrock Maple color identity aligns with projects using similar maple tones, supporting visual continuity across doors, drawer fronts, and carcass edges. Supplied as a 300 foot roll, this edgebanding supports longer production runs and repetitive shop work without frequent changeovers. The edge banding format fits standard edgebanding workflows, helping shops maintain consistent results job after job.
This PVC edge banding is identified as 15/16X1MM, so it is sized for applications where a 15/16 inch wide tape is used to cover panel edges, then trimmed flush. The 1mm thickness suits edge treatments where a noticeable, durable edge is preferred over ultra-thin tapes. As an Edgebanding, PVC product, it fits workflows that rely on standard PVC edgebanding equipment, helping maintain familiar feed, bond, and trim routines in the shop. The Hardrock Maple description signals use in maple-colored layouts, so the finished edges support a coordinated appearance along cabinet runs, furniture pieces, and built-ins using similar tones.
The Doellken Woodtape brand and Edgebanding & Surfacing classification position this 15/16X1MM Hardrock Maple edgebanding for woodworking environments focused on cabinetry and casework. The Hardrock Maple color identity makes it suitable for cabinet boxes, shelving, and furniture components that use Hardrock Maple or similar decorative surfaces, keeping edges visually aligned with panel faces. With a 300 foot roll, this product lends itself to production shops handling multiple pieces in the same finish, such as full kitchen layouts, banks of office cabinets, or matching residential built-ins. The PVC construction and place in the Edgebanding, PVC category connect it to jobs where a durable, easy-to-machine plastic edge is part of the specification. In these contexts, the 1mm thickness supplies a solid edge presence along doors, drawer fronts, and exposed carcass edges.
The specified 15/16 inch width gives installers margin beyond standard 3/4 inch panels, which supports consistent alignment and trimming without risking under-coverage along the edge. That extra width helps maintain clean reveals even when panels vary slightly within normal tolerances. The 1mm thickness adds enough material to form a defined edge profile, so trimming and scraping operations leave a solid, uniform edge rather than a fragile, ultra-thin layer. Identified as PVC edge banding, the material characteristics support steady cutting and trimming behavior, which matters when repeatable results across many cabinet parts are required. The 300 foot roll length also contributes to consistency, since long runs can be handled from a single roll, reducing transitions that might introduce small visual shifts from one batch to another.
This Doellken Woodtape PVC edge banding is identified as 15/16X1MM, providing a 15/16 inch width and 1mm thickness for covering typical panel edges and trimming to a clean, solid edge.
The Hardrock Maple designation aligns the edgebanding with Hardrock Maple projects, so cabinet boxes, shelves, and furniture pieces maintain color continuity from the surface through the finished edges.
The 300 foot roll length supports longer production runs, allowing shops to process many cabinet or furniture parts in Hardrock Maple without frequent roll changes, which supports steady throughput.
This product is categorized as Edgebanding, PVC, so it uses PVC material that fits workflows designed around PVC trimming, scraping, and finishing operations in cabinet shops.
The edge banding is from Doellken Woodtape, with Surteco USA Inc WT9375-40-8510 and manufacturer part number 8510-1540-300, which help match project specifications.
The 1mm thickness creates a noticeable, solid PVC edge, so trimmed cabinet and furniture panels show a defined profile that stands up to regular handling along doors and shelves.
The 15/16X1MM Hardrock Maple edgebanding from Doellken Woodtape provides a PVC edge solution that is sized, colored, and formatted for Hardrock Maple cabinet and furniture projects. With its 15/16 inch width, 1mm thickness, and 300 foot roll length, this edge banding supports efficient production and consistent visual results across matching components. For projects using Hardrock Maple tones where panel edges must align with decorative surfaces, this PVC edge banding delivers dimensions and color identity tailored to that role.
Sold In: 300 Lineal Ft