
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet defines a 30 inch wide by 12 inch high by 12 inch deep upper cabinet that fits standard wall layouts, so runs line up cleanly and give you predictable storage above counters or appliances. The cabinet uses frames built of solid 3/4 inch oak, maple, or beech, which creates a rigid front structure that holds doors and hardware securely over years of opening and closing. Each rail is kiln-dried before assembly, reducing movement in service so reveals stay more consistent after the job is complete. Rails are joined by mortise and tenon and then glued, forming a mechanical interlock that resists racking when the wall load changes. Solid wood corner blocks are glued and power nailed, tying sides to the frame for additional strength where installers often see stress in use.
Solid wood hanging strips on wall cabinets are located at the top and bottom, so installers have defined zones of solid stock to anchor into wall framing across the cabinet width. This construction helps the 30 inch wide by 12 inch deep cabinet sit securely on the wall plane without relying only on a few localized fastener points. The 3-ply end panels with a 1/2 inch thick engineered wood core and hardwood veneers deliver a stable side panel, which supports alignment when you clamp and fasten this cabinet to neighboring units in a run. Solid wood corner blocks, glued and power nailed, brace the box during handling and lifting, which is useful when setting the cabinet on ledger supports or jigs.
The Kitchen Kompact 30 inch wide by 12 inch high by 12 inch deep Glenwood wall cabinet suits upper rows where a shallow height is needed above windows, sinks, or appliances. The solid 3/4 inch oak, maple, or beech frame gives a traditional face-frame layout that pairs with other Kitchen Kompact cabinets in the same line, keeping rail and stile proportions consistent across the kitchen. End panels using 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers provide a finished side that can be exposed at the end of a run or against a transition panel. The recessed panel Glenwood style defines the appearance, so the cabinet matches Glenwood fronts defined by the manufacturer.
Each kiln-dried rail joined by mortise and tenon and then glued creates a face frame that stays more stable as indoor humidity changes, helping you hold consistent gaps between doors and neighboring cabinets after installation. Solid wood hanging strips on wall cabinets, located at the top and bottom, give two continuous fastening bands, which lets installers place fasteners where studs occur without working around voids. Solid wood corner blocks that are glued and power nailed stiffen the corners, so the box resists distortion when clamped side-to-side in long runs. End panels with 3-ply construction and a 1/2 inch thick engineered wood core with hardwood veneers combine surface appearance with an engineered core, which supports screw holding for typical cabinet-to-cabinet fastening. Solid wood toe kicks at 3/4 inch thickness, specified for the line, contribute to a consistent base alignment when this wall cabinet is coordinated with base units built to the same standard.
The Kitchen Kompact Glenwood GW30X12 wall cabinet is 30 inches wide, 12 inches high, and 12 inches deep, so it fits upper rows designed around these standard measurements.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, providing a substantial face frame that supports doors and typical hardware loads in kitchen use.
Each rail is kiln-dried and joined by mortise and tenon, then glued, creating a strong mechanical joint that helps keep the frame square once mounted.
The cabinet uses solid wood hanging strips on wall cabinets, located at the top and bottom, providing continuous solid zones for fastening into wall framing.
Solid wood corner blocks are glued and power nailed, reinforcing the joints so the cabinet box resists racking during handling and in service.
The end panels have 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, balancing stability with a hardwood outer surface.
The Kitchen Kompact Glenwood GW30X12 wall cabinet combines a 30 inch by 12 inch by 12 inch format with a solid 3/4 inch oak, maple, or beech frame, kiln-dried mortise and tenon rails, and 3-ply end panels. Solid wood hanging strips on wall cabinets, located at the top and bottom, and solid wood corner blocks that are glued and power nailed create a box suited to typical kitchen wall mounting. When a run calls for a Glenwood recessed panel upper in this size, this cabinet provides a consistent construction base for the layout.
Sold In: 1 Each