Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet defines a 36 inch wide, 12 inch high, 12 inch deep wall unit built for regular kitchen use. The cabinet belongs to the Kitchen Kompact line, so it ties into other Glenwood pieces on a job. The recessed panel design matches the Glenwood style, helping runs stay visually consistent. All frames use solid 3/4 inch oak, maple, or beech, giving the face frame the rigidity needed for daily door use. Each rail is kiln-dried before assembly, which stabilizes the wood and supports long-term alignment in normal kitchen conditions. Rails are joined with mortise and tenon construction and then glued, creating a tight mechanical joint that keeps the frame square under load. Solid wood corner blocks are both glued and power nailed, so the cabinet box resists racking when fastened on the wall.
This Kitchen Kompact wall cabinet uses solid wood hanging strips at the top and bottom of the cabinet back, giving clear fastening areas for wall installation. By running solid wood in these zones, the design helps fasteners bite into consistent material across the width of the cabinet. The 3/4 inch solid wood face frame adds stiffness across the front, so when the cabinet is pulled tight to the wall, the box stays square. Solid wood corner blocks, glued and power nailed, connect the frame and sides, allowing the cabinet to handle the clamping force of installation without distorting. End panels with a 1/2 inch engineered wood core keep the sides flat, supporting tight seams when this Glenwood 36x12 wall cabinet is ganged with adjacent units.
The Glenwood 36x12 wall cabinet size suits upper runs where a 36 inch span is needed above counters or workspaces. With a 12 inch depth, it aligns with standard wall cabinet depths in typical kitchen layouts. The 12 inch height makes this unit useful over areas where a low profile is preferred, such as above a window or appliance, while still tying into the broader Kitchen Kompact Glenwood line. All frames being solid 3/4 inch oak, maple, or beech means the visible front matches other pieces in the series built the same way. End panels with a 3-ply structure and hardwood veneers allow the exposed sides of this wall cabinet to finish cleanly alongside other Glenwood cabinets.
The frame construction of this GW36X12 wall cabinet relies on each rail being kiln-dried, which reduces internal stresses in the wood so the frame remains stable after installation. Mortise and tenon joints between the rails and stiles, reinforced with glue, produce a rigid rectangle that keeps door openings square, supporting smooth door operation on this Kitchen Kompact recessed panel cabinet. Solid wood corner blocks, both glued and power nailed, tie the frame to the sides, helping the cabinet resist racking forces when loaded with contents. Solid wood hanging strips at the top and bottom of wall and base cabinets create predictable fastening areas during layout, which supports straight, level runs across multiple Glenwood units. End panels built with a 1/2 inch engineered wood core and hardwood veneers keep the cabinet sides flat, which helps seams between this 36x12 wall cabinet and neighboring cabinets stay tight and visually aligned.
The Kitchen Kompact Glenwood wall cabinet is 36 inches wide, 12 inches high, and 12 inches deep, which suits typical upper cabinet runs needing a 36 inch span.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, giving the front structure strength for door mounting and everyday use in kitchen environments.
Each rail is kiln-dried, then joined by mortise and tenon and glued, creating a stable frame that holds its shape so doors stay aligned over time.
Solid wood corner blocks are glued and power nailed, tying the frame and sides together so the cabinet resists racking once mounted and loaded.
The wall cabinet uses solid wood hanging strips located at the top and bottom, offering solid fastening zones that spread mounting loads across the cabinet back.
End panels have 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, providing flat, stable sides suitable for exposed installations.
The Kitchen Kompact Glenwood 36 inch wide, 12 inch high, 12 inch deep wall cabinet combines solid 3/4 inch wood frames, kiln-dried mortise and tenon rails, solid wood corner blocks, and 3-ply end panels with hardwood veneers. Solid wood hanging strips at the top and bottom support dependable wall fastening. For projects built around the Kitchen Kompact Glenwood style, this recessed panel wall cabinet supplies a matching upper unit that carries the same construction approach across the run.
Sold In: 1 Each