Kitchen Kompact shelf kit is identified as the SK18BRB universal shelf kit, so installers can match it directly to Kitchen Kompact base and wall cabinet layouts that call for this specific part number. The product name defines it as an 18 inch wide by 34-1/2 inch high by 24 inch deep shelf kit, which aligns with a typical 18 inch cabinet footprint and gives you a clear sense of the internal span you are working with during layout. The product is classified under Kitchen Kompact cabinets and cabinet accessories, indicating it is designed to integrate with the same construction approach as Kitchen Kompact cabinet frames and supports. This alignment helps keep materials, profiles, and assembly logic consistent across a run, which simplifies planning and jobsite organization when you are building out a bank of cabinets or adding storage to an existing Kitchen Kompact installation.
The use of solid 3/4 inch oak, maple, or beech for all frames means the load paths around this shelf kit tie into hardwood members, which responds well to normal cabinet forces during opening, closing, and storage. Kiln-dried rails joined with mortise and tenon and glue establish a stable geometry at each connection, so alignment set during installation is supported by joints designed for cabinet framing. Solid wood corner blocks that are glued and power nailed help keep the case square under torsion, which is valuable when the shelf kit is integrated into a run where faces and reveals must track straight. Solid wood hanging strips placed at the top and bottom of wall and base cabinets create predictable points where the cabinet interacts with supporting structure, so the installed assembly can share similar load transfer behavior along the run. The 3-ply end panel design with a 1/2 inch engineered wood core and hardwood veneers gives a stable side element that works with the frame during fastening and alignment.
The Kitchen Kompact 18 inch W x 34-1/2 inch H x 24 inch D shelf kit is positioned for use with cabinet layouts that match those dimensions, giving installers a defined vertical and horizontal footprint when tying the kit into a base run. Because the frames are built of solid 3/4 inch oak, maple, or beech, the kit integrates into cabinet assemblies that rely on hardwood framing members, supporting consistent material behavior across adjacent units. The solid wood toe kicks, also 3/4 inch thick, align this kit with cabinet bases that carry vertical loads down to the floor through a wood structure, which is important when the shelf area will see routine loading in a kitchen environment. End panels built with a 3-ply, 1/2 inch engineered wood core and hardwood veneers provide sides that relate directly to the same construction method used in matching cabinet components, supporting a uniform appearance and structural response along the line.
Each rail in this Kitchen Kompact shelf kit is kiln-dried and joined by mortise and tenon, then glued, which creates tight, repeatable joints that help the cabinet case retain alignment after installation. Solid wood corner blocks that are glued and power nailed reinforce corners where racking forces occur, so the rectangular geometry you establish while setting the unit is backed by structural connections at each corner. Solid wood hanging strips positioned at the top and bottom of wall and base cabinets define consistent zones for structural connection, which supports a repeatable approach when positioning multiple Kitchen Kompact cabinet accessories along a wall. The 3-ply end panel design with a 1/2 inch engineered wood core and hardwood veneers gives the sides a balanced structure that works with the rails and corner blocks to hold alignment when fastened into a run. Together, these construction details support a workflow where measurement, leveling, and reveals can be carried from one unit to the next with predictable behavior.
The Kitchen Kompact SK18BRB shelf kit is identified as 18 inches wide, 34-1/2 inches high, and 24 inches deep, which aligns with a typical 18 inch cabinet footprint during layout.
The Kitchen Kompact shelf kit frame uses solid 3/4 inch oak, maple, or beech, providing a hardwood structure that matches the construction used in Kitchen Kompact cabinet framing.
The Kitchen Kompact shelf kit rails are kiln-dried, joined by mortise and tenon, and then glued, creating stable joints that help the cabinet structure hold alignment.
The Kitchen Kompact frame uses solid wood corner blocks that are glued and power nailed, reinforcing corners against racking in everyday cabinet use.
Kitchen Kompact wall and base cabinets use solid wood hanging strips at the top and bottom, creating defined structural connection points to the supporting structure.
The Kitchen Kompact shelf kit uses end panels with 3-ply construction, a 1/2 inch thick engineered wood core, and hardwood veneers, giving the sides a balanced structure.
The Kitchen Kompact shelf kit, referenced by manufacturer part number SK18BRB and described as a universal shelf kit, gives you a defined 18 inch W x 34-1/2 inch H x 24 inch D footprint that aligns with Kitchen Kompact cabinet sizing. Solid 3/4 inch oak, maple, or beech frames, kiln-dried mortise and tenon rails, solid wood corner blocks, and 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers all reflect the construction approach used across Kitchen Kompact cabinets. For installers and shop teams building or extending Kitchen Kompact cabinet runs, this matching structure supports consistent behavior and appearance from one unit to the next.
Sold In: 1 Each