Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet gives you a 30 inch wide, 18 inch high, 12 inch deep storage unit that mounts above the work zone and keeps contents at eye level, helping organize wall space in a standard kitchen run. The cabinet uses a recessed panel Glenwood door style, so the face presents a framed look that lines up with other Glenwood pieces in the same room. All frames are built of solid 3/4 inch oak, maple, or beech, so the front structure holds hinges and doors in dense hardwood instead of soft material, which helps doors stay aligned under everyday use. The solid frame construction also supports repeated opening and closing without the face loosening from the case, which matters on wall cabinets that carry frequent door cycles.
Solid wood hanging strips on wall cabinets, located at the top and bottom, provide dedicated structural members for mounting, so fasteners can pass through solid wood rather than only panel stock. That construction helps transfer cabinet load into the wall more directly, which is important on a 30 inch wide cabinet that may hold heavier kitchen items. Each rail is kiln-dried, joined by mortise and tenon, and glued, so when you clamp or screw the cabinet during install, the face frame joints stay tight instead of opening at the corners. Solid wood corner blocks that are glued and power nailed link the frame and case, helping the cabinet stay square as you level and align it with neighboring units.
The Kitchen Kompact 30 inch wide x 18 inch high x 12 inch deep Glenwood wall cabinet fits upper runs where a shallower height is needed above appliances, sinks, or work areas. The recessed panel Glenwood door style pairs with other Kitchen Kompact Glenwood cabinets, so this size can be combined with taller or shorter units while keeping the same face design. End panels with 3 ply construction and a 1/2 inch thick engineered wood core with hardwood veneers create stable sides that align cleanly when you gang this cabinet next to another cabinet, which helps runs look straight. Solid wood toe kicks within the line allow matching base cabinets to share visual details with this wall cabinet, keeping design consistent from floor to wall.
All frames are built of solid 3/4 inch oak, maple, or beech, so every hinge and latch point is backed by hardwood, giving you a predictable surface when boring for hardware and reducing the chance of fasteners stripping during adjustments. Each rail is kiln-dried, joined by mortise and tenon, and glued, which helps the frame stay square after you clamp wall cabinets together, allowing you to pull tight seams without telegraphing stress into the joints. Solid wood corner blocks that are glued and power nailed tie the frame to the cabinet box, so when loads are placed on shelves, the forces travel into reinforced corners instead of stressing a single panel. Solid wood hanging strips at the top and bottom of wall cabinets create two mounting zones, which helps you span different stud layouts while still fastening through solid stock. End panels with 3 ply construction and a 1/2 inch thick engineered wood core with hardwood veneers resist minor humidity changes better than solid boards, which helps door gaps stay more consistent across a full run.
The Kitchen Kompact Glenwood wall cabinet measures 30 inches wide, 18 inches high, and 12 inches deep, providing a low upper cabinet profile that works above workspaces or appliances.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, giving hinge and door hardware a dense hardwood base that supports repeated use.
Each rail is kiln-dried, joined by mortise and tenon, and glued, creating tight joints that resist racking when the wall cabinet is fastened and aligned in a run.
The solid wood hanging strips at the top and bottom give defined structural zones for mounting, so fasteners pass through solid stock for stronger wall attachment.
Solid wood corner blocks are glued and power nailed, tying the frame to the case so the cabinet keeps its square shape during handling and mounting.
End panels use 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing stable cabinet sides with a hardwood surface.
The Kitchen Kompact Glenwood wall cabinet GW30Y combines a 30 inch wide, 18 inch high, 12 inch deep format with a solid 3/4 inch hardwood frame, so it supports door hardware and daily use in a compact upper cabinet size. Mortise and tenon, kiln-dried, glued rails work with solid wood corner blocks to keep the box square as you tie units together in a run. Solid wood hanging strips at the top and bottom of the wall cabinet give clear mounting zones into structure, which supports load transfer into the wall. For projects using the Glenwood recessed panel look, this cabinet adds a shorter upper size built on the same solid frame and 3 ply hardwood-veneered end panel construction.
Sold In: 1 Each