Kitchen Kompact Glenwood wall cabinet provides a 36 inch wide, 15 inch high, 12 inch deep wall unit that fits standard upper cabinet runs where this footprint is needed. The Glenwood recessed panel style defines the door look, helping align this cabinet with projects already using that profile. The cabinet is part of the Kitchen Kompact product class, so it integrates into Glenwood layouts that repeat this line across the room. The manufacturer part number GW36X identifies this specific 36 inch Glenwood wall size, helping installers match it accurately to drawings and order lists. The GLENWOOD 36X SAP description ties into system records, which matters when coordinating multiple cabinets on larger jobs. The 36 inch span suits runs over common base cabinet combinations, supporting layouts where a single wider wall unit is preferred over multiple narrower boxes.
The solid wood hanging strips on this Kitchen Kompact Glenwood wall cabinet run across the top and bottom at the back, presenting consistent fastening areas for mounting. These strips let installers drive screws into solid wood along the cabinet span, which helps draw the cabinet flush to studs and maintain contact across the 36 inch width. The solid 3/4 inch face frame works with these hanging strips when clamping and ganging cabinets, keeping the front edge straight so doors line up across adjoining units. Solid wood corner blocks support the cabinet box as it is lifted and positioned, helping it stay square as it is set to layout lines. The 12 inch depth matches common upper cabinet depth, which matters when aligning this GW36X with neighboring wall cabinets in a continuous run.
This Kitchen Kompact Glenwood 36 inch wall cabinet fits upper wall positions that call for a 36 inch span at 15 inch height and 12 inch depth, matching its stated size. The recessed panel Glenwood design supports installations where that door style is specified throughout the kitchen, so the GW36X can drop into layouts without design changes. Solid wood hanging strips across the back of the cabinet align with typical stud spacing, which is useful on wall runs where multiple cabinets are tied together and backed by framing. The 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers give stable side walls that suit ends exposed to view, such as at a run termination or beside an opening. Solid wood corner blocks strengthen these corners, supporting the cabinet when it is placed over appliances or work areas needing a stable overhead unit.
The solid 3/4 inch frames built from oak, maple, or beech create a firm front reference, so doors and adjacent cabinets meet along a solid edge that resists flexing during everyday operation. Mortise and tenon joints at each kiln-dried rail, glued for added strength, provide a precise, locked connection that stays tight after the cabinet is fastened in place, helping maintain consistent reveals across a run. Solid wood hanging strips positioned at both the top and bottom of wall and base cabinets support repeatable mounting locations, which streamlines layout on jobs using multiple Kitchen Kompact Glenwood units. The 3 ply 1/2 inch engineered wood core end panels with hardwood veneers combine a dimensionally stable core with a hardwood face, which matters when installing cabinets in environments where temperature and humidity can vary. Solid wood toe kicks on matching base cabinets carry the same solid approach, helping create a coordinated installation where upper and lower Glenwood cabinets share structural themes.
The Kitchen Kompact Glenwood GW36X wall cabinet is 36 inches wide, 15 inches high, and 12 inches deep, so it fits upper cabinet runs designed around that footprint.
The cabinet frame is solid 3/4 inch oak, maple, or beech, with kiln-dried rails joined by mortise and tenon and glued, giving a rigid face for door and run alignment.
Solid wood hanging strips at the top and bottom of the wall cabinet back provide consistent fastening zones, so the cabinet can be drawn tight to studs across its width.
End panels with 3 ply construction and a 1/2 inch engineered wood core with hardwood veneers combine stability and a hardwood surface for visible cabinet ends.
Solid wood corner blocks, glued and power nailed, tie the cabinet box together, helping it stay square during handling and once fastened in a wall run.
Solid wood toe kicks on base cabinets and matching construction details allow this Glenwood wall cabinet to align visually and structurally in Kitchen Kompact installations.
The Kitchen Kompact Glenwood 36 inch wall cabinet GW36X combines a solid 3/4 inch hardwood frame with mortise and tenon joints, 3 ply end panels, and solid wood hanging strips across the back. These details support layout accuracy, stable mounting, and alignment with other Kitchen Kompact Glenwood units using the same construction approach. For projects built around this recessed panel Glenwood style and these dimensions, this wall cabinet provides a defined 36 x 15 x 12 component that fits into coordinated upper cabinet runs.
Sold In: 1 Each