Kitchen Kompact Glenwood wall cabinet GW33X is a 33 inch wide, 15 inch high, 12 inch deep upper cabinet designed for standard kitchen wall layouts. The cabinet uses a solid 3/4 inch wood frame in oak, maple, or beech, which provides a rigid front structure that resists racking during handling and mounting. Each frame rail is kiln-dried, then joined with a mortise and tenon joint, so the rail connections stay tight under normal kitchen use. The joints are glued, adding bond strength that helps the frame stay square over time. Solid wood corner blocks are glued and power nailed, tying cabinet sides to the front and providing extra mechanical strength at stress points. Solid wood toe kicks are 3/4 inch thick, creating a sturdy base detail where this cabinet is paired with matching base units in the same line.
The Glenwood 33 inch wall cabinet uses solid wood hanging strips at both the top and bottom of the cabinet, so installers have substantial material for fasteners across the width of the unit. These strips create a predictable fastening zone that helps align the cabinet with adjacent units along a layout line. The solid 3/4 inch face frame provides a straight reference edge at the front, which is important when aligning doors and setting gaps relative to neighboring cabinets. Solid wood corner blocks add stiffness to the box, so the cabinet remains square against the wall while fasteners are driven through the hanging strips. The 3 ply end panels with an engineered wood core and hardwood veneers keep the sides stable, which supports consistent reveals where this cabinet meets adjoining pieces.
The GW33X Glenwood 33 inch wall cabinet is sized at 33 inches wide, 15 inches high, and 12 inches deep, so it coordinates with standard upper cabinet runs that require a 33 inch span over counters or appliances. The solid wood hanging strips at the top and bottom support mounting into wall framing across that full width, which helps when tying multiple cabinets together in a straight line. The 3/4 inch solid wood frame in oak, maple, or beech presents a stable front edge that lines up with adjacent Kitchen Kompact cabinets of the same series. End panels using a 3 ply, 1/2 inch thick engineered wood core with hardwood veneers allow the sides to perform as structural members while still presenting a hardwood surface, which is useful on exposed ends in a visible run. Solid wood toe kicks in the Glenwood line mirror the material approach, so wall and base cabinets can share a consistent construction theme in one installation.
Each frame rail on the Glenwood wall cabinet is kiln-dried and joined with a mortise and tenon joint, which creates a precise, interlocking connection that helps keep the opening square as loads are added over time. The added glue at these joints enhances the long-term integrity of the frame, reducing the tendency for loosening that could affect door fit. Solid wood corner blocks that are glued and power nailed tie the frame and cabinet sides, lending torsional strength that helps the cabinet resist racking when units are clamped together in a run. The 3 ply end panel design with a 1/2 inch engineered wood core supports dimensional stability, so side panels stay flatter across normal humidity swings, which contributes to straighter seams where cabinets meet. Solid wood hanging strips on both the upper and lower portions of the back give installers two strong fastening bands, supporting even load distribution when the cabinet is loaded during everyday use.
The GW33X Glenwood 33 inch wall cabinet measures 33 inches wide, 15 inches high, and 12 inches deep, which matches typical upper cabinet proportions in many kitchen wall runs.
The Glenwood wall cabinet face frame is built from solid 3/4 inch oak, maple, or beech, providing a hardwood structure that supports a stable front opening for doors and trim.
Each frame rail is kiln-dried and joined with a mortise and tenon joint, then glued, creating a tight mechanical and bonded connection that helps maintain frame squareness under load.
The Glenwood wall cabinet uses solid wood hanging strips at the top and bottom, giving substantial fastening areas that spread mounting loads across the cabinet width.
Cabinet corners use solid wood corner blocks that are glued and power nailed, tying the sides and frame together to improve box strength against racking forces.
End panels use 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, combining stability from the core with a hardwood surface for exposed cabinet sides.
The Kitchen Kompact Glenwood 33 inch wall cabinet GW33X combines a solid 3/4 inch hardwood face frame with kiln-dried, mortise and tenon joined rails to support stable door openings. Solid wood hanging strips at the top and bottom give defined fastening zones for wall mounting across the full 33 inch width. Solid wood corner blocks and 3 ply, 1/2 inch thick end panels with hardwood veneers work together to keep the cabinet box square in normal kitchen conditions. For projects using Glenwood components, this 33x15x12 wall cabinet size aligns with standard upper runs where a 33 inch segment is required.
Sold In: 1 Each