Kitchen Kompact Glenwood drawer base cabinet GW24D is a 24 inch wide, 34-1/2 inch high, 24 inch deep base unit built for kitchen layouts that need a defined drawer base position in the run. The cabinet is built with frames of solid 3/4 inch oak, maple, or beech, so the front structure supports daily drawer use in a busy kitchen environment. Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating tight joints that help the frame resist racking during installation and long-term use. Solid wood corner blocks are glued and power nailed, which ties the frame and sides together for added stability when the cabinet is set, leveled, and loaded. Solid wood toe kicks, 3/4 inch thick, give a firm base contact surface to support typical kitchen floor installation conditions.
This Kitchen Kompact 24 inch base cabinet measures 24 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits common kitchen base layouts that follow standard counter height and depth. The solid wood toe kick at 3/4 inch thick helps set the working height once the cabinet is leveled and ready for countertop. Solid wood hanging strips on this base cabinet are located at the top and bottom, giving defined fastening lines when tying the unit into wall framing or neighboring cabinets. End panels with 3-ply, 1/2 inch engineered wood core and hardwood veneers provide a consistent side thickness, which supports flush alignment in straight runs or corners.
The Kitchen Kompact Glenwood 24 inch drawer base slots into layouts that call for a 24 inch wide base position with a recessed panel style. With a height of 34-1/2 inches and a depth of 24 inches, it matches common kitchen base standards, so it can be used under typical countertops. Solid wood toe kicks, 3/4 inch thick, sit at the floor and carry the cabinet load, which supports placing this unit in runs that carry standard base storage and countertop weight. Solid wood hanging strips located at the top and bottom of the base cabinet create a stable connection line when tying the cabinet into wall studs, neighboring cabinets, or support framing in a typical kitchen layout.
Frames built of solid 3/4 inch oak, maple, or beech give the Glenwood GW24D a rigid face frame, which helps keep drawer openings square and supports smooth hardware alignment. Each kiln-dried rail joined by mortise and tenon and glued forms tight joints, so the frame stays true during clamping, fastening, and countertop setting. Solid wood corner blocks that are glued and power nailed brace the junction between frame, sides, and bottom, which reduces movement when the base is shimmed into level on an uneven floor. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers provide a stable side structure, so the cabinet sides stay flat when clamped against adjacent units in a run.
The Glenwood GW24D drawer base measures 24 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard kitchen base cabinet footprints under typical countertops.
The frame uses solid 3/4 inch oak, maple, or beech, which gives the front structure strength for everyday drawer operation and helps the cabinet withstand normal installation handling.
The frame rails are kiln-dried, joined by mortise and tenon, and glued, creating tight, strong joints that help keep the cabinet face square during installation and long-term use.
The end panels have 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing stable sides with a hardwood veneer surface for finished ends.
The solid wood toe kicks are 3/4 inch thick, giving a firm contact surface at the floor that supports leveling and carrying the cabinet and countertop load in standard kitchen conditions.
The base cabinet has solid wood hanging strips located at the top and bottom, providing defined fastening zones when securing the cabinet to framing or adjacent units.
The Kitchen Kompact Glenwood 24 inch by 34-1/2 inch by 24 inch drawer base combines a solid 3/4 inch oak, maple, or beech frame with kiln-dried, mortise-and-tenon-glued rails and solid wood corner blocks, toe kicks, and hanging strips. This construction pairs with 3-ply, 1/2 inch engineered wood core end panels with hardwood veneers to support standard kitchen base layouts. For projects using Kitchen Kompact Glenwood recessed panel styling, this GW24D drawer base provides a defined 24 inch base location ready to integrate into straight runs or more complex layouts.
Sold In: 1 Each