Kitchen Kompact Glenwood drawer base is an 18 inch wide, 34-1/2 inch high, 24 inch deep drawer base cabinet that provides a defined footprint for kitchen layouts where precise base dimensions keep runs straight and appliances aligned. The Glenwood drawer base uses a recessed panel style, so it matches Glenwood recessed panel runs without mixing door designs on the same wall. This cabinet is part of the Kitchen Kompact product class and carries manufacturer part number GW18D, which ties directly to Glenwood 18D specifications when organizing orders or matching drawings. All frames are built of solid 3/4 inch oak, maple, or beech, giving the cabinet a solid wood front structure that resists racking when loaded. Solid wood hanging strips are used on base cabinets, located at the top and bottom, so installers have defined anchoring points across the cabinet back.
This Kitchen Kompact 18 inch wide by 34-1/2 inch high by 24 inch deep Glenwood drawer base sets standard base cabinet height and depth, allowing it to line up with common countertop depths and toe spaces. The solid wood hanging strips at the top and bottom of the base cabinet back give fixed fastening zones that run across the width, so fasteners can be placed where studs fall while still pulling the cabinet body flush. Solid wood toe kicks at 3/4 inch thickness let the front edge sit firmly on shims along uneven floors without crushing, helping maintain level across cabinet runs. End panels with a 1/2 inch thick engineered wood core and hardwood veneers keep the side walls dimensionally consistent, which is useful when scribing to a wall or fitting tight between adjacent cabinets and panels.
The Kitchen Kompact GW18D cabinet is a Glenwood 18 inch wide drawer base that fits into base runs where an 18 inch module is needed between other cabinets or near an appliance opening. At 34-1/2 inches high, this base sets the foundation height for finished counters that build from that dimension with typical top thicknesses. The 24 inch depth matches standard base depth, so the front frame aligns with neighboring units designed to the same depth for a consistent front plane. All frames built of solid 3/4 inch oak, maple, or beech give a hardwood face structure suited to typical kitchen environments, where doors and drawers are opened frequently and benefit from a stable frame. End panels using a 1/2 inch thick engineered wood core with hardwood veneers let the cabinet side handle normal kitchen humidity while keeping a hardwood surface ready for finished ends or tight joints.
Each rail on this Glenwood 18D frame is kiln-dried, joined by mortise and tenon, and then glued, so the joints hold square, supporting repeatable installation when cabinets are ganged in a straight line. Solid wood corner blocks that are glued and power nailed secure the junction between frame and sides, helping the cabinet stay square after handling and during fastening to the wall or to adjacent units. Solid wood toe kicks at 3/4 inch thickness give a robust lower front edge, which helps maintain level across the run after shimming and limits deflection under normal base cabinet loads. Solid wood hanging strips on base cabinets at both top and bottom provide reliable fastening zones, allowing multiple fastening points to pull the back tight without crushing. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers balance stability with a hardwood face, supporting consistent scribing, panel alignment, and finished-end appearance across a bank of cabinets.
The Glenwood 18D drawer base measures 18 inches wide, 34-1/2 inches high, and 24 inches deep, so it aligns with standard base cabinet height and depth in typical kitchen layouts.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech with kiln-dried rails joined by mortise and tenon and glued, which supports a square, rigid opening for doors and drawers.
The cabinet uses solid wood corner blocks that are glued and power nailed, tying the frame to the sides so the box stays square under normal loading and during fastening.
Solid wood hanging strips on base cabinets at the top and bottom provide continuous fastening zones at the back, allowing the cabinet to be pulled tight and straight to wall studs.
The end panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, which provides dimensional stability with a hardwood surface for exposed ends.
The drawer base has solid wood toe kicks that are 3/4 inch thick, giving a sturdy lower front edge that supports shimming and typical base cabinet loading at floor level.
The Kitchen Kompact Glenwood 18D drawer base offers an 18 inch wide, 34-1/2 inch high, 24 inch deep cabinet built around a solid 3/4 inch hardwood frame, so it drops into standard base layouts. With kiln-dried, mortise-and-tenon-glued rails, solid wood corner blocks, and 3/4 inch solid wood toe kicks, the box is constructed to stay square under typical kitchen use. Solid wood hanging strips at the top and bottom and 3-ply end panels with a 1/2 inch thick engineered wood core and hardwood veneers support straightforward fastening and side finishing when lining up multiple Glenwood cabinets in a run.
Sold In: 1 Each