Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood vanity sink base gives you a 30 inch wide, 34-1/2 inch high, 21 inch deep cabinet sized for a standard vanity layout, so installers can plan runs and plumbing clearances around known dimensions. The cabinet uses a recessed panel Glenwood door style, which provides a defined frame detail that aligns with other Glenwood cabinets on the same job. All frames are built of solid 3/4 inch oak, maple or beech, creating a rigid front structure that holds hinges and doors under daily use. Each rail is kiln-dried, which stabilizes the wood and reduces movement in normal bathroom environments. Rails are joined by mortise and tenon and then glued for added strength, so the joints resist racking when the cabinet is moved, set, and leveled. Solid wood corner blocks are glued and power nailed, tying the frame into the case for added stiffness at the front corners.
The 30 inch width, 34-1/2 inch height, and 21 inch depth give this Glenwood vanity sink base a predictable footprint, so rough plumbing and adjacent cabinets can be laid out to match. All frames are built of solid 3/4 inch oak, maple or beech, which gives fasteners a strong bite during installation and adjustment. Solid wood hanging strips on base cabinets, located at the top and bottom, create reliable fastening lines into studs along the back. Solid wood corner blocks are glued and power nailed, helping the box hold square while being clamped, shimmed, or pulled to a wall. Solid wood toe kicks at 3/4 inch thick establish a solid lower edge that works well with bases, flooring transitions, and applied trim pieces.
This Kitchen Kompact Glenwood vanity sink base is sized at 30 inches wide, 34-1/2 inches high, and 21 inches deep, fitting typical single-bowl vanity layouts where space is limited but a full-height cabinet is needed. The recessed panel Glenwood design matches other Kitchen Kompact Glenwood cabinets in the same project, helping maintain a consistent look between bath and other areas using the line. All frames are built of solid 3/4 inch oak, maple or beech, which supports mounting bathroom sink doors and hardware directly into solid wood. End panels consist of 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, so side surfaces resist warping while giving a hardwood face for exposed ends or tight clearances next to walls.
Each frame rail on this Glenwood vanity sink base is kiln-dried, joined by mortise and tenon, and then glued, producing joints that stay tight so doors hang true and reveals remain consistent after installation. Solid wood corner blocks are glued and power nailed, which helps the cabinet stay square when fastened through the face frame or hanging strips. Solid wood toe kicks at 3/4 inch thickness supply a strong lower band that accepts light contact and trim without flexing. Solid wood hanging strips on base cabinets, located at the top and bottom, give installers two continuous fastening points into studs, which supports a secure mount across the cabinet width. End panels using a 3-ply, 1/2 inch thick engineered wood core with hardwood veneers combine a stable core with hardwood faces, supporting clean scribing and a finished appearance on visible ends.
The Kitchen Kompact Glenwood vanity sink base measures 30 inches wide, 34-1/2 inches high, and 21 inches deep, so it matches a standard vanity footprint in many bathroom layouts.
The Glenwood vanity sink base frame is built of solid 3/4 inch oak, maple or beech, providing solid wood for fastening hinges and maintaining door alignment during regular use.
The frame rails are kiln-dried, joined by mortise and tenon, and then glued, creating strong, stable joints that help keep the cabinet square through handling and installation.
End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving a stable side panel with a hardwood surface suitable for exposed ends.
Solid wood hanging strips on base cabinets, located at the top and bottom, supply continuous solid backing so installers can fasten the cabinet securely along both upper and lower edges.
The 3/4 inch thick solid wood toe kicks form a sturdy lower front that handles everyday contact and supports trim or scribe work at floor level.
The Kitchen Kompact Glenwood vanity sink base in the GWV30ST configuration combines a 30 inch by 34-1/2 inch by 21 inch cabinet size with solid wood frame construction for bathroom projects. All frames are built of solid 3/4 inch oak, maple or beech, and the rails are kiln-dried, mortise and tenon joined, and glued, so the cabinet structure supports doors, hardware, and daily operation. Solid wood hanging strips on base cabinets, located at the top and bottom, and 3/4 inch thick solid wood toe kicks give practical mounting and finishing surfaces during installation. For jobs using Kitchen Kompact Glenwood styling, this vanity sink base provides a matching recessed panel piece sized for common single vanity runs.
Sold In: 1 Each