Kitchen Kompact Glenwood vanity sink base GWV36ST is a 36 inch wide, 34-1/2 inch high, 21 inch deep vanity sink base cabinet that provides a sized shell for a sink installation, which helps align plumbing layout with a standard bath vanity footprint. The recessed panel Glenwood style defines the door appearance, so the cabinet coordinates with other Glenwood units in the run. The cabinet belongs to the Kitchen Kompact cabinet line, so it follows a consistent construction approach across matching pieces. The solid frame construction supports daily door and drawer operation, which helps the unit hold up under repeated bathroom use. As a base cabinet, it supplies structural support under the sink area, which matters when tying together countertop, bowl, and wall connections into one stable assembly.
The vanity sink base measures 36 inches wide, which sets centerlines and filler needs when planning between walls or matching existing footprints. The 34-1/2 inch case height positions the top edge to work with standard countertop heights, so finished surfaces align with other bath fixtures. The 21 inch depth defines front-to-back projection, which impacts door swing clearance and walkway spacing in tight bathrooms. The solid 3/4 inch frame material gives the front opening firm edges, helping the sink cutout and plumbing route sit within a stable perimeter. The 3/4 inch solid wood toe kick establishes a strong lower face that accepts field finishing or trim while supporting the cabinet body.
This Glenwood V36ST vanity sink base fits bathroom layouts needing a 36 inch wide sink base with a recessed panel style that matches Kitchen Kompact Glenwood cabinetry. The 34-1/2 inch height and 21 inch depth align with common vanity dimensions, so the unit harmonizes with standard bath layouts and adjoining cabinets. Solid wood hanging strips at the top and bottom of the base give defined zones that accept fasteners into wall framing or neighboring cabinets, which supports a continuous, level run. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers keep cabinet sides stable while presenting hardwood faces, so exposed ends visually match the Glenwood design. Solid wood corner blocks locked by glue and power nails hold the box together during transport and setting, which supports maintaining squareness as the cabinet is moved into tight bath spaces.
The solid 3/4 inch oak, maple, or beech frame provides a strong front structure that carries door loads and hardware stresses, so hinge mounting points sit in solid material for dependable operation. Kiln-dried rails joined with mortise and tenon and then glued form tight, reinforced corners in the frame, limiting seasonal movement that could affect reveals or hinge alignment. Solid wood hanging strips on this base cabinet, placed at the top and bottom, create predictable fastening bands that help installers drive fasteners into solid stock, supporting a straight, rigid installation line across multiple cabinets. The 3/4 inch solid wood toe kick reinforces the base contact area, so the cabinet body rests on durable wood at the bottom front edge, helping resist damage when adjusting shims or trimming finish materials. The 3-ply 1/2 inch end panel core with hardwood veneers makes the side panels resistant to warping while presenting hardwood faces for visible surfaces, supporting clean lines along the cabinet side in finished bathrooms.
The Kitchen Kompact Glenwood vanity sink base GWV36ST is 36 inches wide, 34-1/2 inches high, and 21 inches deep, which matches common vanity sizing for coordinating countertop and plumbing layouts.
The Glenwood V36ST vanity cabinet uses a solid 3/4 inch oak, maple, or beech frame with kiln-dried rails joined by mortise and tenon and glued, which creates a rigid front that supports doors and hardware alignment.
The cabinet end panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, which stabilizes the sides and provides hardwood faces for visible or semi-exposed ends.
The vanity sink base uses 3/4 inch thick solid wood toe kicks, which form a sturdy lower front section to carry floor contact and cabinet load.
The GWV36ST cabinet uses solid wood corner blocks that are glued and power nailed, tying the corners together so the box stays square during handling and installation.
This Kitchen Kompact vanity sink base has solid wood hanging strips at the top and bottom, which provide strong fastening zones for securing the cabinet in place.
The Kitchen Kompact Glenwood vanity sink base GWV36ST delivers a 36 inch wide, 34-1/2 inch high, 21 inch deep cabinet built around a solid 3/4 inch hardwood frame, so it suits projects needing standard vanity dimensions with Glenwood styling. Kiln-dried, mortise-and-tenon frame rails, solid wood corner blocks, and 3/4 inch solid wood toe kicks combine to create a rigid cabinet structure that supports countertop and sink loads in typical bathroom conditions. Solid wood hanging strips and 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers provide stable mounting and finished sides, so the unit integrates smoothly into Glenwood bath runs.
Sold In: 1 Each