Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood base cabinet is a 36 inch wide, 34-1/2 inch high, 24 inch deep base cabinet built for kitchen runs that need consistent sizing. The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch oak, creating a solid joint at each corner, which helps the doors stay square during everyday use. A flat panel plywood insert with a three-ply panel and a rotary cut red oak veneer face provides a stable center panel with an oak appearance across the door. Oak flat panel doors tie into this construction, giving a continuous door design that matches the Chadwood line. The cabinet carries the Kitchen Kompact CW36B designation, so it aligns with layouts that call out this specific size and series.
The 36 inch width, 34-1/2 inch height, and 24 inch depth of this Chadwood base cabinet give a standard base footprint that fits common countertop and toe space layouts. Solid wood hanging strips located on the top and bottom create defined fastening zones along the back of the cabinet, which helps keep the case pulled tight to the wall in a straight line during mounting. Solid wood corner blocks that are glued and power nailed reinforce the corners of the cabinet box, supporting the structure when the cabinet is set, shimmed, and tied into adjacent units. Solid wood toe kicks, 3/4 inch thick, give the installer a substantial front base section that supports the cabinet face along the floor line.
This Kitchen Kompact 36 inch wide base cabinet fits into layouts that call for a 36W x 34-1/2H x 24D cabinet footprint, allowing it to anchor sink areas or wide base sections. Oak flat panel doors and a flat panel plywood insert with a rotary cut red oak veneer face deliver a consistent Chadwood look across the front of the cabinet, which helps align it visually with other Kitchen Kompact pieces. Solid wood toe kicks, 3/4 inch thick, run along the bottom front, carrying loads from the cabinet face toward the floor, which is important where base units support countertops. Solid wood hanging strips at the top and bottom of the case provide defined fastening areas so the cabinet sits firmly against the wall within a run.
Plywood drawers standard give a rigid box structure inside the cabinet, which supports stored items while resisting routine wear. The front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet for stability, so drawer movement is guided along a fixed path from the front to the rear of the case. Drawers equipped with a ball bearing operated nylon roller system move along their slides with rolling contact, which supports repeatable open and close cycles under normal kitchen loads. Adjustable shelves in the cabinet interior change position, so installers and users can align shelf height with taller or shorter contents without altering the cabinet box. Door frames use mortised and tenoned construction of solid 3/4 inch oak, helping the doors stay square on the concealed, self-closing hinges, which is important for consistent closing action at the face of the cabinet.
The Kitchen Kompact Chadwood base cabinet is 36 inches wide, 34-1/2 inches high, and 24 inches deep, so it aligns with common base cabinet and countertop height standards in kitchen layouts.
The door frames are mortised and tenoned construction of solid 3/4 inch oak with a flat panel plywood insert, which supports square, stable doors with a red oak veneer face for a uniform look.
Plywood drawers standard work with a front to back epoxy-coated drawer system that is securely attached to a solid wood strip, and drawers use a ball bearing operated nylon roller system for guided movement.
The cabinet uses concealed, self-closing hinges on the oak flat panel doors, so the hardware is hidden from the front while supporting automatic closing at the end of the swing.
Solid wood corner blocks are glued and power nailed at key points, tying cabinet sides and frames together so the box resists racking forces once installed in a base run.
The cabinet uses a 4 step process of stain, sealer, sanding, and catalyzed top coat, creating a layered finish system across the oak surfaces.
The Kitchen Kompact Chadwood 36W x 34-1/2H x 24D base cabinet combines mortised and tenoned solid 3/4 inch oak door frames, a three-ply flat panel plywood insert with rotary cut red oak veneer, plywood drawers, and solid wood toe kicks, 3/4 inch thick. For projects specifying the CW36B part number and a Chadwood flat panel door style, this cabinet supplies the defined dimensions and construction details needed to match other Kitchen Kompact units in the same run.
Sold In: 1 Each