Kitchen Kompact Chadwood base cabinet gives a 33 inch wide, 34-1/2 inch high, 24 inch deep base unit built for kitchen runs that need consistent sizing. Door frames use mortised and tenoned construction of solid 3/4 inch oak, creating a rigid face frame that helps doors stay aligned in daily use. The flat panel plywood insert is a three-ply panel with a rotary cut red oak veneer face, so the door center panel keeps a stable surface that takes stain evenly. Oak flat panel doors present a unified appearance across the cabinet front, which helps match other Chadwood pieces in the same line. Solid wood hanging strips located on the top and bottom give solid anchoring points during installation, supporting the cabinet body under load. Solid wood toe kicks at 3/4 inch thick form a sturdy base profile that stands up to normal foot traffic at the floor line.
A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, giving the oak and red oak veneer a complete factory finish that arrives ready for jobsite layout and alignment with adjacent units. Adjustable shelves allow interior spacing to shift as needed after installation, so shelf positions can be set around plumbing, tall items, or workflow zones. Concealed, self-closing hinges on the oak flat panel doors provide hidden hardware that pulls doors closed at the end of travel, which helps doors seat consistently against the frame without manual adjustment each time. Plywood drawers are standard, and the front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet for stability, so drawer motion remains guided along a fixed track. Drawers equipped with a ball bearing operated nylon roller system promote smooth operation along the slides when opening and closing under normal kitchen loading.
This Kitchen Kompact 33 inch wide base cabinet fits into layouts that call for a double-door base centered under a stretch of countertop. The 34-1/2 inch height and 24 inch depth match common base cabinet runs, so it lines up with adjacent Kitchen Kompact cabinets in the same series. Oak flat panel doors and the rotary cut red oak veneer face on the panel create a uniform oak look along the wall, which helps keep a consistent appearance when multiple Chadwood units are ganged. Solid wood toe kicks at 3/4 inch thick tie into the base plane, supporting the front of the cabinet as countertops are set and used. Solid wood hanging strips located on the top and bottom give clear fastening zones to connect the cabinet body within a line of bases. Plywood drawers in the cabinet contribute additional storage volume in the same footprint.
Mortised and tenoned construction of solid 3/4 inch oak at the door frames creates predictable, square corners that support accurate door positioning, which helps reduce hinge tweaking during final adjustment. Solid wood corner blocks that are glued and power nailed brace the cabinet so it stays square when clamped or screwed into place between other units, helping maintain reveals along the face. The 4 step process of stain, sealer, sanding and catalyzed top coat produces a finished surface that arrives ready to join directly into runs, avoiding additional finishing steps on site. Adjustable shelves give flexibility after install, letting the installer set heights that work with each specific kitchen plan. The front to back epoxy-coated drawer system, securely attached to a solid wood strip in the back of the cabinet, provides a fixed reference line for the drawers, which supports smooth slide action with the ball bearing operated nylon roller system. Concealed, self-closing hinges contribute to clean exterior lines and automatic pull-in at closing, supporting consistent door gaps along the full project.
The cabinet is 33 inches wide, 34-1/2 inches high, and 24 inches deep, so it aligns with standard base heights and depths used under typical kitchen countertops.
Door frames use mortised and tenoned construction of solid 3/4 inch oak, which forms tight joints that support long-term door alignment on the cabinet front.
Plywood drawers are standard, and the front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back, providing a stable slide track.
Drawers are equipped with a ball bearing operated nylon roller system, promoting smooth drawer movement during opening and closing in everyday kitchen use.
A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, giving the oak and rotary cut red oak veneer a complete factory-applied finish.
Adjustable shelves and concealed, self-closing hinges are used, so the oak flat panel doors pivot on hidden hinges that pull the doors closed at the end of travel.
This Kitchen Kompact Chadwood CW33B base cabinet delivers a 33 inch wide, 34-1/2 inch high, 24 inch deep unit built with mortised and tenoned solid 3/4 inch oak door frames and oak flat panel doors. The three-ply flat panel plywood insert with a rotary cut red oak veneer face and the 4 step process of stain, sealer, sanding and catalyzed top coat create a consistent finished appearance across the door fronts. Solid wood corner blocks, solid wood hanging strips on the top and bottom, and solid wood toe kicks at 3/4 inch thick work together to support the cabinet structure in a typical kitchen run. Plywood drawers, the front to back epoxy-coated drawer system securely attached to a solid wood strip, and the ball bearing operated nylon roller system provide smooth storage access inside the base. For projects using the Kitchen Kompact Chadwood line, this CW33B cabinet offers a sized, finished, and structurally supported option for base positions.
Sold In: 1 Each