
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood vanity sink base gives you a 30 inch wide, 30-1/2 inch high, 21 inch deep cabinet built for bathroom sink layouts where consistent framing and support matter. The solid 3/4 inch wood frame around the front opening provides a rigid structure that keeps doors and fronts aligned over time, which matters on vanities that see daily use. Because all frames are built of solid 3/4 inch oak, maple or beech, this cabinet supports typical lavatory tops while handling the fastening loads when you attach fronts or hardware to the frame. The recessed panel Glenwood styling sets up a clean, framed look, so finished jobs match other Kitchen Kompact pieces that share this construction. With a defined width, height, and depth, the GWV30S size helps plan runs, filler placement, and clearances around plumbing in a bathroom layout.
The 30 inch width, 30-1/2 inch height, and 21 inch depth of this Glenwood vanity sink base set clear boundaries for rough-in dimensions, helping position plumbing and adjacent cabinets in a bathroom layout. Solid wood hanging strips at the top and bottom give defined bands for anchoring the cabinet to the wall, which supports a secure installation when tying the vanity into studs. The solid 3/4 inch toe kick at the base provides continuous wood for shimming and leveling along the front, helping achieve a straight, even line before setting a vanity top. With solid wood corner blocks tying the corners together, the box stays square, which reduces adjustment time when fitting doors and aligning the front with nearby cabinets.
This Glenwood vanity sink base, identified by manufacturer part number GWV30S and description GLENWOOD V30S, is sized for projects needing a 30 inch wide sink base in a 30-1/2 inch high, 21 inch deep footprint. In practice, that footprint suits standard-depth bathroom layouts where a centered sink base anchors the run. The solid 3/4 inch frame in oak, maple or beech gives a defined front opening for fitting sink cutouts and doors, which matters when matching to typical lavatory tops. End panels built from 3-ply material with a 1/2 inch engineered wood core and hardwood veneers provide finished sides suitable for exposed ends or tight joints to neighboring cabinets, reducing the need for extra panels in many layouts.
The kiln-dried rails, joined by mortise and tenon and glued, form a front frame that resists twist during handling, so installers can rely on straight reference edges when aligning doors and hardware. Solid wood corner blocks that are glued and power nailed lock the cabinet corners together, which helps keep the box square as it is moved into position and fastened, reducing rework when checking level and plumb. Solid 3/4 inch wood toe kicks at the bottom provide a substantial front edge for shims and contact with the floor, important for maintaining alignment across multiple vanities in a line. Solid wood hanging strips at both the top and bottom of the cabinet create strong fastening points for wall and base mounting, distributing loads into solid lumber instead of thin panel, which supports long-term stability. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers balance strength and dimensional stability, which helps doors stay in plane with sides and reduces visible seams as room conditions change.
The GWV30S Glenwood vanity sink base is 30 inches wide, 30-1/2 inches high, and 21 inches deep, which sets clear planning dimensions for bathroom layouts and countertop sizing.
The frame is built of solid 3/4 inch oak, maple or beech, so hinges and fronts mount into solid wood, supporting alignment and long-term stability on frequently used vanity doors.
Each rail is kiln-dried, joined by mortise and tenon, and glued, creating a rigid front frame that resists racking when the vanity is moved, set, and fastened in place.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, offer strong fastening zones into solid wood, improving cabinet attachment to wall studs.
End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing flat, stable sides that help maintain clean joints to adjacent cabinets.
Solid wood toe kicks, 3/4 inch thick, create a sturdy base edge for leveling and shimming, which supports accurate alignment before installing a sink top on the vanity.
This Kitchen Kompact 30 inch Glenwood vanity sink base combines a solid 3/4 inch wood face frame, mortise and tenon joined rails, solid wood corner blocks, and 3-ply end panels with hardwood veneers to support reliable bathroom cabinet work. The 30 inch width, 30-1/2 inch height, and 21 inch depth give defined sizing for rough openings and countertop planning, while solid wood toe kicks and hanging strips provide strong contact points at the floor and wall. Use this GWV30S cabinet when a framed, recessed panel vanity base with robust construction helps streamline installation and alignment.
Sold In: 1 Each