Kitchen Kompact Glenwood vanity sink base GWV36S is a 36 inch wide, 30-1/2 inch high, 21 inch deep vanity cabinet designed to support a sink while providing a solid framed structure. The recessed panel style ties directly to the Glenwood line, so the front appearance matches other Glenwood cabinets in the same project. All frames are built of solid 3/4 inch oak, maple, or beech, which creates a rigid face frame that holds alignment around doors and fronts under normal bathroom use. Each rail is kiln-dried, joined by mortise and tenon, and then glued, so the basic frame resists twisting where the sink cutout and plumbing can otherwise stress the cabinet. Solid wood corner blocks are glued and power nailed, tying the sides, front, and bottom together so the case stays square as it is moved into position and fastened.
This Kitchen Kompact Glenwood V36S vanity cabinet uses solid wood hanging strips on wall and base cabinets at both the top and bottom, so the structure has defined areas that accept fasteners into framing or adjacent cabinetry. The 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers provide sidewalls that stay flat as the unit is positioned, which helps align faces with neighboring cabinets. Solid wood toe kicks at 3/4 inch thickness give the front base section a sturdy edge that supports the cabinet stance and keeps the lower face from flexing under everyday contact. The combination of mortise and tenon frame rails and glued corner blocks keeps the case square, which supports straightforward fitting of a sink top and alignment with finished walls.
The GWV36S Glenwood V36S vanity sink base is sized at 36 inches wide, 30-1/2 inches high, and 21 inches deep, which suits many standard bathroom layouts that use a centered sink over a framed cabinet. Its recessed panel design connects visually with the wider Kitchen Kompact Glenwood series, so it can be planned alongside matching Glenwood cabinets to keep a consistent front profile in a bathroom or adjacent dressing area. The solid 3/4 inch oak, maple, or beech frame gives the face enough rigidity to handle a sink cutout in the top, and it supports door and panel alignment below the sink area where plumbing passes through. With 3 ply end panels built around a 1/2 inch engineered wood core and hardwood veneers, the cabinet sides provide a stable surface against framing or neighboring casework in a typical woodworking installation.
This solid wood frame vanity cabinet uses kiln-dried rails with mortise and tenon joints that are glued, so the main front structure holds square when pulled into position against walls or filler strips. Solid wood corner blocks that are glued and power nailed tie the front, sides, and bottom together, which resists racking when the cabinet is shifted, leveled, or when plumbing openings are cut through the back or floor. Solid wood toe kicks at 3/4 inch thickness create a defined, sturdy lower edge that maintains the cabinet stance as adjacent units are clamped and fastened, helping the finished run present a straight toe line. Solid wood hanging strips located at the top and bottom of wall and base cabinets give installers predictable fastening zones that help distribute loads into framing. The 3 ply end panel construction, with its 1/2 inch engineered wood core and hardwood veneers, adds side stability so fasteners hold without excessive surface distortion, which is important for achieving consistent reveals along doors, drawer fronts, and adjoining Glenwood components.
The GWV36S Glenwood vanity sink base measures 36 inches wide, 30-1/2 inches high, and 21 inches deep, giving a standard footprint for many bathroom layouts and sink top sizes.
This Kitchen Kompact vanity uses solid 3/4 inch oak, maple, or beech frames with kiln-dried rails joined by mortise and tenon and then glued, providing a rigid face frame for alignment.
The solid wood corner blocks are glued and power nailed, tying cabinet corners together so the case resists racking during movement, leveling, and normal bathroom use.
The 3 ply end panels use a 1/2 inch engineered wood core with hardwood veneers, creating stable sides that support fastening and maintain flat surfaces alongside walls or other cabinets.
The 3/4 inch solid wood toe kick gives the vanity a sturdy lower front edge, supporting the cabinet stance and helping maintain a straight toe line with adjoining units.
The solid wood hanging strips at the top and bottom of wall and base cabinets provide defined fastening zones that help keep the cabinet body aligned when secured to framing.
The Kitchen Kompact Glenwood vanity sink base GWV36S combines a solid 3/4 inch oak, maple, or beech frame with kiln-dried, mortise and tenon joined rails, glued corner blocks, and 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers. These construction details support square, stable installation in bathroom projects that call for a 36 inch wide, 30-1/2 inch high, 21 inch deep recessed panel Glenwood cabinet. Choose this unit when the Glenwood style and these specific construction details align with the cabinet run you are building.
Sold In: 1 Each