Warmwood vanity sink base cabinet describes this Kitchen Kompact 48 inch wide, 34-1/2 inch high, 21 inch deep vanity sink base, so installers get a clear fit target for standard bathroom layouts. The recessed panel style supports consistent visual alignment with other Kitchen Kompact cabinets in the same line, helping multi-cabinet runs look uniform. The Kitchen Kompact brand and WWV48ST part number identify this specific Warmwood vanity sink base, which simplifies ordering, jobsite labeling, and future replacements on repeat projects. Solid wood toe kicks, 3/4 inch thick, provide a sturdy front base area that stands up to everyday use in occupied spaces. Solid wood hanging strips on base cabinets, located at the top and bottom, give installers defined structural zones for secure fastening to wall framing where layout allows. All of these construction details support repeatable installation and long-term cabinet performance.
This Kitchen Kompact Warmwood vanity sink base measures 48 inches wide, which suits common double or wider single-vanity layouts where a centered sink cutout is needed. The 34-1/2 inch height positions the cabinet for use with typical countertop thicknesses, supporting standard finished counter heights in bath installations. A 21 inch depth aligns with common bathroom countertop depths, helping the front edge line up with adjacent cabinetry in the same run. Solid wood hanging strips on base cabinets at the top and bottom define consistent fastening zones, which streamlines layout when aligning multiple cabinets along a wall. Solid wood toe kicks at the base keep the cabinet front profile robust while installers level and shim behind the front edge.
This Warmwood vanity sink base cabinet from Kitchen Kompact is part of the Kitchen Kompact cabinet offering, so it aligns with other cabinets in that product class on multi-room jobs that specify this line. The 48 inch width, 34-1/2 inch height, and 21 inch depth give designers and installers predictable sizing when laying out bathroom vanities with coordinated upper or side cabinets. Recessed panel styling on the WWV48ST model supports projects that call for a clean, framed look, helping it blend with other recessed panel pieces in the same finish family. All frames being built of solid 3/4 inch oak, maple, or beech provides a sturdy face frame structure that supports doors, drawer fronts, and hardware alignment through normal use. End panels using 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers create stable sides that sit cleanly against walls, improving the finished appearance in visible locations.
Each rail in this Kitchen Kompact Warmwood vanity sink base is kiln-dried, joined by mortise and tenon, and then glued for added strength, which forms rigid frame joints that stay tight while the cabinet is clamped, leveled, and fastened. Solid wood corner blocks that are glued and power nailed help the cabinet remain square as it is maneuvered into position and as countertops are set on top. Solid wood toe kicks, 3/4 inch thick, create a durable front base section that tolerates shimming and minor jobsite contact while keeping the toe area visually consistent. Solid wood hanging strips on base cabinets, located at the top and bottom, let installers work with defined structural fastening lines when tying the cabinet into wall framing. End panels with a 3-ply, 1/2 inch engineered wood core and hardwood veneers offer balanced construction that responds predictably during scribing to out-of-plumb walls.
The Warmwood vanity sink base measures 48 inches wide, 34-1/2 inches high, and 21 inches deep, which matches common bathroom layouts using standard-depth countertops and typical finished counter heights.
The Kitchen Kompact vanity uses frames built of solid 3/4 inch oak, maple, or beech, giving the front structure strength for hinges, doors, and overall cabinet alignment during and after installation.
The WWV48ST vanity cabinet rails are kiln-dried, joined by mortise and tenon, and then glued, creating rigid joints that help the face frame resist racking during handling and fastening.
The solid wood hanging strips on this base cabinet are located at the top and bottom, giving defined solid-wood areas to anchor the cabinet to wall framing where layout permits.
The end panels have 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing stable, smooth sides suited to wall contact and finishing.
The solid wood toe kicks are 3/4 inch thick, giving a sturdy front base area that stands up to jobsite contact and everyday foot traffic once the vanity is in service.
This Kitchen Kompact Warmwood vanity sink base, model WWV48ST, combines solid wood frames, mortise-and-tenon joints, and 3-ply end panels in a 48 inch by 34-1/2 inch by 21 inch footprint. Those construction and size details support straightforward layout, anchoring, and finishing on bathroom projects where consistent cabinet performance matters. For jobs calling for Kitchen Kompact Warmwood recessed panel styling, this vanity base offers a defined, repeatable choice that aligns with the rest of the line and fits common vanity configurations.
Sold In: 1 Each