
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood vanity sink base anchors a bathroom vanity run as a 42 inch wide sink base, so it sets the layout for the sink, counter, and adjoining cabinets in a consistent Warmwood recessed panel style. The 34-1/2 inch height and 21 inch depth establish standard vanity proportions, which helps align countertop height with common bath fixtures. The recessed panel front defines the face style, allowing installers to match this base with other Kitchen Kompact elements in the same Warmwood collection. The cabinet is classified under Kitchen Kompact cabinets, so it fits into that product line when planning a full room. The manufacturer part number WWV42ST identifies this specific Warmwood 42 inch sink base, which matters when reordering, referencing shop drawings, or coordinating with other trades. The SAP description WARMWOOD V42ST provides another precise identifier for project documentation.
The 42 inch Warmwood vanity sink base uses solid 3/4 inch face-frame material in oak, maple, or beech, which provides a firm front reference for aligning adjoining cabinets during installation. Mortise and tenon joined, kiln-dried rails that are glued give the frame predictable squareness, helping installers set consistent gaps at doors and between units. Solid wood hanging strips at the top and bottom on base cabinets define where the cabinet structure is designed to fasten to wall framing, which supports a secure install along the full height of the back. The 3/4 inch thick solid wood toe kick forms a dependable front base plane, so shimming and leveling can reference a strong, uniform surface across the cabinet run. Solid wood corner blocks that are glued and power nailed help the box stay square as it is moved into position and anchored.
This Kitchen Kompact 42 inch wide Warmwood vanity sink base, identified as WWV42ST, serves as the primary sink cabinet in a vanity layout, so it is typically positioned where plumbing is centered under the planned basin. With a 34-1/2 inch height, it lines up with standard bathroom vanity counter heights, which helps coordinate with mirrors and wall fixtures. The 21 inch depth establishes the front projection of the vanity, affecting floor space and the alignment of adjacent cabinets in the run. The Warmwood recessed panel style matches the Warmwood naming and description, allowing the cabinet to visually coordinate with other Kitchen Kompact Warmwood pieces in the same project. Solid wood toe kicks, 3/4 inch thick, support the front base, which is important under a sink where additional weight from fixtures and countertop is concentrated.
All frames built of solid 3/4 inch oak, maple, or beech give the WWV42ST vanity sink base a substantial face frame, which helps doors and drawer fronts sit flush and operate consistently once aligned. Each kiln-dried rail using mortise and tenon joinery that is glued adds strength at key joints, so the frame maintains its shape as the cabinet is handled, set, and fastened into the room. Solid wood corner blocks that are glued and power nailed tie the sides to the face and back, helping the cabinet resist twisting, which matters when supporting a continuous countertop over 42 inches. Solid wood hanging strips on base cabinets at the top and bottom provide continuous solid material for fastening into wall framing, which supports a firm connection along the cabinet height. End panels built with 3 ply construction and a 1/2 inch engineered wood core with hardwood veneers deliver stable, smooth sides that align well against neighboring cabinets or finished walls, reducing the need for on-site correction. The Warmwood designation and recessed panel description define a specific style, which simplifies coordinating this vanity sink base with other Kitchen Kompact cabinets in design drawings and material schedules.
The Kitchen Kompact Warmwood vanity sink base measures 42 inches wide, 34-1/2 inches high, and 21 inches deep, so it provides a standard-depth, full-width base for a typical bathroom sink and countertop layout.
The Warmwood vanity sink base uses solid 3/4 inch oak, maple, or beech frames with mortise and tenon, glued rails, solid wood corner blocks, and 3 ply end panels, supporting a rigid, stable cabinet structure in service.
The solid wood hanging strips on base cabinets are located at the top and bottom, giving defined areas for fastening into wall framing and helping the cabinet stay secure and aligned along its full height.
The 3/4 inch solid wood toe kick provides a strong front base that carries cabinet and countertop weight and offers a stable surface for leveling and finishing at the floor line.
The end panels use 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving smooth, stable cabinet sides that align well against adjacent cabinets or walls.
The WWV42ST part number designates the Kitchen Kompact Warmwood 42 inch vanity sink base with recessed panel styling, which helps identify this exact cabinet for ordering and project documentation.
The Kitchen Kompact Warmwood vanity sink base WWV42ST combines a 42 inch wide, 34-1/2 inch high, 21 inch deep footprint with solid 3/4 inch wood frames, kiln-dried mortise and tenon rails, solid wood corner blocks, and 3 ply end panels, giving a defined, stable base cabinet for bathroom sink locations. At Wurth Baer Supply, this cabinet sits within the Kitchen Kompact line, so it can be specified alongside matching units when laying out a full project. Use the exact WWV42ST and Warmwood descriptions when adding this recessed panel vanity sink base to takeoffs, room plans, and order lists.
Sold In: 1 Each