Kitchen Kompact valance board is a Warmwood light recessed panel trim piece that finishes open spans in a cabinet run, so you can bridge gaps with a matched, factory-style profile. The Kitchen Kompact 48 inch width gives you a preset span for standard cabinet layouts, which streamlines planning when you are tying together wall cabinets or creating a framed opening. The 5-1/2 inch height sets a consistent reveal line, helping you align this valance with adjacent doors and rails for a clean sightline. The 3/4 inch depth matches typical cabinet component thickness, so the board sits flush with surrounding frames in a straightforward installation. As part of the Kitchen Kompact product class, this Warmwood 48VAL piece keeps material, tone, and style coordinated across your Kitchen Kompact cabinetry for a uniform finished look along the entire elevation.
This recessed panel valance board works as a straight 48 inch span, so you can position it between cabinets without ripping it down for most standard runs. The 3/4 inch depth aligns with cabinet face frames, which helps the front face plane out with adjacent components once fastened through the ends or back. With its 5-1/2 inch overall height, the WW48VAL Warmwood valance fits comfortably under many wall cabinets while still leaving working room beneath, making it practical over sinks or work areas. As a Kitchen Kompact cabinet accessory, it ties directly into Kitchen Kompact layouts, keeping sizing and appearance consistent from one elevation to the next.
The WW48VAL Warmwood 48 inch valance board fits naturally between pairs of wall cabinets when you are creating a framed opening, such as above a sink or work zone. Its 5-1/2 inch height provides enough face to visually connect cabinets while leaving open space beneath for task areas. Because the 3/4 inch thickness tracks with typical cabinet frames, the valance nests into standard Kitchen Kompact layouts without awkward steps at the face. In runs where you are finishing the bottom edge of cabinets, this recessed panel valance keeps the style consistent with other Kitchen Kompact elements, so trim across the room looks like a single coordinated system.
The fixed 48 inch length on this Kitchen Kompact Warmwood valance limits layout guesswork, because you are working with a defined span that matches many common cabinet separations. The 5-1/2 inch height gives you a repeatable dimension to hold from cabinet bottoms, supporting fast replication across multiple openings in the same project. At 3/4 inch thick, the board handles like standard cabinet stock, so cutting returns or shaping ends follows the same routine as other frame components. The recessed panel profile adds visual depth while keeping a flat outer frame, which helps you align edges with stile and rail lines on nearby doors. As a Kitchen Kompact valance, its Warmwood light finish and form stay consistent job to job, so replacements or added sections later in a project still track existing work.
The WW48VAL valance board is 48 inches wide, 5-1/2 inches high, and 3/4 inch deep, so it matches typical cabinet stock and spans many standard wall cabinet openings.
The Kitchen Kompact valance uses a recessed panel design, which adds profile depth while keeping a framed outer edge that lines up well with cabinet rails and stiles.
The 3/4 inch depth matches common cabinet component thickness, so the WW48VAL valance sits flush with face frames for a smooth, unified front surface.
A 48 inch Kitchen Kompact valance often spans between wall cabinets to frame a sink or work area, giving a finished opening that visually ties cabinets together.
The Warmwood light description identifies the finish family for this Kitchen Kompact valance, so it visually coordinates with other Warmwood components in the same kitchen.
This Kitchen Kompact valance is part of the Kitchen Kompact product class, so its dimensions and style are designed to align with Kitchen Kompact cabinetry.
The Kitchen Kompact Warmwood 48 inch valance board delivers a recessed panel span sized for common wall cabinet openings, with 5-1/2 inch height and 3/4 inch depth that track standard cabinet construction. For Warmwood light Kitchen Kompact layouts needing a straightforward, matched trim bridge, the WW48VAL part number ties dimensions, style, and finish into one coordinated solution ready to integrate into your next run.
Sold In: 1 Each