Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood vanity sink base combines a 30 inch width, 34-1/2 inch height, and 21 inch depth to create a standard vanity footprint that fits common bathroom layouts and supports straightforward planning around plumbing and adjoining cabinets. The recessed panel style defines the door appearance, which helps match other recessed panel fronts in the same space for a consistent look across the run. The frame construction is part of the Kitchen Kompact cabinet line, so this unit aligns with other pieces from the same product class during layout and installation. The Warmwood identification ties back to the manufacturer description, which helps installers coordinate this vanity with other Warmwood cabinets in a job. The WWV30ST manufacturer part number clearly identifies this exact 30 inch Warmwood vanity sink base when ordering or matching to drawings and takeoffs.
The 30 inch width allows this vanity sink base to fill a typical single-sink opening, which simplifies layout against standard room dimensions. The 34-1/2 inch height supports pairing with common countertop thicknesses for comfortable finished counter height. The 21 inch depth aligns with standard vanity depths, which helps keep plumbing runs and floor clearances consistent with other bathroom fixtures. Solid wood hanging strips at the top and bottom give a solid fastening surface along the back, helping installers pull the cabinet tight to studs and maintain alignment across a row of cabinets or between walls. The 3/4 inch thick solid wood toe kick builds in structural support at the bottom front, which helps maintain level support under the cabinet and countertop.
This Kitchen Kompact Warmwood 30 inch W x 34-1/2 inch H x 21 inch D vanity sink base fits projects calling for a recessed panel front in a standard vanity size, which is common in single-sink bathrooms. The Warmwood designation aligns with the SAP description WARMWOOD V30ST, so designers and installers can connect drawings, ordering systems, and on-site pieces by the same naming. Being part of the Kitchen Kompact cabinet category keeps this vanity consistent with other Kitchen Kompact units on the job, which helps maintain uniform face frame details and overall styling. The 3/4 inch solid wood frame around the recessed panel supports hinge and door placement at standard locations, which is useful when aligning nearby units and hardware. The engineered wood core end panels with hardwood veneers keep the cabinet sides stable, which matters when the vanity sits between walls or tight framing.
The solid 3/4 inch oak, maple, or beech frame around the recessed panel provides a sturdy anchoring surface for hinges and door adjustments, which helps doors operate consistently once set. Kiln-dried rails joined by mortise and tenon and then glued create rigid joints that hold the frame square, so reveals around doors and drawer fronts stay even after the cabinet is set and loaded. Solid wood corner blocks that are glued and power nailed add strength at stress points, helping the box remain true during transport, setting, and countertop installation. The 3/4 inch solid wood toe kick forms a strong lower front edge, which helps keep the cabinet stable on shims or finished flooring. Solid wood hanging strips at the top and bottom give installers two solid fastening bands, which supports even pull-down to the wall and reduces the tendency for the cabinet to twist when aligned with adjacent units. The 3-ply end panel construction with a 1/2 inch engineered wood core and hardwood veneers offers dimensional stability at the cabinet sides, which supports clean joints to neighboring cabinets or walls and helps finished surfaces stay flat.
The Kitchen Kompact WWV30ST vanity sink base measures 30 inches wide, 34-1/2 inches high, and 21 inches deep, which matches common vanity sizing on project plans.
The vanity uses solid 3/4 inch oak, maple, or beech frames with kiln-dried rails joined by mortise and tenon and glued, supporting a rigid front for doors and hardware.
Solid wood hanging strips located at the top and bottom of base cabinets provide defined fastening areas, helping installers anchor the cabinet evenly to wall framing.
Solid wood corner blocks are glued and power nailed, tying the cabinet corners together so the box stays square under countertop and sink loads.
End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving stable sides suitable for finished exposed ends.
The 3/4 inch solid wood toe kick provides a strong lower front structure, supporting the cabinet at floor level and helping maintain level support for the countertop.
The Kitchen Kompact Warmwood vanity sink base WWV30ST ties a recessed panel style to a 30 inch W x 34-1/2 inch H x 21 inch D footprint, which aligns with standard vanity layouts. Solid 3/4 inch wood frames, kiln-dried mortise-and-tenon rails, and solid wood corner blocks create a box built for everyday cabinet use. Solid wood toe kicks and hanging strips, along with 3-ply end panels with an engineered wood core and hardwood veneers, support stable installation and clean alignment with neighboring pieces. For projects using Kitchen Kompact Warmwood components, this vanity sink base provides a clearly defined part number that fits straight into coordinated bathroom plans.
Sold In: 1 Each