Kitchen Kompact Warmwood vanity sink base gives you a 36 inch wide, 34-1/2 inch high, 21 inch deep cabinet sized for a standard vanity sink layout, so you can plan your bathroom run with known, repeatable dimensions. The Warmwood finish pairs the WWV36ST model with a coordinated look across other Kitchen Kompact pieces in the same product class, helping installers keep finish tones consistent on multi-cabinet jobs. This vanity sink base uses a recessed, flat-panel door style, so the face presents a clean, framed look that matches typical recessed-panel bath designs. With a cabinet from the Kitchen Kompact category, you are working with a defined line and manufacturer part number, which simplifies ordering, layout drawings, and future replacements when a job needs additional matching units.
This Kitchen Kompact Warmwood WWV36ST vanity sink base is defined at 36 inches wide, 34-1/2 inches high, and 21 inches deep, so it fits common bathroom layouts and counter depths where a standard-depth vanity top is specified. The cabinet face and doors are finished with a four step process of stain, sealer, sanding, and a catalyzed top coat, giving the Warmwood color a built-up finish system rather than a single-pass coating. That multi-step sequence builds color with stain, seals the wood, levels with sanding, and then locks the surface under a catalyzed top coat, which is designed as a higher-performance finish layer for everyday bathroom use. Because the door frames are solid maple and the door faces show a hard maple veneer, the Warmwood finish system is applied across genuine maple surfaces, maintaining a consistent species look.
The Kitchen Kompact WWV36ST vanity sink base works into residential bathroom layouts that call for a 36 inch wide vanity, giving enough cabinet width to center a sink while still maintaining interior storage. The 21 inch cabinet depth corresponds to common vanity top depths, so the front face and doors align with standard bathroom counter edges rather than projecting beyond them. At 34-1/2 inches high, this Warmwood cabinet supports typical vanity top and sink assemblies while staying at a height many plans use for bathroom cabinetry, which simplifies matching it to adjacent cabinets from the same Kitchen Kompact category. The recessed panel Warmwood door design ties visually to other Warmwood flat panel cabinets, allowing installers and designers to build a continuous look across a full bathroom suite using the same door style and finish system.
The mortised and tenoned solid 3/4 inch maple door frames on this WWV36ST vanity sink base provide a precise, interlocking corner joint that helps the doors hang true on the concealed, self-closing hinges, which reduces the likelihood of racking that could affect reveals. The solid wood hanging strips at the top and bottom of the back panel give cabinet installers defined structural members for anchoring the 36 x 34-1/2 x 21 vanity base to wall framing, helping the unit stay tight and aligned under the weight of a top and sink. Solid wood corner blocks that are glued and power nailed strengthen the cabinet box during handling, so the case holds its geometry from shop to site and sits square when set on the floor. Inside, the adjustable shelf lets tradespeople position storage to clear supply lines and drains, so the interior can be tailored after rough plumbing is set. The three-ply plywood flat panel with a rotary cut hard maple veneer face combines a hardwood maple appearance with plywood stability, supporting the four step Warmwood stain, sealer, sanding, and catalyzed top coat system for a consistent color and sheen across doors on the job.
The Kitchen Kompact Warmwood WWV36ST vanity sink base measures 36 inches wide, 34-1/2 inches high, and 21 inches deep, so it matches common vanity top sizes and standard bathroom cabinet layouts.
The WWV36ST door frames use mortised and tenoned construction in solid 3/4 inch maple, creating interlocking corners that help the doors stay square and stable on their hinges during regular bathroom use.
The WWV36ST doors use a flat panel plywood insert made from a three-ply panel with a rotary cut hard maple veneer face, giving a maple look with plywood stability in the recessed panel.
The Warmwood WWV36ST uses concealed, self-closing hinges that hide hardware when the doors are shut and pull doors closed, supporting a clean front appearance and consistent closing action.
The Kitchen Kompact Warmwood vanity uses a four step process of stain, sealer, sanding, and a catalyzed top coat, building color and protection across the maple door frames and veneer faces.
The WWV36ST has solid wood hanging strips at the top and bottom, providing defined structural areas at the back where fasteners can tie the 36 inch vanity base to wall framing.
The Kitchen Kompact Warmwood WWV36ST vanity sink base combines a 36 x 34-1/2 x 21 cabinet size with solid maple mortised and tenoned door frames, a maple veneer flat panel, and a four step finish system, giving installers a defined, repeatable unit for bathroom layouts. With concealed, self-closing hinges, solid wood corner blocks, solid wood hanging strips, and an adjustable shelf, this recessed panel Warmwood cabinet offers construction and interior flexibility that supports everyday bath installations. When a project calls for a Warmwood flat panel vanity in this size, selecting the WWV36ST part number ties the job to a specific Kitchen Kompact cabinet that matches the line.
Sold In: 1 Each