Warmwood vanity drawer base describes this Kitchen Kompact 15 inch wide, 30-1/2 inch high, 21 inch deep cabinet that provides a Warmwood finish vanity drawer base with a recessed panel style suited to coordinated bath or utility runs. Door frames use mortised and tenoned construction of solid 3/4 inch maple, which creates a tight, interlocking frame that supports repeated door use in everyday traffic. Solid wood corner blocks are glued and power nailed, so the cabinet body is braced mechanically and chemically for stable joints under normal loading. The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, giving a plywood center panel that presents a maple surface while maintaining panel stability. Solid wood hanging strips located on the top and bottom offer solid mounting contact points during installation, helping the cabinet sit square on the wall and base. A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, providing a controlled finish system that protects the Warmwood appearance during typical cleaning.
This Kitchen Kompact vanity drawer base measures 15 inches wide, 30-1/2 inches high and 21 inches deep, so layout planning can use these fixed dimensions when positioning between other cabinets or walls. Door frames built from solid 3/4 inch maple with mortised and tenoned joints give installers a rigid door assembly that hangs consistently on the concealed, self-closing hinges, which helps doors align with adjacent fronts. Solid wood hanging strips located on the top and bottom create reliable attachment zones across the cabinet width, giving a continuous wood surface for fasteners during mounting runs along a wall. Solid wood corner blocks that are glued and power nailed further tie the cabinet box together, helping it hold square while being positioned, shimmed, or scribed into a run. The three-ply flat panel insert with a rotary cut hard maple veneer face keeps the panel stable within the frame, which supports even reveal lines after installation.
This WWV15D Warmwood vanity drawer base from Kitchen Kompact, listed as WARMWOOD V15D, is sized at 15 inches wide, 30-1/2 inches high and 21 inches deep, so it fits narrow sections in a vanity run or small room layout. The recessed panel front with a flat panel plywood insert and rotary cut hard maple veneer face provides a consistent Warmwood door appearance that aligns visually with other Warmwood cabinets in the Kitchen Kompact line. Solid wood hanging strips at the top and bottom support mounting this vanity drawer base into framed wall structures or alongside adjacent cabinets while keeping the case tied into the run. Solid wood corner blocks, glued and power nailed, help the case stay rigid during transport around the jobsite and during set-in, which supports accurate alignment when tying this cabinet into countertops or neighboring units. The maple flat panel doors and concealed, self-closing hinges work together to present a clean exterior while supporting typical vanity door use.
Door frames built with mortised and tenoned construction of solid 3/4 inch maple deliver a square, interlocked frame around the panel, which helps doors hang flat and close predictably on the concealed, self-closing hinges from one cabinet to the next. The flat panel plywood insert, using a three-ply build with a rotary cut hard maple veneer face, maintains panel stability within the frame, so reveal lines around the recessed panel stay more consistent under normal interior conditions. Solid wood corner blocks, glued and power nailed, brace the cabinet body at critical joints, which reduces racking while cabinets are handled and positioned during installation sequences. Solid wood hanging strips located on the top and bottom give repeatable fastening zones along the cabinet length, simplifying layout when multiple Warmwood vanity units are aligned. The 4 step stain, sealer, sanding and catalyzed top coat process produces a controlled finish system that delivers a uniform Warmwood tone across doors and face frames, helping runs of WWV15D Warmwood cabinets look consistent under jobsite lighting.
The Kitchen Kompact WWV15D Warmwood vanity drawer base is 15 inches wide, 30-1/2 inches high and 21 inches deep, which lets it fit narrow bath layouts or finish small gaps in a vanity run.
The doors use mortised and tenoned construction of solid 3/4 inch maple around a flat panel plywood insert, giving a rigid maple frame with a stable center panel for regular door operation.
The recessed front uses a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, providing a maple-faced center panel within the door frame.
Solid wood hanging strips located on the top and bottom give continuous wood fastening zones, helping the cabinet mount securely and align with adjacent units in a run.
The maple flat panel doors use concealed, self-closing hinges, which hide the hardware from the front while pulling the door shut for a clean Warmwood vanity appearance.
The Warmwood finish uses a 4 step process of stain, sealer, sanding and catalyzed top coat, producing a layered finish system that protects the cabinet surface in normal interior use.
The Kitchen Kompact WWV15D Warmwood vanity drawer base supplies a 15 inch wide, 30-1/2 inch high, 21 inch deep cabinet built with solid 3/4 inch maple door frames, three-ply maple veneer flat panel inserts and solid wood corner blocks for case strength. Solid wood hanging strips at the top and bottom support mounting this unit into bath or utility layouts, while concealed, self-closing hinges and adjustable shelves support practical daily storage. For projects needing a recessed panel Warmwood vanity component that aligns with Kitchen Kompact construction details, this WARMWOOD V15D cabinet can be specified as part of a coordinated run.
Sold In: 1 Each