Kitchen Kompact Warmwood vanity drawer base gives you a 15 inch wide, 34-1/2 inch high, 21 inch deep cabinet built for real job sites. This vanity drawer base uses frames built of solid 3/4 inch oak, maple, or beech, so the face frame stands up to daily use in a bathroom or similar environment. Each rail is kiln-dried, which stabilizes the wood and helps the frame hold size when room conditions change. The rails are joined by mortise and tenon and then glued, creating a tight mechanical joint that keeps corners square during installation and over years of door and drawer operation. Solid wood corner blocks are glued and power nailed, tying the frame together so the cabinet resists racking during handling, transport, and setting. Solid wood toe kicks at 3/4 inch thick support the cabinet base, giving a solid front edge for shimming and finish work.
This Warmwood V15DT vanity drawer base measures 15 inches wide, 34-1/2 inches high, and 21 inches deep, giving a standard cabinet footprint that fits common vanity layouts. The solid wood hanging strips on base cabinets are located at both the top and bottom, so you have defined fastening zones for securing the cabinet to wall studs and tying it into adjoining units. Solid wood toe kicks at 3/4 inch thick create a strong front base, supporting shims and helping align the face frame with neighboring cabinets along the floor line. Solid wood corner blocks, glued and power nailed, stiffen the cabinet body, so it stays square as you level, clamp, and fasten during installation.
This WWV15DT Kitchen Kompact cabinet is a Warmwood vanity drawer base designed around a 15 inch width, so it works in narrow vanity runs or as a filler storage unit beside a sink base. The 34-1/2 inch height supports standard vanity top heights when combined with typical countertop thickness, keeping finished work within expected ergonomic ranges. A 21 inch depth aligns with common bathroom cabinet lines, allowing this drawer base to integrate into full runs without stepped fronts. The recessed panel styling in the Warmwood line ties into other Kitchen Kompact cabinets in the same class, helping maintain a consistent front appearance along the run. Solid wood toe kicks provide a stable base at the front, so the cabinet sits cleanly on finished floors in residential woodworking environments.
This solid wood frame vanity cabinet uses 3/4 inch oak, maple, or beech for the frame, giving a dense material that holds fasteners and helps doors and drawers track consistently over time. Each rail is kiln-dried, which supports accurate milling and reduces seasonal movement at the joints, so reveals stay more uniform after the job is complete. Mortise and tenon joints, glued at assembly, create a mechanical interlock at each corner of the frame, resisting twist and pull when hardware is operated. Solid wood corner blocks are glued and power nailed, tying the face frame and cabinet body together so the box stays square when clamped in a run. Solid wood hanging strips on base cabinets, located at the top and bottom, provide defined backing for mounting screws, helping spread loads and reducing localized stress on the cabinet back. The 3-ply end panels, built with a 1/2 inch engineered wood core and hardwood veneers, balance dimensional stability with a hardwood face, so exposed ends stay flatter and finish work presents cleanly.
The vanity drawer base is 15 inches wide, 34-1/2 inches high, and 21 inches deep, so it fits standard vanity layouts using typical depth and height lines.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, providing a dense hardwood frame that supports fasteners and regular door or drawer operation.
Each rail is kiln-dried, then joined by mortise and tenon and glued, creating a rigid joint that helps keep the frame square and maintains consistent reveals.
The base is supported by solid wood toe kicks that are 3/4 inch thick, giving a solid front edge for shimming against the floor and integrating with trim.
The cabinet uses solid wood corner blocks that are glued and power nailed, bracing the box so it resists racking during transport and setting in a run.
The end panels are 3-ply with a 1/2 inch thick engineered wood core and hardwood veneers, providing flat, stable sides with a hardwood appearance.
This Kitchen Kompact Warmwood vanity drawer base, at 15 inches wide by 34-1/2 inches high by 21 inches deep, offers a known cabinet footprint for tight bathroom runs. Solid 3/4 inch hardwood frames, kiln-dried rails with mortise and tenon joints, solid wood corner blocks, and 3/4 inch solid wood toe kicks combine into a cabinet built for real installation demands. End panels with 3-ply construction and a 1/2 inch engineered core carry hardwood veneers, giving stable sides ready for finishing or alignment against adjacent units. For projects calling for a Warmwood V15DT style vanity drawer base within the Kitchen Kompact line, this cabinet delivers the construction details needed for clean, repeatable work.
Sold In: 1 Each