Kitchen Kompact Warmwood vanity sink base is a 48 inch wide, 30-1/2 inch high, 21 inch deep vanity sink cabinet that provides a framed base for a sink in a bath layout where those dimensions match the planned footprint. The cabinet uses a recessed panel design, which presents a flat center panel surrounded by a frame, giving a defined face layout that suits projects calling for this panel style. Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating interlocking joints that help the doors stay square as they are opened and closed over time. The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, so the door centers show a consistent maple appearance that aligns with the Warmwood finish.
This Kitchen Kompact vanity sink base uses a Warmwood finish identified as WARMWOOD V48S, aligning the exterior appearance with other Warmwood pieces carrying the same naming. The recessed panel maple flat panel doors match the Vanity Sink Base style, so the face design remains consistent across the cabinet. Concealed, self-closing hinges operate the doors, guiding them shut without an exposed hinge barrel on the face frame side. Solid wood hanging strips at the top and bottom give defined zones where fasteners bite into wood, helping the installer tie the cabinet into framing while keeping the rear alignment true. Adjustable shelves inside the base respond to the presence of drain and supply lines by allowing shelf heights to be set around those lines while maintaining practical storage.
The Kitchen Kompact 48 inch Warmwood vanity sink base WWV48S is sized for an opening that needs a 48 inch wide, 30-1/2 inch high, 21 inch deep cabinet, so it can occupy a central sink position between filler strips or adjoining cabinets that align to those dimensions. Door frames built from solid 3/4 inch maple present a robust face edge, supporting hinge mounting and daily use as doors are pulled open from the front. The three-ply flat panel insert with rotary cut hard maple veneer face keeps the door center panel lighter than a solid slab while retaining a maple surface that visually coordinates with the Warmwood finish. Solid wood corner blocks that are glued and power nailed further secure the case joints, so the cabinet body resists twist as countertops and sinks are set on top. Solid wood hanging strips on both top and bottom edges of the back give the installer continuous nailing and screwing zones, tying the unit to wall studs or neighboring pieces for a straight, continuous run.
The mortised and tenoned solid 3/4 inch maple door frames create precise joints between stiles and rails, helping the doors hold alignment with the face frame so reveals stay consistent across the Warmwood recessed panel vanity sink base. The rotary cut hard maple veneer face on the three-ply flat panel insert gives a continuous maple grain look on each door center, so finishing with the four step process of stain, sealer, sanding, and catalyzed top coat results in a unified Warmwood surface. Solid wood corner blocks that are both glued and power nailed tie adjacent cabinet panels together, supporting the cabinet structure when plumbing cutouts, sink loads, and countertop weight act on the case. Solid wood hanging strips on the top and bottom edges create deliberate structural members where wall fasteners engage, helping the cabinet stay plumb and level after fastening. Concealed, self-closing hinges mounted to the maple door frames give controlled closing at the end of the swing, reducing door rebound while keeping hinge hardware out of the visible front line.
The Kitchen Kompact Warmwood vanity sink base measures 48 inches wide, 30-1/2 inches high, and 21 inches deep, which sets the footprint and opening size it occupies in a bath layout.
The vanity doors have mortised and tenoned solid 3/4 inch maple frames with a three-ply flat panel insert featuring a rotary cut hard maple veneer face, giving a framed recessed panel design.
The cabinet uses solid wood corner blocks that are glued and power nailed, tying the cabinet corners together so the case stays rigid under countertop, sink, and daily use loads.
The cabinet uses adjustable shelves for interior storage layout and concealed, self-closing hinges on the doors, so shelf height can be set while doors close smoothly without visible hinge hardware.
The Warmwood WWV48S receives a four step process of stain, sealer, sanding, and catalyzed top coat, building a finished surface suited to typical bath room use conditions.
The cabinet has solid wood hanging strips on the top and bottom, so fasteners engage continuous wood members when the vanity is anchored to wall framing or adjacent cabinets.
The Kitchen Kompact 48 inch Warmwood vanity sink cabinet WWV48S pairs its recessed panel maple doors with a case supported by solid wood corner blocks and hanging strips, giving both a defined face style and a reinforced structure. The four step stain, sealer, sanding, and catalyzed top coat process works with the rotary cut hard maple veneer door panels to present a Warmwood finish that aligns with other WARMWOOD V48S pieces. For bath runs calling for a 48 inch wide, 30-1/2 inch high, 21 inch deep sink location, this vanity sink base offers a sized cabinet with adjustable shelves and concealed, self-closing hinges, ready to be integrated into the overall cabinet layout.
Sold In: 1 Each